main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rt8299zqw: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
rt8299zqw-hero.glb rt8299zqw: hero from the plain model · Ray
rt8299zqw-hero.overlay.json rt8299zqw: hero from the plain model · Ray
rt8299zqw.glb Publish 0.1.0 · Ray
rt8299zqw.kicad_mod Publish 0.1.0 · Ray
rt8299zqw.kicad_sym Publish 0.1.0 · Ray
rt8299zqw.lbr Publish 0.1.0 · Ray
rt8299zqw.step Publish 0.1.0 · Ray

RT8299ZQW

Richtek Tech · DC-DC Converters · WDFN-10(3x3)

RT8299ZQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input connected to the converter output through an internal or external resistive divider, regulating the output to the 0.8V typical feedback reference (VFB 788 to 812 mV).
2 PGOOD output Power good output, an open-drain pin that indicates output regulation relative to VFB (90% rising and 70% falling thresholds).
3 EN input Enable input: logic high (2V to 5.5V) enables the converter, and logic low (below 0.4V) forces shutdown, reducing supply current to less than 3 µA.
4 VCC power_out Output of the internal 5V linear regulator powered by VIN, which must be decoupled with a 1 µF ceramic capacitor to ground for normal operation.
5 BOOT power_out Bootstrap supply for the high-side gate driver, which requires a 0.1 µF or greater ceramic capacitor connected from BOOT to SW.
6 VIN power_in Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended.
7 VIN power_in Power input with an operating range of 3V to 24V after soft-start is finished, decoupled to GND with 10 µF x 2 and 0.1 µF capacitors as recommended.
8 SW output Switch node that connects to the external LC output filter.
9 SW output Switch node that connects to the external LC output filter.
10 GND power_in Ground pin, connected together with the exposed pad to the system ground plane.
11 GND power_in Exposed thermal pad, which must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WDFN-10(3x3)
Category Power Management (PMIC)
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Shutdown Current ISHDN 3 μA VEN = 0V 4
Switch Leakage 0 10 μA VEN = 0V, VSW = 0V or 12V 4
Oscillator Frequency fOSC 425 500 575 kHz VFB = 0.75V 4
Feedback Voltage VFB 788 800 812 mV 4.5V ≤ VIN ≤ 24V 4
EN Input Threshold Voltage Logic-High VIH 2 5.5 V 4
EN Input Threshold Voltage Logic-Low VIL 0.4 V 4
VCC Load Regulation 4 4 % ICC = 5mA 5
Supply Input Voltage VIN -0.3 26 V 4
Switching Voltage SW SW -0.6 V 4
Switching Voltage SW (transient) SW -5 30 V < 20ns 4
All Other Pins Voltage -0.3 6 V 4
Power Dissipation PD 1.429 W TA = 25°C, WDFN-10L 3x3 4
Junction Temperature 150 °C 4
Storage Temperature Range -65 150 °C 4
Lead Temperature (Soldering) 260 °C 10 sec. 4
ESD Susceptibility HBM 2 kV Human Body Model 4
ESD Susceptibility MM 200 V Machine Model 4
Supply Voltage VIN VIN 3 24 V 4
Junction Temperature Range -40 125 °C 4
Ambient Temperature Range 85 °C 4
Junction-to-Ambient Thermal Resistance WDFN-10L 3x3 θJA 70 °C/W 4
Junction-to-Case Thermal Resistance WDFN-10L 3x3 θJC 8.2 °C/W 4

CAD (KiCad official)

  • Symbol: RT8299ZQW
  • Footprint: Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm
  • 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: rt8299zqw-etched.step / rt8299zqw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt8299zqw.step / rt8299zqw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (15 pp, sha256 4549f9a59c6cff56, retrieved 2026-11-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF