main
Ray
Publish 0.1.0
372c255
RT8299ZQW
Richtek Tech · DC-DC Converters · WDFN-10(3x3)
RT8299ZQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input connected to the converter output through an internal or external resistive divider, regulating the output to the 0.8V typical feedback reference (VFB 788 to 812 mV). |
| 2 | PGOOD | output | Power good output, an open-drain pin that indicates output regulation relative to VFB (90% rising and 70% falling thresholds). |
| 3 | EN | input | Enable input: logic high (2V to 5.5V) enables the converter, and logic low (below 0.4V) forces shutdown, reducing supply current to less than 3 µA. |
| 4 | VCC | power_out | Output of the internal 5V linear regulator powered by VIN, which must be decoupled with a 1 µF ceramic capacitor to ground for normal operation. |
| 5 | BOOT | power_out | Bootstrap supply for the high-side gate driver, which requires a 0.1 µF or greater ceramic capacitor connected from BOOT to SW. |
| 6 | VIN | power_in | Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended. |
| 7 | VIN | power_in | Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended. |
| 8 | SW | output | Switch node that connects to the external LC output filter. |
| 9 | SW | output | Switch node that connects to the external LC output filter. |
| 10 | GND | power_in | Ground pin, connected together with the exposed pad to the system ground plane. |
| 11 | GND | power_in | Exposed thermal pad, which must be soldered to a large PCB and connected to GND for maximum power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | WDFN-10(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown Current | ISHDN | 3 | μA | VEN = 0V | 4 | ||
| Switch Leakage | 0 | 10 | μA | VEN = 0V, VSW = 0V or 12V | 4 | ||
| Oscillator Frequency | fOSC | 425 | 500 | 575 | kHz | VFB = 0.75V | 4 |
| Feedback Voltage | VFB | 788 | 800 | 812 | mV | 4.5V ≤ VIN ≤ 24V | 4 |
| EN Input Threshold Voltage Logic-High | VIH | 2 | 5.5 | V | 4 | ||
| EN Input Threshold Voltage Logic-Low | VIL | 0.4 | V | 4 | |||
| VCC Load Regulation | 4 | 4 | % | ICC = 5mA | 5 | ||
| Supply Input Voltage | VIN | -0.3 | 26 | V | 4 | ||
| Switching Voltage SW | SW | -0.6 | V | 4 | |||
| Switching Voltage SW (transient) | SW | -5 | 30 | V | < 20ns | 4 | |
| All Other Pins Voltage | -0.3 | 6 | V | 4 | |||
| Power Dissipation | PD | 1.429 | W | TA = 25°C, WDFN-10L 3x3 | 4 | ||
| Junction Temperature | 150 | °C | 4 | ||||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature (Soldering) | 260 | °C | 10 sec. | 4 | |||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 4 | |||
| ESD Susceptibility MM | 200 | V | Machine Model | 4 | |||
| Supply Voltage VIN | VIN | 3 | 24 | V | 4 | ||
| Junction Temperature Range | -40 | 125 | °C | 4 | |||
| Ambient Temperature Range | 85 | °C | 4 | ||||
| Junction-to-Ambient Thermal Resistance WDFN-10L 3x3 | θJA | 70 | °C/W | 4 | |||
| Junction-to-Case Thermal Resistance WDFN-10L 3x3 | θJC | 8.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
RT8299ZQW - Footprint:
Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm - 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
rt8299zqw-etched.step/rt8299zqw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt8299zqw.step/rt8299zqw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (15 pp, sha256
4549f9a59c6cff56, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RT8299ZQW
**Richtek Tech** · DC-DC Converters · WDFN-10(3x3)
RT8299ZQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input connected to the converter output through an internal or external resistive divider, regulating the output to the 0.8V typical feedback reference (VFB 788 to 812 mV). |
| 2 | PGOOD | output | Power good output, an open-drain pin that indicates output regulation relative to VFB (90% rising and 70% falling thresholds). |
| 3 | EN | input | Enable input: logic high (2V to 5.5V) enables the converter, and logic low (below 0.4V) forces shutdown, reducing supply current to less than 3 µA. |
| 4 | VCC | power_out | Output of the internal 5V linear regulator powered by VIN, which must be decoupled with a 1 µF ceramic capacitor to ground for normal operation. |
| 5 | BOOT | power_out | Bootstrap supply for the high-side gate driver, which requires a 0.1 µF or greater ceramic capacitor connected from BOOT to SW. |
| 6 | VIN | power_in | Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended. |
| 7 | VIN | power_in | Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended. |
| 8 | SW | output | Switch node that connects to the external LC output filter. |
| 9 | SW | output | Switch node that connects to the external LC output filter. |
| 10 | GND | power_in | Ground pin, connected together with the exposed pad to the system ground plane. |
| 11 | GND | power_in | Exposed thermal pad, which must be soldered to a large PCB and connected to GND for maximum power dissipation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | WDFN-10(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown Current | ISHDN | | | 3 | μA | VEN = 0V | 4 |
| Switch Leakage | | | 0 | 10 | μA | VEN = 0V, VSW = 0V or 12V | 4 |
| Oscillator Frequency | fOSC | 425 | 500 | 575 | kHz | VFB = 0.75V | 4 |
| Feedback Voltage | VFB | 788 | 800 | 812 | mV | 4.5V ≤ VIN ≤ 24V | 4 |
| EN Input Threshold Voltage Logic-High | VIH | 2 | | 5.5 | V | | 4 |
| EN Input Threshold Voltage Logic-Low | VIL | | | 0.4 | V | | 4 |
| VCC Load Regulation | | 4 | | 4 | % | ICC = 5mA | 5 |
| Supply Input Voltage | VIN | -0.3 | | 26 | V | | 4 |
| Switching Voltage SW | SW | -0.6 | | | V | | 4 |
| Switching Voltage SW (transient) | SW | -5 | | 30 | V | < 20ns | 4 |
| All Other Pins Voltage | | -0.3 | | 6 | V | | 4 |
| Power Dissipation | PD | | | 1.429 | W | TA = 25°C, WDFN-10L 3x3 | 4 |
| Junction Temperature | | | | 150 | °C | | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | | 4 |
| Lead Temperature (Soldering) | | | | 260 | °C | 10 sec. | 4 |
| ESD Susceptibility HBM | | | | 2 | kV | Human Body Model | 4 |
| ESD Susceptibility MM | | | | 200 | V | Machine Model | 4 |
| Supply Voltage VIN | VIN | 3 | | 24 | V | | 4 |
| Junction Temperature Range | | -40 | | 125 | °C | | 4 |
| Ambient Temperature Range | | | | 85 | °C | | 4 |
| Junction-to-Ambient Thermal Resistance WDFN-10L 3x3 | θJA | | 70 | | °C/W | | 4 |
| Junction-to-Case Thermal Resistance WDFN-10L 3x3 | θJC | | 8.2 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `RT8299ZQW`
- Footprint: `Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm`
- 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `rt8299zqw-etched.step` / `rt8299zqw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rt8299zqw.step` / `rt8299zqw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600708159967547392) (15 pp, sha256 `4549f9a59c6cff56`, retrieved 2026-11-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rt8299zqw-datasheet.pdf)