← Commit history
page.json+9−6@@ -44,13 +44,13 @@ "number": "3", "name": "SS", "type": "input",- "description": "Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 \u00b5s internal soft-start."+ "description": "Soft-start control. An internal current source charges an external capacitor to build the soft-start ramp (VSS); VFB tracks VSS during startup. Float pin to use the ~800 µs internal soft-start." }, { "number": "4", "name": "EN", "type": "input",- "description": "Chip Enable. Pull high (VIH \u2265 1.5V, \u2264 5.5V) to enable, low (VIL \u2264 0.4V) to disable. Internally pulled up so the pin defaults high when floating."+ "description": "Chip Enable. Pull high (VIH ≥ 1.5V, ≤ 5.5V) to enable, low (VIL ≤ 0.4V) to disable. Internally pulled up so the pin defaults high when floating." }, { "number": "5",@@ -92,19 +92,19 @@ "number": "11", "name": "RT", "type": "input",- "description": "Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 k\u03a9 \u2192 ~1.4 MHz). Floating RT defaults to ~300 kHz."+ "description": "Frequency setting pin. Connect a resistor from RT to GND to set switching frequency (300 kHz to 2 MHz; e.g. RT = 28.7 kΩ → ~1.4 MHz). Floating RT defaults to ~300 kHz." }, { "number": "12", "name": "FB", "type": "input",- "description": "Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V \u00b11%."+ "description": "Feedback voltage input. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V ±1%." }, { "number": "13", "name": "PGND", "type": "power_in",- "description": "Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (\u03b8JA \u2248 60 \u00b0C/W)."+ "description": "Power ground / exposed thermal pad. Return for the low-side power MOSFET and the ground reference for the IC. Must be soldered to a large PCB copper area for thermal dissipation (θJA ≈ 60 °C/W)." } ], "provenance": {@@ -178,5 +178,8 @@ "docs/rt8073gqw-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }