main
Ray
Publish 0.1.0
b7add1a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269
{
"slug": "rt8480gs",
"version": "0.1.0",
"type": "component",
"description": "Richtek Tech LED Drivers, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"display modules - led drivers - display drivers",
"rt8480gs",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rt8480gs.kicad_sym",
"rt8480gs.kicad_mod",
"rt8480gs.glb",
"rt8480gs.step",
"rt8480gs.lbr",
"docs/hero.png",
"docs/rt8480gs-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"rt8480gs-hero.glb",
"rt8480gs-hero.overlay.json"
],
"component": {
"mpn": "RT8480GS",
"manufacturer": "Richtek Tech",
"package": "SOP-16",
"pin_count": 16,
"category": "Display Modules / LED Drivers / Display Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8bf4af161c78941d919bbf6ec29c0607.pdf",
"parts": {
"symbol": "rt8480gs.kicad_sym",
"footprint": "rt8480gs.kicad_mod",
"model_3d": "rt8480gs-hero.glb",
"model_3d_step": "rt8480gs.step",
"lbr": "rt8480gs.lbr",
"model_3d_plain": "rt8480gs.glb"
},
"distributor_links": {
"lcsc": "C425780",
"digikey": "RT8480GS-ND"
},
"distributor_check": {
"checked_at": "2026-10-31T18:36:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "RT8480GS-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "GBIAS",
"type": "power_out",
"description": "Internal gate driver bias pin that requires a good bypass capacitor (1µF, 10V rated low ESR typical); about 8.2V at 20mA."
},
{
"number": "2",
"name": "GATE",
"type": "output",
"description": "External MOSFET switch gate driver output pin, with 7.5V typical high level at 100µA and 15ns rise/fall into 1nF."
},
{
"number": "3",
"name": "PWMOUT",
"type": "output",
"description": "Output pin for the PWM dimming MOSFET driver, with 7.5V typical high level at 1mA."
},
{
"number": "4",
"name": "ISW",
"type": "input",
"description": "External MOSFET switch current sense pin, connected to the sense resistor between the external N-MOSFET and ground, with 90mV typical current limit threshold."
},
{
"number": "5",
"name": "PWMDIM",
"type": "input",
"description": "Control input for the PWM dimming MOSFET driver, with logic-high of at least 2V and logic-low of at most 0.5V."
},
{
"number": "6",
"name": "ISP",
"type": "input",
"description": "LED current sense amplifier positive input."
},
{
"number": "7",
"name": "ISN",
"type": "input",
"description": "LED current sense amplifier negative input, with a 190mV voltage threshold between ISP and ISN."
},
{
"number": "8",
"name": "VC",
"type": "passive",
"description": "PWM control loop compensation pin, typically with 1.8kΩ in series with 10nF to GND."
},
{
"number": "9",
"name": "ACTL",
"type": "input",
"description": "Analog dimming control pin with an effective programming voltage range between 0.3V and 1.2V."
},
{
"number": "10",
"name": "DCTL",
"type": "input",
"description": "PWM dimming control pin which, with a 0.47µF filter capacitor on ACTL, converts the PWM duty to analog dimming where VACTL = 1.2V x duty cycle."
},
{
"number": "11",
"name": "SS",
"type": "passive",
"description": "Soft-start pin that requires a capacitor of at least 100nF for proper soft-start, charged by 6µA."
},
{
"number": "12",
"name": "EN",
"type": "input",
"description": "Active-high chip enable; the chip is in shutdown when this pin voltage is low (at most 0.5V), with 20V absolute maximum."
},
{
"number": "13",
"name": "OVP",
"type": "input",
"description": "Over voltage protection pin; the PWM converter turns off when the pin voltage goes higher than 1.2V (1.18V typical threshold)."
},
{
"number": "14",
"name": "RSET",
"type": "passive",
"description": "Switching frequency set pin with a resistor to GND; 30k sets fSW = 380kHz, and the pin must not be left open."
},
{
"number": "15",
"name": "VCC",
"type": "power_in",
"description": "Power supply pin of the chip, 6V to 36V operating range (38V absolute maximum), requiring a low ESR bypass capacitor."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Ground."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet says the ACTL range is 0.3V to 1.2V on the pin table but 0.25V to 1.25V elsewhere. It ; VC, SS and RSET are classed as passive because they connect only to external RC components. This is ; GBIAS is classed as power_out because it is an internal regulator output that needs a bypass capacit"
],
"pages_sent": 17,
"cost_usd": 0.1573,
"at": "2026-10-31T18:36:38"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/8bf4af161c78941d919bbf6ec29c0607.pdf",
"pages": 17,
"sha256": "c08345e829691669",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rt8480gs.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP-16",
"source_page": 17,
"D": {
"nom_mm": 9.906,
"range_mm": [
9.804,
10.008
]
},
"E1": {
"nom_mm": 3.899,
"range_mm": [
3.81,
3.988
]
},
"E": {
"nom_mm": 5.995,
"range_mm": [
5.791,
6.198
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
1.194,
1.346
]
},
"A": {
"nom_mm": 1.55,
"range_mm": [
1.346,
1.753
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "rt8480gs.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}