main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rtl8189es-vb-cg: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
rtl8189es-vb-cg-etched.glb Publish 0.1.0 · Ray
rtl8189es-vb-cg-etched.step rtl8189es-vb-cg: factory component page (tier=lcsc) · Ray
rtl8189es-vb-cg-hero.glb rtl8189es-vb-cg: hero GLB from the etched model (keeps the MPN mark) · Ray
rtl8189es-vb-cg-hero.overlay.json Publish 0.1.0 · Ray
rtl8189es-vb-cg.glb Publish 0.1.0 · Ray
rtl8189es-vb-cg.kicad_mod Publish 0.1.0 · Ray
rtl8189es-vb-cg.kicad_sym Publish 0.1.0 · Ray
rtl8189es-vb-cg.lbr Publish 0.1.0 · Ray
rtl8189es-vb-cg.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 33 pins · Ray

RTL8189ES-VB-CG

Realtek Semicon · RF Transceiver ICs · QFN-32-EP(5x5)

RTL8189ES-VB-CG from Realtek Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXPA_OP output RF TX positive signal output from the power amplifier.
2 TXPA_ON output RF TX negative signal output from the power amplifier.
3 VD33PAD power_in 3.3V supply for the PAD circuitry.
4 RXIP input RF receive positive signal input.
5 RXIN input RF receive negative signal input.
6 VD12R power_in 1.2V supply for analog circuitry; Table 9 gives the 1.2V core supply range as 1.10 V to 1.32 V.
7 VD12S power_in 1.2V supply for analog circuitry; Table 9 gives the 1.2V core supply range as 1.10 V to 1.32 V.
8 VD33S power_in 3.3V supply for analog circuitry; Table 9 gives the 3.3V I/O supply range as 3.0 V to 3.6 V.
9 XO output Output of the crystal clock reference oscillator.
10 XI input Oscillator input for the crystal clock reference, which can be 40, 13, 19.2, 20, 25, 26, 38.4, 17.664, 16, 14.318 or 12 MHz.
11 VD33A power_in 3.3V supply for analog circuitry; Table 9 gives the range as 3.0 V to 3.6 V.
12 VD12A power_in 1.2V supply for analog circuitry; Table 9 gives the range as 1.10 V to 1.32 V.
13 VD12D power_in 1.2V supply for digital circuitry; Table 9 gives the range as 1.10 V to 1.32 V.
14 GND_SPS power_in Ground for the switching regulator.
15 LX_SPS power_out Switching regulator output node.
16 VDSPS33 power_in Switching regulator input, or linear regulator output from 3.3V to 1.5V, depending on the configuration.
17 VD33A power_in 3.3V supply for analog circuitry; Table 9 gives the range as 3.0 V to 3.6 V.
18 VDIO_SDIO power_in Supply for the SDIO pins; it must match the SDIO bus signal level, which ranges from 3.3V to 1.8V.
19 SD_D0 bidirectional SDIO data line 0; in GSPI mode this pin is SPI_MISO (GSPI data out).
20 SD_D1 bidirectional SDIO data line 1; in GSPI mode this pin is SPI_SCSn (GSPI chip select, active low).
21 SD_CLK input SDIO clock input; in GSPI mode this pin is SPI_CLK. SDIO clock rate is up to 100 MHz per the features list, and Table 13 gives 0-25 MHz default and 0-50 MHz high-speed.
22 SD_CMD bidirectional SDIO command line; in GSPI mode this pin is SPI_MOSI (GSPI data input).
23 SD_D2 bidirectional SDIO data line 2; in GSPI mode this pin is SPI_SIRQ (GSPI interrupt output).
24 SD_D3 bidirectional SDIO data line 3.
25 PDn input Externally shuts down the RTL8189ES-VB without requiring an extra power switch.
26 GPIO5 bidirectional Active-low LED output (LED2), shared with GPIO5 and CLK_REQ, which is used by the chip to request the system clock from the host; the function is selected via a control register.
27 GPIO7 bidirectional General-purpose input/output pin.
28 GPIO4 bidirectional General-purpose input/output pin.
29 GPIO1 / SPS_LDO_SEL bidirectional General-purpose input/output pin; trap function: weakly pull low to enable the integrated switching regulator, or weakly pull high to enable the integrated linear regulator.
30 VD33IO power_in 3.3V supply for digital I/O; Table 9 gives the range as 3.0 V to 3.6 V (Table 9 labels this supply VD33D).
31 VD12D power_in 1.2V supply for digital circuitry; Table 9 gives the range as 1.10 V to 1.32 V.
32 GPIO6 / TEST_MODE_SEL bidirectional General-purpose input/output pin; trap function: weakly pull low to let the chip enter normal operation mode.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Realtek Semicon
Package QFN-32-EP(5x5)
Category RF & Radio
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Clock Low Time TWL 10 ns Default mode 10
Clock Low Time TWL 7 ns HS mode 10
Clock High Time TWH 10 ns Default mode 10
Clock High Time TWH 7 ns HS mode 10
Input Setup Time TISU 5 ns Default mode 10
Input Setup Time TISU 6 ns HS mode 10
Input Hold Time TIH 5 ns Default mode 10
Input Hold Time TIH 2 ns HS mode 10
Output Delay Time TODLY 14 ns Default mode 10
Tpor Tpor 2 2 8 ms SDIO power-on typical timing specification 11
Tnon-rdy Tnon-rdy 1 2 10 ms SDIO power-on typical timing specification 11

CAD (KiCad official)

  • Symbol: RTL8189ES-VB-CG
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: rtl8189es-vb-cg-etched.step / rtl8189es-vb-cg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rtl8189es-vb-cg.step / rtl8189es-vb-cg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Realtek Semicon datasheet (19 pp, sha256 44ad30d46d987eb5, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF