main
Ray Publish 0.1.0 d7e4607
{
  "slug": "rtl8189es-vb-cg",
  "version": "0.1.0",
  "type": "component",
  "description": "Realtek Semicon RF Transceiver ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf & radio",
    "rtl8189es-vb-cg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rtl8189es-vb-cg.kicad_sym",
    "rtl8189es-vb-cg.kicad_mod",
    "rtl8189es-vb-cg.glb",
    "rtl8189es-vb-cg.step",
    "rtl8189es-vb-cg.lbr",
    "docs/hero.png",
    "docs/rtl8189es-vb-cg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rtl8189es-vb-cg-hero.glb",
    "rtl8189es-vb-cg-hero.overlay.json",
    "rtl8189es-vb-cg-etched.glb"
  ],
  "component": {
    "mpn": "RTL8189ES-VB-CG",
    "manufacturer": "Realtek Semicon",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "RF & Radio",
    "subcategory": "RF Transceiver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c2d942bf94395e78cd88e284e58a8508.pdf",
    "parts": {
      "symbol": "rtl8189es-vb-cg.kicad_sym",
      "footprint": "rtl8189es-vb-cg.kicad_mod",
      "model_3d": "rtl8189es-vb-cg-hero.glb",
      "model_3d_plain": "rtl8189es-vb-cg-etched.glb",
      "model_3d_step": "rtl8189es-vb-cg-etched.step",
      "model_3d_step_plain": "rtl8189es-vb-cg.step",
      "lbr": "rtl8189es-vb-cg.lbr"
    },
    "distributor_links": {
      "lcsc": "C2691978"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T18:33:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TXPA_OP",
        "type": "output",
        "description": "RF TX positive signal output from the power amplifier."
      },
      {
        "number": "2",
        "name": "TXPA_ON",
        "type": "output",
        "description": "RF TX negative signal output from the power amplifier."
      },
      {
        "number": "3",
        "name": "VD33PAD",
        "type": "power_in",
        "description": "3.3V supply for the PAD circuitry."
      },
      {
        "number": "4",
        "name": "RXIP",
        "type": "input",
        "description": "RF receive positive signal input."
      },
      {
        "number": "5",
        "name": "RXIN",
        "type": "input",
        "description": "RF receive negative signal input."
      },
      {
        "number": "6",
        "name": "VD12R",
        "type": "power_in",
        "description": "1.2V supply for analog circuitry; Table 9 gives the 1.2V core supply range as 1.10 V to 1.32 V."
      },
      {
        "number": "7",
        "name": "VD12S",
        "type": "power_in",
        "description": "1.2V supply for analog circuitry; Table 9 gives the 1.2V core supply range as 1.10 V to 1.32 V."
      },
      {
        "number": "8",
        "name": "VD33S",
        "type": "power_in",
        "description": "3.3V supply for analog circuitry; Table 9 gives the 3.3V I/O supply range as 3.0 V to 3.6 V."
      },
      {
        "number": "9",
        "name": "XO",
        "type": "output",
        "description": "Output of the crystal clock reference oscillator."
      },
      {
        "number": "10",
        "name": "XI",
        "type": "input",
        "description": "Oscillator input for the crystal clock reference, which can be 40, 13, 19.2, 20, 25, 26, 38.4, 17.664, 16, 14.318 or 12 MHz."
      },
      {
        "number": "11",
        "name": "VD33A",
        "type": "power_in",
        "description": "3.3V supply for analog circuitry; Table 9 gives the range as 3.0 V to 3.6 V."
      },
      {
        "number": "12",
        "name": "VD12A",
        "type": "power_in",
        "description": "1.2V supply for analog circuitry; Table 9 gives the range as 1.10 V to 1.32 V."
      },
      {
        "number": "13",
        "name": "VD12D",
        "type": "power_in",
        "description": "1.2V supply for digital circuitry; Table 9 gives the range as 1.10 V to 1.32 V."
      },
      {
        "number": "14",
        "name": "GND_SPS",
        "type": "power_in",
        "description": "Ground for the switching regulator."
      },
      {
        "number": "15",
        "name": "LX_SPS",
        "type": "power_out",
        "description": "Switching regulator output node."
      },
      {
        "number": "16",
        "name": "VDSPS33",
        "type": "power_in",
        "description": "Switching regulator input, or linear regulator output from 3.3V to 1.5V, depending on the configuration."
      },
      {
        "number": "17",
        "name": "VD33A",
        "type": "power_in",
        "description": "3.3V supply for analog circuitry; Table 9 gives the range as 3.0 V to 3.6 V."
      },
      {
        "number": "18",
        "name": "VDIO_SDIO",
        "type": "power_in",
        "description": "Supply for the SDIO pins; it must match the SDIO bus signal level, which ranges from 3.3V to 1.8V."
      },
      {
        "number": "19",
        "name": "SD_D0",
        "type": "bidirectional",
        "description": "SDIO data line 0; in GSPI mode this pin is SPI_MISO (GSPI data out)."
      },
      {
        "number": "20",
        "name": "SD_D1",
        "type": "bidirectional",
        "description": "SDIO data line 1; in GSPI mode this pin is SPI_SCSn (GSPI chip select, active low)."
      },
      {
        "number": "21",
        "name": "SD_CLK",
        "type": "input",
        "description": "SDIO clock input; in GSPI mode this pin is SPI_CLK. SDIO clock rate is up to 100 MHz per the features list, and Table 13 gives 0-25 MHz default and 0-50 MHz high-speed."
      },
      {
        "number": "22",
        "name": "SD_CMD",
        "type": "bidirectional",
        "description": "SDIO command line; in GSPI mode this pin is SPI_MOSI (GSPI data input)."
      },
      {
        "number": "23",
        "name": "SD_D2",
        "type": "bidirectional",
        "description": "SDIO data line 2; in GSPI mode this pin is SPI_SIRQ (GSPI interrupt output)."
      },
      {
        "number": "24",
        "name": "SD_D3",
        "type": "bidirectional",
        "description": "SDIO data line 3."
      },
      {
        "number": "25",
        "name": "PDn",
        "type": "input",
        "description": "Externally shuts down the RTL8189ES-VB without requiring an extra power switch."
      },
      {
        "number": "26",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "Active-low LED output (LED2), shared with GPIO5 and CLK_REQ, which is used by the chip to request the system clock from the host; the function is selected via a control register."
      },
      {
        "number": "27",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General-purpose input/output pin."
      },
      {
        "number": "28",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General-purpose input/output pin."
      },
      {
        "number": "29",
        "name": "GPIO1 / SPS_LDO_SEL",
        "type": "bidirectional",
        "description": "General-purpose input/output pin; trap function: weakly pull low to enable the integrated switching regulator, or weakly pull high to enable the integrated linear regulator."
      },
      {
        "number": "30",
        "name": "VD33IO",
        "type": "power_in",
        "description": "3.3V supply for digital I/O; Table 9 gives the range as 3.0 V to 3.6 V (Table 9 labels this supply VD33D)."
      },
      {
        "number": "31",
        "name": "VD12D",
        "type": "power_in",
        "description": "1.2V supply for digital circuitry; Table 9 gives the range as 1.10 V to 1.32 V."
      },
      {
        "number": "32",
        "name": "GPIO6 / TEST_MODE_SEL",
        "type": "bidirectional",
        "description": "General-purpose input/output pin; trap function: weakly pull low to let the chip enter normal operation mode."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package has an exposed thermal/ground pad typical of QFN-32-EP, but the datasheet text does not ; Figure 2 (pin assignment drawing) is not present as text; pin numbers and functions were taken from ; Pin 16 VDSPS33 is described as either a switching regulator input or a linear regulator output, so i",
          "exposed pad 33 added from the footprint",
          "1/33 pins cited to the wrong page (name found elsewhere): ['10:XI@p11']",
          "1/33 pin names appear NOWHERE in the datasheet text: ['9:XO@p11']"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0886,
        "at": "2026-11-05T18:33:26"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/c2d942bf94395e78cd88e284e58a8508.pdf",
        "pages": 19,
        "sha256": "44ad30d46d987eb5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rtl8189es-vb-cg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rtl8189es-vb-cg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5703b65435a1525b89cfc11ccdbfe9e68ff4fabe3519484e18fe9584eb567568",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "QFN-32",
      "source_page": 18,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 5.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.85,
        "range_mm": [
          0.8,
          0.9
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "rtl8189es-vb-cg.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}