← Commit history

Initial commit: component/rt8073gqw

Ray ·ad8f0da910 ·
2 files changed +89
README.mdadded+55
@@ -0,0 +1,55 @@+# RT8073GQW++**Richtek Tech** · DC-DC Converters · WDFN-12(3x3)++RT8073GQW from Richtek Tech, in a WDFN-12(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Compensation node. Error amplifier output; connect an external RC network to GND to set the loop compensation for the current-mode control loop. |+| 2 | PGOOD | output | Power Good open-drain output. High impedance when VFB is within ~94%-106% of VREF (regulated). Internally pulled low during shutdown, thermal shutdown, or VIN under UVLO. |+| 3 | SS | input | Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 µs internal soft-start. |+| 4 | EN | input | Chip Enable. Pull high (VIH ≥ 1.5V, ≤ 5.5V) to enable, low (VIL ≤ 0.4V) to disable. Internally pulled up so the pin defaults high when floating. |+| 5 | VIN | power_in | Power input, 2.9V to 5.5V. Supplies both the internal control circuitry and the high-side power MOSFET. Bypass with a low-ESR ceramic capacitor to PGND close to the pin. |+| 6 | VIN | power_in | Power input (tied to pin 5), 2.9V to 5.5V. Supplies the high-side power MOSFET; the two VIN pins should be bypassed together to PGND. |+| 7 | BOOT | power_in | Bootstrap supply for the high-side gate driver. Connect a bootstrap capacitor (typ. 10 nF) between BOOT and LX; the cap is charged from an internal supply when LX is low. Absolute max BOOT-to-LX = 6V. |+| 8 | LX | power_out | Switch node. Common drain of the internal high-side and low-side power MOSFETs; connect to the external inductor. Pins 8/9/10 are tied together internally and must all be connected to carry the 6A switch current. |+| 9 | LX | power_out | Switch node (tied to pins 8 and 10). Connect to the external inductor to carry the up-to-6A switching current. |+| 10 | LX | power_out | Switch node (tied to pins 8 and 9). Connect to the external inductor to carry the up-to-6A switching current. |+| 11 | RT | input | Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 kΩ → ~1.4 MHz). Floating RT defaults to ~300 kHz. |+| 12 | FB | input | Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V ±1%. |+| 13 | PGND | power_in | Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (θJA ≈ 60 °C/W). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Richtek Tech |+| Package | WDFN-12(3x3) |+| Category | PMIC |+| Pins | 13 |++## Ordering variants++Same part, different packaging or reel option.++- `RT8073GQW`+- `RT8073GQWSP`++## CAD (KiCad official)++- Symbol: `RT8073GQW`+- Footprint: `Package_DFN_QFN:WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm`+- 3D model: WDFN-12(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Richtek Tech datasheet](docs/rt8073gqw-datasheet.pdf) (16 pp, sha256 `7d74cc5474f30a1b`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rt8073gqw-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "rt8073gqw",+  "version": "0.1.0",+  "type": "component",+  "description": "Richtek Tech DC-DC Converters, WDFN-12(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "rt8073gqw"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "rt8073gqw.kicad_sym",+    "rt8073gqw.kicad_mod",+    "rt8073gqw.glb",+    "rt8073gqw.step",+    "rt8073gqw.lbr",+    "docs/hero.png",+    "docs/rt8073gqw-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file