main
Ray
Publish 0.1.0
86de1e7
RT8097AHGE
Richtek Tech · DC-DC Converters · SOT-23-6
RT8097AHGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control input; logic-high (min 1.5V) enables the converter and logic-low (max 0.4V) forces shutdown. |
| 2 | GND | power_in | Power ground. |
| 3 | LX | passive | Switch node connecting to the inductor. |
| 4 | VIN | power_in | Supply voltage input; the RT8097A operates from a 2.7V to 6V input. |
| 5 | PG | output | Power good indicator, open-drain output with external pull-up resistor; pulled up when the FB voltage is within 90% (typ.), otherwise LOW. |
| 6 | FB | input | Feedback voltage input; an external resistor divider from the output to GND, tapped to the FB pin, sets the output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | 6 | V | 5 | ||
| Feedback Reference Voltage | VREF | 0.593 | 0.6 | 0.607 | V | 5 | |
| Feedback Leakage Current | IFB | 0.1 | µA | VFB = 0.6V | 5 | ||
| DC Bias Current, Active | 22 | µA | Active, VFB = 0.63V, not switching | 5 | |||
| DC Bias Current, Shutdown | 1 | µA | Shutdown | 5 | |||
| Switching Leakage Current | 1 | µA | 5 | ||||
| Switching Frequency | 0.8 | 1 | 1.2 | MHz | 5 | ||
| Valley Current Limit | ILIM | 2.2 | 3.1 | 3.9 | A | 5 | |
| UVLO Threshold, rising | VUVLO | 2.25 | 2.5 | V | VDD rising | 6 | |
| Enable Logic-High | VIH | 1.5 | V | 6 | |||
| Enable Logic-Low | VIL | 0.4 | V | 6 | |||
| Minimum Off Time | 70 | 120 | 180 | ns | 6 | ||
| Maximum Duty Cycle | DMAX | 70 | % | Note 5 | 6 | ||
| Switch On Resistance, Low | RNMOS | 70 | mΩ | ISW = 0.3A | 5 | ||
| Switch On Resistance, High | RPMOS | 100 | mΩ | ISW = 0.3A | 5 | ||
| UVLO Threshold, falling | VUVLO | 2 | V | VDD falling | 6 | ||
| Over-Temperature Threshold | 150 | °C | 6 | ||||
| PG Threshold Rising | 90 | % | Rising, relative to VOUT | 6 | |||
| PG Threshold Falling | 85 | % | Falling, relative to VOUT | 6 | |||
| PG Open-Drain Impedance | 10 | Ω | PG = low | 6 | |||
| Soft-Start Time | tSS | 1.2 | ms | 6 | |||
| Output Discharge Switch On Resistance | 1.8 | kΩ | 6 | ||||
| Supply Input Voltage | VIN | -0.3 | 6.5 | V | 5 | ||
| LX Pin Switch Voltage | -4.5 | 7.5 | V | <20ns | 5 | ||
| Power Dissipation SOT-23-6 | PD | 1.09 | W | TA = 25°C | 5 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec | 5 | |||
| Junction Temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| ESD Susceptibility HBM | 2 | kV | HBM | 5 | |||
| Supply Input Voltage | VIN | 2.7 | 6 | V | 5 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Thermal Resistance Junction to Ambient SOT-23-6 | θJA | 91.5 | °C/W | TA = 25°C, two-layer 45mm x 45mm board, 1oz copper | 5 | ||
| Thermal Resistance Junction to Case SOT-23-6 | θJC | 14 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
RT8097AHGE - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.092 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (16 pp, sha256
22804c216fd53f30, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# RT8097AHGE
**Richtek Tech** · DC-DC Converters · SOT-23-6
RT8097AHGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control input; logic-high (min 1.5V) enables the converter and logic-low (max 0.4V) forces shutdown. |
| 2 | GND | power_in | Power ground. |
| 3 | LX | passive | Switch node connecting to the inductor. |
| 4 | VIN | power_in | Supply voltage input; the RT8097A operates from a 2.7V to 6V input. |
| 5 | PG | output | Power good indicator, open-drain output with external pull-up resistor; pulled up when the FB voltage is within 90% (typ.), otherwise LOW. |
| 6 | FB | input | Feedback voltage input; an external resistor divider from the output to GND, tapped to the FB pin, sets the output voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | Power Management |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | | 6 | V | | 5 |
| Feedback Reference Voltage | VREF | 0.593 | 0.6 | 0.607 | V | | 5 |
| Feedback Leakage Current | IFB | | | 0.1 | µA | VFB = 0.6V | 5 |
| DC Bias Current, Active | | | 22 | | µA | Active, VFB = 0.63V, not switching | 5 |
| DC Bias Current, Shutdown | | | | 1 | µA | Shutdown | 5 |
| Switching Leakage Current | | | | 1 | µA | | 5 |
| Switching Frequency | | 0.8 | 1 | 1.2 | MHz | | 5 |
| Valley Current Limit | ILIM | 2.2 | 3.1 | 3.9 | A | | 5 |
| UVLO Threshold, rising | VUVLO | | 2.25 | 2.5 | V | VDD rising | 6 |
| Enable Logic-High | VIH | 1.5 | | | V | | 6 |
| Enable Logic-Low | VIL | | | 0.4 | V | | 6 |
| Minimum Off Time | | 70 | 120 | 180 | ns | | 6 |
| Maximum Duty Cycle | DMAX | 70 | | | % | Note 5 | 6 |
| Switch On Resistance, Low | RNMOS | | 70 | | mΩ | ISW = 0.3A | 5 |
| Switch On Resistance, High | RPMOS | | 100 | | mΩ | ISW = 0.3A | 5 |
| UVLO Threshold, falling | VUVLO | | 2 | | V | VDD falling | 6 |
| Over-Temperature Threshold | | | 150 | | °C | | 6 |
| PG Threshold Rising | | | 90 | | % | Rising, relative to VOUT | 6 |
| PG Threshold Falling | | | 85 | | % | Falling, relative to VOUT | 6 |
| PG Open-Drain Impedance | | | 10 | | Ω | PG = low | 6 |
| Soft-Start Time | tSS | | 1.2 | | ms | | 6 |
| Output Discharge Switch On Resistance | | | 1.8 | | kΩ | | 6 |
| Supply Input Voltage | VIN | -0.3 | | 6.5 | V | | 5 |
| LX Pin Switch Voltage | | -4.5 | | 7.5 | V | <20ns | 5 |
| Power Dissipation SOT-23-6 | PD | | | 1.09 | W | TA = 25°C | 5 |
| Lead Temperature | | | | 260 | °C | Soldering, 10 sec | 5 |
| Junction Temperature | TJ | -40 | | 150 | °C | | 5 |
| Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| ESD Susceptibility HBM | | | | 2 | kV | HBM | 5 |
| Supply Input Voltage | VIN | 2.7 | | 6 | V | | 5 |
| Ambient Temperature Range | TA | -40 | | 85 | °C | | 5 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 5 |
| Thermal Resistance Junction to Ambient SOT-23-6 | θJA | | 91.5 | | °C/W | TA = 25°C, two-layer 45mm x 45mm board, 1oz copper | 5 |
| Thermal Resistance Junction to Case SOT-23-6 | θJC | | 14 | | °C/W | | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `RT8097AHGE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.092 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](docs/rt8097ahge-datasheet.pdf) (16 pp, sha256 `22804c216fd53f30`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/rt8097ahge-datasheet.pdf)