main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rt8097ahge: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
rt8097ahge-hero.glb Publish 0.1.0 · Ray
rt8097ahge-hero.overlay.json Publish 0.1.0 · Ray
rt8097ahge.glb Publish 0.1.0 · Ray
rt8097ahge.kicad_mod Publish 0.1.0 · Ray
rt8097ahge.kicad_sym Publish 0.1.0 · Ray
rt8097ahge.lbr Publish 0.1.0 · Ray
rt8097ahge.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

RT8097AHGE

Richtek Tech · DC-DC Converters · SOT-23-6

RT8097AHGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 EN input Enable control input; logic-high (min 1.5V) enables the converter and logic-low (max 0.4V) forces shutdown.
2 GND power_in Power ground.
3 LX passive Switch node connecting to the inductor.
4 VIN power_in Supply voltage input; the RT8097A operates from a 2.7V to 6V input.
5 PG output Power good indicator, open-drain output with external pull-up resistor; pulled up when the FB voltage is within 90% (typ.), otherwise LOW.
6 FB input Feedback voltage input; an external resistor divider from the output to GND, tapped to the FB pin, sets the output voltage.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOT-23-6
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 2.7 6 V 5
Feedback Reference Voltage VREF 0.593 0.6 0.607 V 5
Feedback Leakage Current IFB 0.1 µA VFB = 0.6V 5
DC Bias Current, Active 22 µA Active, VFB = 0.63V, not switching 5
DC Bias Current, Shutdown 1 µA Shutdown 5
Switching Leakage Current 1 µA 5
Switching Frequency 0.8 1 1.2 MHz 5
Valley Current Limit ILIM 2.2 3.1 3.9 A 5
UVLO Threshold, rising VUVLO 2.25 2.5 V VDD rising 6
Enable Logic-High VIH 1.5 V 6
Enable Logic-Low VIL 0.4 V 6
Minimum Off Time 70 120 180 ns 6
Maximum Duty Cycle DMAX 70 % Note 5 6
Switch On Resistance, Low RNMOS 70 mΩ ISW = 0.3A 5
Switch On Resistance, High RPMOS 100 mΩ ISW = 0.3A 5
UVLO Threshold, falling VUVLO 2 V VDD falling 6
Over-Temperature Threshold 150 °C 6
PG Threshold Rising 90 % Rising, relative to VOUT 6
PG Threshold Falling 85 % Falling, relative to VOUT 6
PG Open-Drain Impedance 10 Ω PG = low 6
Soft-Start Time tSS 1.2 ms 6
Output Discharge Switch On Resistance 1.8 kΩ 6
Supply Input Voltage VIN -0.3 6.5 V 5
LX Pin Switch Voltage -4.5 7.5 V <20ns 5
Power Dissipation SOT-23-6 PD 1.09 W TA = 25°C 5
Lead Temperature 260 °C Soldering, 10 sec 5
Junction Temperature TJ -40 150 °C 5
Storage Temperature Range -65 150 °C 5
ESD Susceptibility HBM 2 kV HBM 5
Supply Input Voltage VIN 2.7 6 V 5
Ambient Temperature Range TA -40 85 °C 5
Junction Temperature Range TJ -40 125 °C 5
Thermal Resistance Junction to Ambient SOT-23-6 θJA 91.5 °C/W TA = 25°C, two-layer 45mm x 45mm board, 1oz copper 5
Thermal Resistance Junction to Case SOT-23-6 θJC 14 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: RT8097AHGE
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.092 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (16 pp, sha256 22804c216fd53f30, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF