main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rt8073gqw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rt8073gqw: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rt8073gqw: specified limits as data (metadata.characteristics, 20 rows from the datasheet) · Ray
rt8073gqw-etched.fit.json rt8073gqw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rt8073gqw-hero.glb rt8073gqw: hero from the plain model · Ray
rt8073gqw-hero.overlay.json rt8073gqw: hero from the plain model · Ray
rt8073gqw.glb Publish 0.1.0 · Ray
rt8073gqw.kicad_mod Publish 0.1.0 · Ray
rt8073gqw.kicad_sym Publish 0.1.0 · Ray
rt8073gqw.lbr Publish 0.1.0 · Ray
rt8073gqw.step Publish 0.1.0 · Ray

RT8073GQW

Richtek Tech · DC-DC Converters · WDFN-12(3x3)

RT8073GQW from Richtek Tech, in a WDFN-12(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Compensation node. Error amplifier output; connect an external RC network to GND to set the loop compensation for the current-mode control loop.
2 PGOOD output Power Good open-drain output. High impedance when VFB is within ~94%-106% of VREF (regulated). Internally pulled low during shutdown, thermal shutdown, or VIN under UVLO.
3 SS input Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 µs internal soft-start.
4 EN input Chip Enable. Pull high (VIH ≥ 1.5V, ≤ 5.5V) to enable, low (VIL ≤ 0.4V) to disable. Internally pulled up so the pin defaults high when floating.
5 VIN power_in Power input, 2.9V to 5.5V. Supplies both the internal control circuitry and the high-side power MOSFET. Bypass with a low-ESR ceramic capacitor to PGND close to the pin.
6 VIN power_in Power input (tied to pin 5), 2.9V to 5.5V. Supplies the high-side power MOSFET; the two VIN pins should be bypassed together to PGND.
7 BOOT power_in Bootstrap supply for the high-side gate driver. Connect a bootstrap capacitor (typ. 10 nF) between BOOT and LX; the cap is charged from an internal supply when LX is low. Absolute max BOOT-to-LX = 6V.
8 LX power_out Switch node. Common drain of the internal high-side and low-side power MOSFETs; connect to the external inductor. Pins 8/9/10 are tied together internally and must all be connected to carry the 6A switch current.
9 LX power_out Switch node (tied to pins 8 and 10). Connect to the external inductor to carry the up-to-6A switching current.
10 LX power_out Switch node (tied to pins 8 and 9). Connect to the external inductor to carry the up-to-6A switching current.
11 RT input Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 kΩ → ~1.4 MHz). Floating RT defaults to ~300 kHz.
12 FB input Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V ±1%.
13 PGND power_in Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (θJA ≈ 60 °C/W).

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WDFN-12(3x3)
Category PMIC
Pins 13

Ordering variants

Same part, different packaging or reel option.

  • RT8073GQW
  • RT8073GQWSP

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Input Voltage (recommended operating) VIN 2.9 5.5 V 5
Junction Temperature Range -40 125 °C 5
Ambient Temperature Range -40 85 °C 5
Supply Input Voltage VIN -0.3 6.5 V 5
BOOT to LX -0.3 6 V 5
Other Pins -0.3 V Upper limit printed as (VIN + 0.3V) 5
Power Dissipation, WDFN-12L 3x3 PD 1.667 W TA = 25°C 5
Junction Temperature 150 °C 5
Storage Temperature Range -65 150 °C 5
Lead Temperature (Soldering) 260 °C 10 sec. 5
ESD Susceptibility HBM 2 kV Human Body Model 5
Package Thermal Resistance WDFN-12L 3x3, junction to ambient θJA 60 °C/W JEDEC 51-7 four-layer board 5
Package Thermal Resistance WDFN-12L 3x3, junction to case θJC 7.5 °C/W Measured at exposed pad 5
Under Voltage Lockout Threshold VUVLO 2.6 2.8 V VIN Rising 5
Shutdown Current ISHDN 2 5 μA 5
Voltage Reference VREF 0.792 0.8 0.808 V 5
EN Input Voltage Logic-High VIH 1.5 5.5 V 5
EN Input Voltage Logic-Low VIL 0.4 V 5
Switching Frequency range (adjustable by RT) fOSC 300 2000 kHz 5
Current Limit Threshold 7 9 A 6

CAD (KiCad official)

  • Symbol: RT8073GQW
  • Footprint: Package_DFN_QFN:WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm
  • 3D model: WDFN-12(3x3) (KiCad packages3D, STEP)
  • 3D model files: rt8073gqw-etched.step / rt8073gqw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt8073gqw.step / rt8073gqw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (16 pp, sha256 7d74cc5474f30a1b, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF