component
RTL8201CP-VD-LF
Public Made by Adomby adom
Realtek Semicon Ethernet Transceivers, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
rtl8201cp-vd-lf: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
fa113db
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415
{
"slug": "rtl8201cp-vd-lf",
"version": "0.1.0",
"type": "component",
"description": "Realtek Semicon Ethernet Transceivers, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"rtl8201cp-vd-lf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rtl8201cp-vd-lf.kicad_sym",
"rtl8201cp-vd-lf.kicad_mod",
"rtl8201cp-vd-lf.glb",
"rtl8201cp-vd-lf.step",
"rtl8201cp-vd-lf.lbr",
"docs/hero.png",
"docs/rtl8201cp-vd-lf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "RTL8201CP-VD-LF",
"manufacturer": "Realtek Semicon",
"package": "LQFP-48(7x7)",
"pin_count": 48,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172168845189120",
"parts": {
"symbol": "rtl8201cp-vd-lf.kicad_sym",
"footprint": "rtl8201cp-vd-lf.kicad_mod",
"model_3d": "rtl8201cp-vd-lf-etched.glb",
"model_3d_plain": "rtl8201cp-vd-lf.glb",
"model_3d_step": "rtl8201cp-vd-lf-etched.step",
"model_3d_step_plain": "rtl8201cp-vd-lf.step",
"lbr": "rtl8201cp-vd-lf.lbr"
},
"distributor_links": {
"lcsc": "C10018"
},
"pins": [
{
"number": "1",
"name": "COL",
"type": "bidirectional",
"description": "Collision Detect; LI/O latched during power-up/reset to configure LED mode; asserts high when collision detected on media through transformer."
},
{
"number": "2",
"name": "TXEN",
"type": "input",
"description": "Transmit Enable; input indicates presence of valid nibble data on TXD[3:0] to PHY for transmission."
},
{
"number": "3",
"name": "TXD3",
"type": "input",
"description": "Transmit Data[3]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."
},
{
"number": "4",
"name": "TXD2",
"type": "input",
"description": "Transmit Data[2]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."
},
{
"number": "5",
"name": "TXD1",
"type": "input",
"description": "Transmit Data[1]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."
},
{
"number": "6",
"name": "TXD0",
"type": "input",
"description": "Transmit Data[0]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."
},
{
"number": "7",
"name": "TXC",
"type": "output",
"description": "Transmit Clock; provides continuous clock as timing reference for TXD[3:0] and TXEN at 25MHz (100Mbps) or 2.5MHz (10Mbps)."
},
{
"number": "8",
"name": "PWFBIN",
"type": "input",
"description": "Power Feedback Input; receives 1.8V output from PWFBOUT through ferrite bead as part of internal voltage conversion circuit."
},
{
"number": "9",
"name": "LED0/PHYAD0",
"type": "bidirectional",
"description": "PHY Address[0] / Link LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Link LED status output."
},
{
"number": "10",
"name": "LED1/PHYAD1",
"type": "bidirectional",
"description": "PHY Address[1] / Full Duplex LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Full Duplex LED status output."
},
{
"number": "11",
"name": "DGND",
"type": "power_in",
"description": "Digital Ground; should be connected to larger GND plane for optimal performance."
},
{
"number": "12",
"name": "LED2/PHYAD2",
"type": "bidirectional",
"description": "PHY Address[2] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 10-Activity LED blinking on transmit/receive; BL mode: Link 10/Activity."
},
{
"number": "13",
"name": "LED3/PHYAD3",
"type": "bidirectional",
"description": "PHY Address[3] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 100-Activity LED blinking on transmit/receive; BL mode: Link 100/Activity."
},
{
"number": "14",
"name": "DVDD33",
"type": "power_in",
"description": "3.3V Digital Power Input; 3.3V power supply for digital circuit."
},
{
"number": "15",
"name": "LED4/PHYAD4",
"type": "bidirectional",
"description": "PHY Address[4] / Collision LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Collision LED that blinks when collisions occur."
},
{
"number": "16",
"name": "RXC",
"type": "output",
"description": "Receive Clock; provides continuous clock reference for RXDV and RXD[0..3] signals at 25MHz (100Mbps) or 2.5MHz (10Mbps)."
},
{
"number": "17",
"name": "DGND",
"type": "power_in",
"description": "Digital Ground; should be connected to larger GND plane for optimal performance."
},
{
"number": "18",
"name": "RXD3",
"type": "output",
"description": "Receive Data[3]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."
},
{
"number": "19",
"name": "RXD2",
"type": "output",
"description": "Receive Data[2]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."
},
{
"number": "20",
"name": "RXD1",
"type": "output",
"description": "Receive Data[1]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."
},
{
"number": "21",
"name": "RXD0",
"type": "output",
"description": "Receive Data[0]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."
},
{
"number": "22",
"name": "RXDV",
"type": "output",
"description": "Receive Data Valid; asserts high when received data present on RXD[3:0]; de-asserts at packet end; valid on rising edge of RXC."
},
{
"number": "23",
"name": "CRS",
"type": "bidirectional",
"description": "Carrier Sense; LI/O latched during power-up/reset for mode configuration; asserts high when media not in Idle state."
