main
Ray
rt8272gsp: specified limits as data (metadata.characteristics, 24 rows from the datasheet)
be0a898
RT8272GSP
Richtek Tech · DC-DC Converters · SOIC-8-EP
RT8272GSP from Richtek Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_in | High-side gate drive boost input. Supplies drive for the high-side N-MOSFET. Connect a 10nF or greater bootstrap capacitor from SW to BOOT to power the high-side switch. Absolute max VBOOT = VSW - 0.3V to VSW + 6V. |
| 2 | VIN | power_in | Power input. Supplies power to the IC and step-down converter switches. Operating range 4.75V to 24V (abs max 26V). Bypass VIN to GND with a suitable large capacitor to eliminate input noise. |
| 3 | SW | output | Power switching output. Switching node connecting to the internal high-side and low-side MOSFETs. Connect external LC filter from SW to the load; also connect bootstrap capacitor from SW to BOOT. Range -0.3V to VIN+0.3V. |
| 4 | GND | power_in | Ground. Pin 4 and the exposed pad (pin 9) are both GND. The exposed pad must be soldered to a large PCB plane and connected to GND for maximum power dissipation. |
| 5 | FB | input | Feedback input. Senses the output voltage via a resistor divider to regulate the output. Internal feedback reference voltage is 0.92V typical (0.902V to 0.938V). |
| 6 | COMP | output | Compensation node. Output of the internal error amplifier (Gm = 680µA/V typ). Connect a series RC network from COMP to GND to compensate the regulation control loop; an additional capacitor from COMP to GND may be required. |
| 7 | EN | input | Enable input. Digital input that turns the regulator on or off. Drive EN higher than 1.4V to enable, lower than 0.4V to disable. If left open, an internal 1µA pull-up will pull EN high. Operating range 0V to 5.5V. |
| 8 | SS | input | Soft-start control input. An internal 10µA current source charges an external capacitor from SS to GND to set the soft-start period. A 0.1µF capacitor produces approximately 10ms of soft-start. |
| 9 | GND | power_in | Exposed thermal pad (bottom). Electrically GND. Must be soldered to a large PCB copper area and connected to GND for maximum power dissipation (θJA = 75°C/W). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOIC-8-EP |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
RT8272GSP
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VIN | VIN | -0.3 | 26 | V | 3 | ||
| Switching Voltage, SW | VSW | -0.3 | V | Max printed as VIN + 0.3V | 3 | ||
| BOOT Voltage | VBOOT | -0.3 | 6 | V | Relative to VSW: (VSW − 0.3V) to (VSW + 6V) | 3 | |
| All Other Pins Voltage | -0.3 | 6 | V | 3 | |||
| Power Dissipation, PD | PD | 1.333 | W | TA = 25°C, SOP-8 (Exposed Pad) | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 3 | |||
| ESD Susceptibility MM | 200 | V | Machine Model | 3 | |||
| Supply Voltage, VIN | VIN | 4.75 | 24 | V | 3 | ||
| Enable Voltage, VEN | VEN | 0 | 5.5 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Package Thermal Resistance, junction to ambient | θJA | 75 | °C/W | SOP-8 (Exposed Pad), JEDEC 51-7 four-layer board | 3 | ||
| Feedback Reference Voltage | VFB | 0.902 | 0.92 | 0.938 | V | 4.75V ≤ VIN ≤ 24V | 4 |
| High Side Switch-On Resistance | RDS(ON)1 | 0.1 | 0.16 | Ω | 4 | ||
| Switch Leakage | 10 | μA | VEN = 0V, VSW = 0V | 4 | |||
| Error Amplifier Transconductance | Gm | 500 | 680 | 900 | μA/V | ΔIC = ±10μA | 4 |
| Under Voltage Lockout Threshold (Rising) | 3.8 | 4.2 | 4.5 | V | Rising | 4 | |
| En input Low Voltage | 0.4 | V | 4 | ||||
| En input High Voltage | 1.4 | V | 4 | ||||
| Enable Pull Up Current | 0.15 | 1 | 2.65 | μA | 4 | ||
| Quiescent Current | IQ | 0.8 | 1 | mA | VEN = 2V, VFB = 1V | 4 |
CAD (KiCad official)
- Symbol:
RT8272GSP - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
rt8272gsp-etched.step/rt8272gsp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt8272gsp.step/rt8272gsp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (12 pp, sha256
75e97a3c989cd759, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RT8272GSP
**Richtek Tech** · DC-DC Converters · SOIC-8-EP
RT8272GSP from Richtek Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_in | High-side gate drive boost input. Supplies drive for the high-side N-MOSFET. Connect a 10nF or greater bootstrap capacitor from SW to BOOT to power the high-side switch. Absolute max VBOOT = VSW - 0.3V to VSW + 6V. |
| 2 | VIN | power_in | Power input. Supplies power to the IC and step-down converter switches. Operating range 4.75V to 24V (abs max 26V). Bypass VIN to GND with a suitable large capacitor to eliminate input noise. |
| 3 | SW | output | Power switching output. Switching node connecting to the internal high-side and low-side MOSFETs. Connect external LC filter from SW to the load; also connect bootstrap capacitor from SW to BOOT. Range -0.3V to VIN+0.3V. |
| 4 | GND | power_in | Ground. Pin 4 and the exposed pad (pin 9) are both GND. The exposed pad must be soldered to a large PCB plane and connected to GND for maximum power dissipation. |
| 5 | FB | input | Feedback input. Senses the output voltage via a resistor divider to regulate the output. Internal feedback reference voltage is 0.92V typical (0.902V to 0.938V). |
| 6 | COMP | output | Compensation node. Output of the internal error amplifier (Gm = 680µA/V typ). Connect a series RC network from COMP to GND to compensate the regulation control loop; an additional capacitor from COMP to GND may be required. |
| 7 | EN | input | Enable input. Digital input that turns the regulator on or off. Drive EN higher than 1.4V to enable, lower than 0.4V to disable. If left open, an internal 1µA pull-up will pull EN high. Operating range 0V to 5.5V. |
| 8 | SS | input | Soft-start control input. An internal 10µA current source charges an external capacitor from SS to GND to set the soft-start period. A 0.1µF capacitor produces approximately 10ms of soft-start. |
| 9 | GND | power_in | Exposed thermal pad (bottom). Electrically GND. Must be soldered to a large PCB copper area and connected to GND for maximum power dissipation (θJA = 75°C/W). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOIC-8-EP |
| Category | PMIC |
| Pins | 9 |
## Ordering variants
Same part, different packaging or reel option.
- `RT8272GSP`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VIN | VIN | -0.3 | | 26 | V | | 3 |
| Switching Voltage, SW | VSW | -0.3 | | | V | Max printed as VIN + 0.3V | 3 |
| BOOT Voltage | VBOOT | -0.3 | | 6 | V | Relative to VSW: (VSW − 0.3V) to (VSW + 6V) | 3 |
| All Other Pins Voltage | | -0.3 | | 6 | V | | 3 |
| Power Dissipation, PD | PD | | | 1.333 | W | TA = 25°C, SOP-8 (Exposed Pad) | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Lead Temperature (Soldering) | | | | 260 | °C | Soldering, 10 sec | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| ESD Susceptibility HBM | | | | 2 | kV | Human Body Model | 3 |
| ESD Susceptibility MM | | | | 200 | V | Machine Model | 3 |
| Supply Voltage, VIN | VIN | 4.75 | | 24 | V | | 3 |
| Enable Voltage, VEN | VEN | 0 | | 5.5 | V | | 3 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| Ambient Temperature Range | TA | -40 | | 85 | °C | | 3 |
| Package Thermal Resistance, junction to ambient | θJA | | 75 | | °C/W | SOP-8 (Exposed Pad), JEDEC 51-7 four-layer board | 3 |
| Feedback Reference Voltage | VFB | 0.902 | 0.92 | 0.938 | V | 4.75V ≤ VIN ≤ 24V | 4 |
| High Side Switch-On Resistance | RDS(ON)1 | | 0.1 | 0.16 | Ω | | 4 |
| Switch Leakage | | | | 10 | μA | VEN = 0V, VSW = 0V | 4 |
| Error Amplifier Transconductance | Gm | 500 | 680 | 900 | μA/V | ΔIC = ±10μA | 4 |
| Under Voltage Lockout Threshold (Rising) | | 3.8 | 4.2 | 4.5 | V | Rising | 4 |
| En input Low Voltage | | | | 0.4 | V | | 4 |
| En input High Voltage | | 1.4 | | | V | | 4 |
| Enable Pull Up Current | | 0.15 | 1 | 2.65 | μA | | 4 |
| Quiescent Current | IQ | | 0.8 | 1 | mA | VEN = 2V, VFB = 1V | 4 |
## CAD (KiCad official)
- Symbol: `RT8272GSP`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `rt8272gsp-etched.step` / `rt8272gsp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rt8272gsp.step` / `rt8272gsp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](docs/rt8272gsp-datasheet.pdf) (12 pp, sha256 `75e97a3c989cd759`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rt8272gsp-datasheet.pdf)