main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rt9193-30gb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rt9193-30gb: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rt9193-30gb: specified limits as data (metadata.characteristics, 29 rows from the datasheet) · Ray
rt9193-30gb-etched.fit.json rt9193-30gb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rt9193-30gb-hero.glb rt9193-30gb: hero from the plain model · Ray
rt9193-30gb-hero.overlay.json rt9193-30gb: hero from the plain model · Ray
rt9193-30gb.glb Publish 0.1.0 · Ray
rt9193-30gb.kicad_mod Publish 0.1.0 · Ray
rt9193-30gb.kicad_sym Publish 0.1.0 · Ray
rt9193-30gb.lbr Publish 0.1.0 · Ray
rt9193-30gb.step Publish 0.1.0 · Ray

RT9193-30GB

Richtek Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

RT9193-30GB from Richtek Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6V). Bypass with 1µF X7R ceramic to GND close to the pin.
2 GND power_in Device ground reference for the regulator, EN logic and BP bypass network.
3 EN input Chip Enable, active-high TTL-logic input (VIH ≥ 1.2V, VIL ≤ 0.4V, 0-5.5V range). High-impedance pin (IBSD ≤ 100nA); tie through a 100kΩ pull-down to GND if the drive signal can float. Drive to GND for <0.01µA shutdown.
4 BP passive Reference noise bypass. Connect a 22nF ceramic capacitor between BP and GND for lowest output noise (typ 100µVRMS, 10Hz-100kHz). May be left floating if noise performance is not critical.
5 VOUT power_out Regulated output voltage (3.0V for the -30 option). Delivers up to 300mA with 220mV dropout at 300mA. Requires only 1µF X7R ceramic to GND for stability; low-ESR ceramic capacitors are supported.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • RT9193-30GBB
  • RT9193-30GBU5
  • RT9193-30GBJ5
  • RT9193-30GBQW
  • RT9193-30GBF

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy ΔVOUT -2 2 % IOUT = 1mA 3
Current Limit ILIM 360 400 mA RLOAD = 1Ω 3
Quiescent Current IQ 90 130 μA VEN ≥ 1.2V, IOUT = 0mA 3
Dropout Voltage VDROP 170 200 mV IOUT = 200mA, VOUT > 2.8V 3
Dropout Voltage VDROP 220 300 mV IOUT = 300mA, VOUT > 2.8V 3
Line Regulation ΔVLINE 0.3 % VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA 3
Load Regulation ΔVLOAD 0.6 % 1mA < IOUT < 300mA 3
Standby Current ISTBY 0.01 1 μA VEN = GND, Shutdown 3
EN Input Bias Current IIBSD 0 100 nA VEN = GND or VIN 4
EN Threshold Logic-Low Voltage VIL 0.4 V VIN = 3V to 5.5V, Shutdown 4
EN Threshold Logic-High Voltage VIH 1.2 V VIN = 3V to 5.5V, Start-Up 4
Output Noise Voltage eNO 100 μVRMS 10Hz to 100kHz, IOUT = 200mA, COUT = 1μF 4
Power Supply Rejection Rate PSRR -70 dB f = 100Hz 4
Power Supply Rejection Rate PSRR -50 dB f = 10kHz, COUT = 1μF, IOUT = 10mA 4
Thermal Shutdown Temperature TSD 165 °C 4
Thermal Shutdown Temperature (hysteresis) ΔTSD 30 °C 4
Supply Input Voltage 2.5 5.5 V 3
EN Input Voltage 0 5.5 V 3
Junction Temperature Range -40 125 °C 3
Ambient Temperature Range -40 85 °C 3
Supply Input Voltage 6 V 3
Power Dissipation, TSOT-23-5/SOT-23-5 PD 400 mW TA = 25°C 3
Junction Temperature 150 °C 3
Lead Temperature (Soldering) 260 °C 10 sec 3
Storage Temperature Range -65 150 °C 3
ESD Susceptibility HBM 2 kV Human Body Model 3
ESD Susceptibility MM 200 V Machine Model 3
Package Thermal Resistance, TSOT-23-5/SOT-23-5 junction-to-ambient θJA 250 °C/W 3
Package Thermal Resistance, TSOT-23-5/SOT-23-5 junction-to-case θJC 25 °C/W 3

CAD (KiCad official)

  • Symbol: RT9193-30GB
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: rt9193-30gb-etched.step / rt9193-30gb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt9193-30gb.step / rt9193-30gb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (14 pp, sha256 f6d2d8e81d3754fc, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF