main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rt8532gqw: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
rt8532gqw-hero.glb rt8532gqw: hero from the plain model · Ray
rt8532gqw-hero.overlay.json rt8532gqw: hero from the plain model · Ray
rt8532gqw.glb Publish 0.1.0 · Ray
rt8532gqw.kicad_mod Publish 0.1.0 · Ray
rt8532gqw.kicad_sym Publish 0.1.0 · Ray
rt8532gqw.lbr Publish 0.1.0 · Ray
rt8532gqw.step Publish 0.1.0 · Ray

RT8532GQW

Richtek Tech · LED Drivers · WQFN-20-EP(3x3)

RT8532GQW from Richtek Tech, in a WQFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Chip enable, active high, with an internal 400k pull-low resistor; input high is 1.3V to 24V and low is up to 0.5V.
2 FREQ passive Boost switching frequency setting; connect a resistor between this pin and AGND (22k gives 1MHz, 51k gives 0.5MHz typ).
3 ISET passive LED current setting; a resistor RISET from ISET to ground sets ILED = 240/RISET (kΩ) mA.
4 MIX input Dimming mode selection with internal 400k pull-up to VDC; floating or high gives 25% mixed mode dimming, low gives direct PWM mode dimming.
5 AGND power_in Analog ground of the LED driver.
6 LED6 passive Current sink for LED string 6; leave unconnected or short to GND if not used.
7 LED5 passive Current sink for LED string 5; leave unconnected or short to GND if not used.
8 LED4 passive Current sink for LED string 4; leave unconnected or short to GND if not used.
9 LED3 passive Current sink for LED string 3; leave unconnected or short to GND if not used.
10 LED2 passive Current sink for LED string 2; leave unconnected or short to GND if not used.
11 LED1 passive Current sink for LED string 1; leave unconnected or short to GND if not used.
12 OVP input Over voltage protection sense input with a detecting threshold of 1.2V (typ.).
13 PGND power_in Power ground of the boost converter (pins 13 and 14).
14 PGND power_in Power ground of the boost converter (pins 13 and 14).
15 LX passive Switching pin of the boost converter (pins 15 and 16); internal 200mΩ, 43V power switch with 2.5A typ. current limit.
16 LX passive Switching pin of the boost converter (pins 15 and 16); internal 200mΩ, 43V power switch with 2.5A typ. current limit.
17 PWM input PWM dimming control input; high is 1.3V to 24V, low up to 0.5V, dimming frequency 100Hz to 20kHz.
18 VDC power_out Internal regulator voltage (3.6V to 4V, 3.8V typ.); connect a capacitor from this pin to ground.
19 VIN power_in Power supply input, 2.5V to 24V operating range.
20 COMP passive Compensation node of the boost converter; connect a compensation network for stability.
21 GND power_in Exposed pad ground; must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WQFN-20-EP(3x3)
Category Nixie Tube Driver/LED Driver
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Input Voltage VIN 2.5 24 V 4
Junction Temperature Range TJ -40 125 °C 4
Ambient Temperature Range TA -40 85 °C 4
Supply Input Voltage to GND VIN -0.3 26.5 V 4
EN, PWM, ISET, COMP, MIX, FREQ to GND -0.3 26.5 V 4
LX, OVP, LED1 to LED6 to GND -0.3 48 V 4
LX to GND -0.3 48 V 4
LX to GND transient -1 48 V < 500ns 4
VDC to GND -0.3 7 V 4
Power Dissipation PD 1.471 W WQFN-20L 3x3, TA = 25°C 4
Junction Temperature TJ 150 °C 4
Storage Temperature Range -65 150 °C 4
Lead Temperature 260 °C Soldering, 10 sec. 4
ESD HBM 2 kV 4
ESD MM 200 V 4
Thermal Resistance Junction-to-Ambient θJA 68 °C/W WQFN-20L 3x3 4
Thermal Resistance Junction-to-Case θJC 7.5 °C/W WQFN-20L 3x3 4
VIN Shutdown Current ISHDN 10 A VIN = 4.5V, EN = 0V 4
PWM Dimming Frequency fPWM 0.1 20 kHz 4
EN, PWM Input High Voltage VIH 1.3 24 V VIN = 2.5V to 24V 4
EN, PWM Input Low Voltage VIL 0.5 V VIN = 2.5V to 24V 4
Switching Frequency fSW 0.8 1 1.2 MHz RFSW = 22k 4
Switching Frequency fSW 0.4 0.5 0.6 MHz RFSW = 51k 4
LX On Resistance (N-MOSFET) RLX 0.18 0.2 0.22 Ω VIN > 4.5V 4
Minimum On-Time tON(MIN) 40 60 80 ns FSW = 1MHz 5
Maximum Duty DMAX 90 93 96 % FSW = 1MHz 5
LX Current Limit ILIM 2.2 2.5 2.8 A 5
Regulated VLEDx VLEDx 0.5 0.6 0.7 V Highest LED string, ILED = 20mA 5
LDO Output Voltage Range VDC 3.6 3.8 4 V 5
Maximum LED Current IFB(MAX) 5 50 mA MODE = PWM Mode 5
Maximum LED Current IFB(MAX) 8 50 mA MODE = Mixed Mode 5
LED Current Accuracy ILEDA 19.4 20 20.6 mA 2V > VLEDx > 0.5V, RISET = 12k 5
LED Current Matching ILEDM 2 % 2V > VLEDx > 0.5V, RISET = 12k 5
ISET Pin Voltage VISET 0.76 1 1.24 V 5
OVP Threshold VOVP 1.16 1.2 1.24 V 5
VIN Quiescent Current IVIN 3 mA PWM = COMP = 0V, not switching 4
VIN Quiescent Current (switching) IVIN_SW 4 mA PWM = COMP = 2V, switching 4
VIN UVLO Threshold rising VUVLO 2.3 V VIN rising 4
VIN UVLO Threshold falling VUVLO 2.1 V VIN falling 4
OVP UVLO Threshold VOVPF 50 mV 5
Thermal Shutdown Temperature TSD 150 C 5
OTP Hysteresis TOTP_Hys 30 C 5
LED Pin Under Voltage Threshold VLSD 0.1 V Un-Connection 5

CAD (KiCad official)

  • Symbol: RT8532GQW
  • Footprint: Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm
  • 3D model: WQFN-20-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: rt8532gqw-etched.step / rt8532gqw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt8532gqw.step / rt8532gqw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (14 pp, sha256 a756183a9ce08327, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF