Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT8272GSP

Richtek Tech · DC-DC Converters · SOIC-8-EP

RT8272GSP from Richtek Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_in High-side gate drive boost input. Supplies drive for the high-side N-MOSFET. Connect a 10nF or greater bootstrap capacitor from SW to BOOT to power the high-side switch. Absolute max VBOOT = VSW - 0.3V to VSW + 6V.
2 VIN power_in Power input. Supplies power to the IC and step-down converter switches. Operating range 4.75V to 24V (abs max 26V). Bypass VIN to GND with a suitable large capacitor to eliminate input noise.
3 SW output Power switching output. Switching node connecting to the internal high-side and low-side MOSFETs. Connect external LC filter from SW to the load; also connect bootstrap capacitor from SW to BOOT. Range -0.3V to VIN+0.3V.
4 GND power_in Ground. Pin 4 and the exposed pad (pin 9) are both GND. The exposed pad must be soldered to a large PCB plane and connected to GND for maximum power dissipation.
5 FB input Feedback input. Senses the output voltage via a resistor divider to regulate the output. Internal feedback reference voltage is 0.92V typical (0.902V to 0.938V).
6 COMP output Compensation node. Output of the internal error amplifier (Gm = 680µA/V typ). Connect a series RC network from COMP to GND to compensate the regulation control loop; an additional capacitor from COMP to GND may be required.
7 EN input Enable input. Digital input that turns the regulator on or off. Drive EN higher than 1.4V to enable, lower than 0.4V to disable. If left open, an internal 1µA pull-up will pull EN high. Operating range 0V to 5.5V.
8 SS input Soft-start control input. An internal 10µA current source charges an external capacitor from SS to GND to set the soft-start period. A 0.1µF capacitor produces approximately 10ms of soft-start.
9 GND power_in Exposed thermal pad (bottom). Electrically GND. Must be soldered to a large PCB copper area and connected to GND for maximum power dissipation (θJA = 75°C/W).

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOIC-8-EP
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • RT8272GSP

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage, VIN VIN -0.3 26 V 3
Switching Voltage, SW VSW -0.3 V Max printed as VIN + 0.3V 3
BOOT Voltage VBOOT -0.3 6 V Relative to VSW: (VSW − 0.3V) to (VSW + 6V) 3
All Other Pins Voltage -0.3 6 V 3
Power Dissipation, PD PD 1.333 W TA = 25°C, SOP-8 (Exposed Pad) 3
Junction Temperature TJ 150 °C 3
Lead Temperature (Soldering) 260 °C Soldering, 10 sec 3
Storage Temperature Range TSTG -65 150 °C 3
ESD Susceptibility HBM 2 kV Human Body Model 3
ESD Susceptibility MM 200 V Machine Model 3
Supply Voltage, VIN VIN 4.75 24 V 3
Enable Voltage, VEN VEN 0 5.5 V 3
Junction Temperature Range TJ -40 125 °C 3
Ambient Temperature Range TA -40 85 °C 3
Package Thermal Resistance, junction to ambient θJA 75 °C/W SOP-8 (Exposed Pad), JEDEC 51-7 four-layer board 3
Feedback Reference Voltage VFB 0.902 0.92 0.938 V 4.75V ≤ VIN ≤ 24V 4
High Side Switch-On Resistance RDS(ON)1 0.1 0.16 Ω 4
Switch Leakage 10 μA VEN = 0V, VSW = 0V 4
Error Amplifier Transconductance Gm 500 680 900 μA/V ΔIC = ±10μA 4
Under Voltage Lockout Threshold (Rising) 3.8 4.2 4.5 V Rising 4
En input Low Voltage 0.4 V 4
En input High Voltage 1.4 V 4
Enable Pull Up Current 0.15 1 2.65 μA 4
Quiescent Current IQ 0.8 1 mA VEN = 2V, VFB = 1V 4

CAD (KiCad official)

  • Symbol: RT8272GSP
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: rt8272gsp-etched.step / rt8272gsp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt8272gsp.step / rt8272gsp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (12 pp, sha256 75e97a3c989cd759, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF