3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRT8073GQW
Richtek Tech · DC-DC Converters · WDFN-12(3x3)
RT8073GQW from Richtek Tech, in a WDFN-12(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Compensation node. Error amplifier output; connect an external RC network to GND to set the loop compensation for the current-mode control loop. |
| 2 | PGOOD | output | Power Good open-drain output. High impedance when VFB is within ~94%-106% of VREF (regulated). Internally pulled low during shutdown, thermal shutdown, or VIN under UVLO. |
| 3 | SS | input | Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 µs internal soft-start. |
| 4 | EN | input | Chip Enable. Pull high (VIH ≥ 1.5V, ≤ 5.5V) to enable, low (VIL ≤ 0.4V) to disable. Internally pulled up so the pin defaults high when floating. |
| 5 | VIN | power_in | Power input, 2.9V to 5.5V. Supplies both the internal control circuitry and the high-side power MOSFET. Bypass with a low-ESR ceramic capacitor to PGND close to the pin. |
| 6 | VIN | power_in | Power input (tied to pin 5), 2.9V to 5.5V. Supplies the high-side power MOSFET; the two VIN pins should be bypassed together to PGND. |
| 7 | BOOT | power_in | Bootstrap supply for the high-side gate driver. Connect a bootstrap capacitor (typ. 10 nF) between BOOT and LX; the cap is charged from an internal supply when LX is low. Absolute max BOOT-to-LX = 6V. |
| 8 | LX | power_out | Switch node. Common drain of the internal high-side and low-side power MOSFETs; connect to the external inductor. Pins 8/9/10 are tied together internally and must all be connected to carry the 6A switch current. |
| 9 | LX | power_out | Switch node (tied to pins 8 and 10). Connect to the external inductor to carry the up-to-6A switching current. |
| 10 | LX | power_out | Switch node (tied to pins 8 and 9). Connect to the external inductor to carry the up-to-6A switching current. |
| 11 | RT | input | Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 kΩ → ~1.4 MHz). Floating RT defaults to ~300 kHz. |
| 12 | FB | input | Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V ±1%. |
| 13 | PGND | power_in | Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (θJA ≈ 60 °C/W). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | WDFN-12(3x3) |
| Category | PMIC |
| Pins | 13 |
Ordering variants
Same part, different packaging or reel option.
RT8073GQWRT8073GQWSP
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Input Voltage (recommended operating) | VIN | 2.9 | 5.5 | V | 5 | ||
| Junction Temperature Range | -40 | 125 | °C | 5 | |||
| Ambient Temperature Range | -40 | 85 | °C | 5 | |||
| Supply Input Voltage | VIN | -0.3 | 6.5 | V | 5 | ||
| BOOT to LX | -0.3 | 6 | V | 5 | |||
| Other Pins | -0.3 | V | Upper limit printed as (VIN + 0.3V) | 5 | |||
| Power Dissipation, WDFN-12L 3x3 | PD | 1.667 | W | TA = 25°C | 5 | ||
| Junction Temperature | 150 | °C | 5 | ||||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature (Soldering) | 260 | °C | 10 sec. | 5 | |||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 5 | |||
| Package Thermal Resistance WDFN-12L 3x3, junction to ambient | θJA | 60 | °C/W | JEDEC 51-7 four-layer board | 5 | ||
| Package Thermal Resistance WDFN-12L 3x3, junction to case | θJC | 7.5 | °C/W | Measured at exposed pad | 5 | ||
| Under Voltage Lockout Threshold | VUVLO | 2.6 | 2.8 | V | VIN Rising | 5 | |
| Shutdown Current | ISHDN | 2 | 5 | μA | 5 | ||
| Voltage Reference | VREF | 0.792 | 0.8 | 0.808 | V | 5 | |
| EN Input Voltage Logic-High | VIH | 1.5 | 5.5 | V | 5 | ||
| EN Input Voltage Logic-Low | VIL | 0.4 | V | 5 | |||
| Switching Frequency range (adjustable by RT) | fOSC | 300 | 2000 | kHz | 5 | ||
| Current Limit Threshold | 7 | 9 | A | 6 |
CAD (KiCad official)
- Symbol:
RT8073GQW - Footprint:
Package_DFN_QFN:WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm - 3D model: WDFN-12(3x3) (KiCad packages3D, STEP)
- 3D model files:
rt8073gqw-etched.step/rt8073gqw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt8073gqw.step/rt8073gqw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (16 pp, sha256
7d74cc5474f30a1b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).