← Commit history

rt8073gqw: factory component page (tier=lcsc)

Ray ·8d9b659e31 · ·parent 5e8e670
1 file changed +156−8
page.json+156−8
@@ -1,13 +1,166 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "rt8073gqw",+  "title": "RT8073GQW",+  "brief": "Richtek Tech DC-DC Converters, WDFN-12(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Richtek Tech DC-DC Converters, WDFN-12(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "rt8073gqw"   ],+  "component": {+    "mpn": "RT8073GQW",+    "manufacturer": "Richtek Tech",+    "package": "WDFN-12(3x3)",+    "pin_count": 13,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311210909_Richtek-Tech-RT8073GQW_C294548.pdf",+    "parts": {+      "symbol": "rt8073gqw.kicad_sym",+      "footprint": "rt8073gqw.kicad_mod",+      "model_3d": "rt8073gqw.glb",+      "model_3d_step": "rt8073gqw.step",+      "lbr": "rt8073gqw.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Compensation node. Error amplifier output; connect an external RC network to GND to set the loop compensation for the current-mode control loop."+      },+      {+        "number": "2",+        "name": "PGOOD",+        "type": "output",+        "description": "Power Good open-drain output. High impedance when VFB is within ~94%-106% of VREF (regulated). Internally pulled low during shutdown, thermal shutdown, or VIN under UVLO."+      },+      {+        "number": "3",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 \u00b5s internal soft-start."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Chip Enable. Pull high (VIH \u2265 1.5V, \u2264 5.5V) to enable, low (VIL \u2264 0.4V) to disable. Internally pulled up so the pin defaults high when floating."+      },+      {+        "number": "5",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input, 2.9V to 5.5V. Supplies both the internal control circuitry and the high-side power MOSFET. Bypass with a low-ESR ceramic capacitor to PGND close to the pin."+      },+      {+        "number": "6",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input (tied to pin 5), 2.9V to 5.5V. Supplies the high-side power MOSFET; the two VIN pins should be bypassed together to PGND."+      },+      {+        "number": "7",+        "name": "BOOT",+        "type": "power_in",+        "description": "Bootstrap supply for the high-side gate driver. Connect a bootstrap capacitor (typ. 10 nF) between BOOT and LX; the cap is charged from an internal supply when LX is low. Absolute max BOOT-to-LX = 6V."+      },+      {+        "number": "8",+        "name": "LX",+        "type": "power_out",+        "description": "Switch node. Common drain of the internal high-side and low-side power MOSFETs; connect to the external inductor. Pins 8/9/10 are tied together internally and must all be connected to carry the 6A switch current."+      },+      {+        "number": "9",+        "name": "LX",+        "type": "power_out",+        "description": "Switch node (tied to pins 8 and 10). Connect to the external inductor to carry the up-to-6A switching current."+      },+      {+        "number": "10",+        "name": "LX",+        "type": "power_out",+        "description": "Switch node (tied to pins 8 and 9). Connect to the external inductor to carry the up-to-6A switching current."+      },+      {+        "number": "11",+        "name": "RT",+        "type": "input",+        "description": "Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 k\u03a9 \u2192 ~1.4 MHz). Floating RT defaults to ~300 kHz."+      },+      {+        "number": "12",+        "name": "FB",+        "type": "input",+        "description": "Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V \u00b11%."+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (\u03b8JA \u2248 60 \u00b0C/W)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311210909_Richtek-Tech-RT8073GQW_C294548.pdf",+        "pages": 16,+        "sha256": "7d74cc5474f30a1b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 13,+        "described": 13,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Richtek Tech",+      "Package": "WDFN-12(3x3)",+      "Category": "PMIC",+      "Pins": "13"+    }+  },+  "variants": [+    {+      "mpn": "RT8073GQW",+      "kind": "packaging"+    },+    {+      "mpn": "RT8073GQWSP",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "rt8073gqw"+  ],+  "discovery_pitch": "RT8073GQW (Richtek Tech) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +178,5 @@     "docs/rt8073gqw-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file