},
{
"number": "24",
"name": "RXER/FXEN",
"type": "bidirectional",
"description": "Receive Error / Fiber/UTP Enable; LI/O latched during power-up/reset to select media mode (1=Fiber mode, 0=UTP mode); after power-on operates as Receive Error output."
},
{
"number": "25",
"name": "MDC",
"type": "input",
"description": "Management Data Clock; provides clock synchronous to MDIO for serial management interface; may be asynchronous to TXC/RXC; up to 2.5MHz maximum."
},
{
"number": "26",
"name": "MDIO",
"type": "bidirectional",
"description": "Management Data Input/Output; bi-directional signal used to transfer management information via MDC/MDIO serial interface."
},
{
"number": "27",
"name": "NC",
"type": "unconnected",
"description": "Not Connected; no connection required or permitted."
},
{
"number": "28",
"name": "RTSET",
"type": "input",
"description": "Transmit Bias Resistor Connection; must be pulled to GND by 2KΩ (1%) resistor to define driving current for transmit DAC."
},
{
"number": "29",
"name": "AGND",
"type": "power_in",
"description": "Analog Ground; should be connected to larger GND plane for optimal performance."
},
{
"number": "30",
"name": "TPRX-",
"type": "input",
"description": "Receive Input (Negative); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer."
},
{
"number": "31",
"name": "TPRX+",
"type": "input",
"description": "Receive Input (Positive); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer."
},
{
"number": "32",
"name": "PWFBOUT",
"type": "output",
"description": "Power Feedback Output; 1.8V output from internal voltage regulator; requires 22µF tantalum and 0.1µF capacitor for compensation/de-coupling; connected to PWFBIN through ferrite bead."
},
{
"number": "33",
"name": "TPTX-",
"type": "output",
"description": "Transmit Output (Negative); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T)."
},
{
"number": "34",
"name": "TPTX+",
"type": "output",
"description": "Transmit Output (Positive); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T)."
},
{
"number": "35",
"name": "AGND",
"type": "power_in",
"description": "Analog Ground; should be connected to larger GND plane for optimal performance."
},
{
"number": "36",
"name": "AVDD33",
"type": "power_in",
"description": "3.3V Analog Power Input; 3.3V power supply for analog circuit; should be well decoupled."
},
{
"number": "37",
"name": "ANE",
"type": "input",
"description": "Auto-Negotiation Enable; LI latched during power-up/reset; pull high (default) to enable auto-negotiation, low to disable and activate parallel detection."
},
{
"number": "38",
"name": "DUPLEX",
"type": "input",
"description": "Duplex Mode; LI latched during power-up/reset; pull high for full duplex mode, low for half duplex mode; can be directly connected to GND or VCC."
},
{
"number": "39",
"name": "SPEED",
"type": "input",
"description": "Speed Mode; LI latched during power-up/reset; pull high for 100Mbps operation, low for 10Mbps operation; can be directly connected to GND or VCC."
},
{
"number": "40",
"name": "RPTR",
"type": "input",
"description": "Repeater Mode; pull high to enable repeater mode (default low for NIC/Switch mode); can be directly connected to GND or VCC."
},
{
"number": "41",
"name": "LDPS",
"type": "input",
"description": "Link Down Power Saving; pull high to enable LDPS mode for 60-80% power reduction when link down (default low); can be directly connected to GND or VCC."
},
{
"number": "42",
"name": "RESETB",
"type": "input",
"description": "Reset; pull low to reset chip; must be asserted low for minimum 10ms for complete reset; pull high for normal operation."
},
{
"number": "43",
"name": "ISOLATE",
"type": "input",
"description": "Isolation; set high to isolate RTL8201CP from MAC and MDC/MDIO interface for minimum power consumption; can be directly connected to GND or VCC."
},
{
"number": "44",
"name": "MII/SNIB",
"type": "input",
"description": "MII/SNI Mode Select; LI latched during power-up/reset; pull high (default) for MII mode, low for SNI mode (10Mbps only); can be directly connected to GND or VCC."
},
{
"number": "45",
"name": "DGND",
"type": "power_in",
"description": "Digital Ground; should be connected to larger GND plane for optimal performance."
},
{
"number": "46",
"name": "X1",
"type": "input",
"description": "25MHz Crystal Input; accepts 25MHz crystal input or external 25MHz oscillator output; drives internal PLL."
},
{
"number": "47",
"name": "X2",
"type": "output",
"description": "25MHz Crystal Output; provides 25MHz crystal output; leave open when external 25MHz oscillator drives X1."
},
{
"number": "48",
"name": "DVDD33",
"type": "power_in",
"description": "3.3V Digital Power Input; 3.3V power supply for digital circuit."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 38,
"cost_usd": 0.5678,
"at": "2026-09-21T22:02:06"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172168845189120",
"pages": 38,
"sha256": "fe7b3b45b8e89e51",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rtl8201cp-vd-lf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.5
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "rtl8201cp-vd-lf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.5
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "fae72186836b489838a4c1cf420e0952d323ee0c7acfbce4aab6a8b8d8af4d6a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}