main
History Download
Ray rt8462zqw: remove the false 'cross-checked by two models' claim; the pins came from one model read (a second read is pe… 4fd9d90

RT8462ZQW

Richtek Tech · LED Drivers · WQFN-16(3x3)

RT8462ZQW from Richtek Tech, in a WQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RSET passive Switching frequency set pin; connect a resistor from RSET to GND, where RRSET = 30k sets fSW = 370kHz.
2 ISW input External MOSFET switch current sense; the sense resistor connects between the external N-MOSFET source and ground, with the ISW limit threshold of 80 to 145mV.
3 ISP input LED current sense amplifier positive input with common mode voltage up to 60V.
4 ISN input LED current sense amplifier negative input; the threshold between ISP and ISN is 190mV with common mode voltage up to 60V.
5 VC passive PWM control loop compensation pin; a series resistor and capacitor to GND (typically 10k and 3.3nF) set the loop response.
6 ACTL input Analog dimming control; the effective programming voltage range is 0.2V to 1.2V.
7 DCTL input PWM dimming input; with a filtering capacitor on ACTL, the PWM signal on this pin is averaged into an analog dimming signal on ACTL.
8 SS passive Soft-start pin; a capacitor of at least 10nF is required for proper soft-start.
9 EN input Chip enable, active high; when the pin voltage is low the chip is in shutdown mode.
10 OVP input Over voltage protection; the PWM converter turns off when the pin voltage goes higher than 1.18V.
11 VCC power_in Power supply pin of the chip with a recommended operating range of 6V to 36V; a low ESR bypass capacitor is required.
12 GND power_in Ground; connect to a large PCB ground plane for maximum power dissipation and noise reduction.
13 GBIAS power_out Internal gate driver bias output; a good bypass capacitor is required.
14 GATE output External MOSFET switch gate driver output.
15 NC unconnected No internal connection.
16 NC unconnected No internal connection.
17 GND power_in Exposed pad; must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WQFN-16(3x3)
Category Nixie Tube Driver/LED Driver
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current IVCC 6 7.2 mA VVC ≥ 0.4V (Switching off) 5
EN Threshold Voltage Logic-High VIH 2 V 5
EN Threshold Voltage Logic-Low VIL 0.5 V 5
EN Input Current IEN 1.2 μA VEN ≤ 3V 5
Current Sense Amplifier Input Threshold VISP−VISN 182 190 198 mV VACTL ≥ 1.25V, 12V ≤ common mode ≤ 60V 5
Supply Input Voltage Range VCC 6 36 V 5
Junction Temperature Range TJ -40 125 °C 5
Supply Input Voltage VCC -0.3 38 V 5
GBIAS, GATE Voltage VGBIAS, VGATE -0.3 10 V 5
ISW Voltage VISW -0.3 1 V 5
ISP, ISN Voltage VISP, VISN -0.3 66 V 5
DCTL, ACTL, OVP Voltage VDCTL, VACTL, VOVP -0.3 8 V Note 2 5
EN Voltage VEN -0.3 20 V 5
Power Dissipation WQFN-16L 3x3 PD 1.471 W TA = 25°C 5
Package Thermal Resistance WQFN-16L 3x3 Junction to Ambient θJA 68 °C/W 5
Package Thermal Resistance WQFN-16L 3x3 Junction to Case θJC 7.5 °C/W 5
Junction Temperature TJ 150 °C 5
Lead Temperature 260 °C Soldering, 10 sec. 5
Storage Temperature Range TSTG -65 150 °C 5
ESD Susceptibility HBM 2 kV Human Body Model 5
ESD Susceptibility MM 200 V Machine Model 5
DCTL Input Current IDCTL 0.5 μA 0.3V ≤ VDCTL ≤ 5V 6
DCTL Threshold Voltage High VDCTL_H 2 V 6
DCTL Threshold Voltage Low VDCTL_L 0.3 V 6
Switching Frequency fSW 280 370 450 kHz RRSET = 30k 6
GBIAS Voltage VGBIAS 7.8 8.5 9.2 V IGBIAS = 20mA 6
GATE Voltage High VGATE_H 6 7.2 7.8 V IGATE = 50mA 6
GATE Voltage High VGATE_H 7.5 7.8 7.9 V IGATE = 100μA 6
GATE Voltage Low VGATE_L 0.5 1 V IGATE = 10mA 6
GATE Voltage Low VGATE_L 0.1 0.9 V IGATE = 100μA 6
GATE Drive Rise and Fall Time 20 100 ns 1nF Load at GATE 6
PWM Switch Current Limit Threshold ISW_LIM 80 110 145 mV 6
OVP Input Current IOVP 0.1 μA 0.7V ≤ VOVP ≤ 1.5V 6

CAD (KiCad official)

  • Symbol: RT8462ZQW
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: rt8462zqw-etched.step / rt8462zqw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt8462zqw.step / rt8462zqw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (16 pp, sha256 7d8f2d7c236db662, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF