Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| package.json | |
| page.json | |
| README.md | |
| rt7276gqw-hero.glb | |
| rt7276gqw-hero.overlay.json | |
| rt7276gqw.glb | |
| rt7276gqw.kicad_mod | |
| rt7276gqw.kicad_sym | |
| rt7276gqw.lbr | |
| rt7276gqw.step |
RT7276GQW
Richtek Tech · DC-DC Converters · WDFN-10(3x3)
RT7276GQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control input: connect to a logic-high voltage to enable the IC or logic-low to disable, and do not leave this high-impedance input unconnected. |
| 2 | FB | input | Feedback input connected to the midpoint of the external resistive divider (placed within 5mm of the pin); the IC regulates VFB at 0.765V typical. |
| 3 | PVCC | power_out | Output of the internal 5.1V linear regulator powered from VIN; connect a 1µF ceramic capacitor from PVCC to ground. |
| 4 | SS | passive | Soft-start control: connect an external capacitor between this pin and ground to set the soft-start time. |
| 5 | PGOOD | output | Open-drain power-good output that connects to PGND whenever VFB is less than 90% of its regulation threshold (typical). |
| 6 | SW | passive | Switching node, the source of the internal N-channel MOSFET switch and drain of the synchronous rectifier; connect to the inductor with a wide short trace and minimize its area to reduce EMI. |
| 7 | SW | passive | Switching node, the source of the internal N-channel MOSFET switch and drain of the synchronous rectifier; connect to the inductor with a wide short trace and minimize its area to reduce EMI. |
| 8 | BOOT | passive | Bootstrap supply for the high-side gate driver; connect a 0.1µF capacitor between BOOT and SW. |
| 9 | VIN | power_in | Power input (drain of the internal N-channel MOSFET switch, 4.5V to 18V operating) that also supplies the internal linear regulator; connect to the input capacitor. |
| 10 | VIN | power_in | Power input (drain of the internal N-channel MOSFET switch, 4.5V to 18V operating) that also supplies the internal linear regulator; connect to the input capacitor. |
| 11 | PGND | power_in | Power ground (exposed pad) connected to the source of the internal synchronous rectifier; should be well soldered to the input and output capacitors and a large PCB area for power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | WDFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (Shutdown) | 1 | 10 | µA | VEN = 0V | 3 | ||
| EN Voltage Logic High | VIH | 1.2 | 1.5 | 2 | V | 3 | |
| EN Voltage Logic Low | VIL | 0.4 | 1.3 | 1.7 | V | 3 | |
| Feedback Threshold Voltage | VFB_TH | 0.757 | 0.765 | 0.773 | V | 4.5V ≤ VIN ≤ 18V | 3 |
| Feedback Input Current | IFB | -0.1 | 0 | 0.1 | µA | VFB = 0.8V | 3 |
| VOUT Discharge Resistance | RDIS | 50 | 100 | Ω | VEN = 0V, VVOUT = 0.5V | 3 | |
| PVCC Output Voltage | VPVCC | 4.7 | 5.1 | 5.5 | V | 6V ≤ VIN ≤ 18V, 0 < IPVCC < 5mA | 3 |
| PVCC Line Regulation | 20 | mV | 6V ≤ VIN ≤ 18V, IPVCC = 5mA | 3 | |||
| PVCC Load Regulation | 40 | mV | 0 < IPVCC < 50mA | 4 | |||
| High-Side Leakage Current | 1 | µA | VIN = 12V, VEN = 0V | 4 | |||
| Current Limit (upper threshold) | ILIM | 3.5 | 4.5 | 5.7 | A | LSW = 1.4µH | 4 |
| SS Charge Current | 1.4 | 2 | 2.6 | µA | VSS = 0V | 4 | |
| SS Discharge Current | 0.05 | 0.1 | mA | VSS = 0.5V | 4 | ||
| UVLO Threshold | 3.55 | 3.85 | 4.15 | V | VVIN / VVINR rising, enable PVCC regulator | 4 | |
| PGOOD Threshold (VFB rising) | 85 | 90 | 95 | % | VFB rising | 4 | |
| OVP Trip Threshold | 115 | 120 | 125 | % | VFB rising | 4 | |
| UVP Trip Threshold | 65 | 70 | 75 | % | VFB falling | 4 | |
| Supply Current (Quiescent) | 0.7 | mA | VEN = 3V, VFB = 1V | 3 | |||
| High-Side RDS(ON) | RDS(ON)_H | 90 | mΩ | For WDFN-10L 3x3 | 4 | ||
| Low-Side RDS(ON) | RDS(ON)_L | 60 | mΩ | 4 | |||
| Thermal Shutdown Threshold | TSD | 150 | °C | 4 | |||
| On-Time | tON | 145 | ns | VIN = 12V, VOUT = 1.05V | 4 | ||
| Minimum On-Time | tON(MIN) | 60 | ns | 4 | |||
| Minimum Off-Time | tOFF(MIN) | 230 | ns | 4 | |||
| Supply Input Voltage | VIN | 4.5 | 18 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Supply Input Voltage | VIN | -0.3 | 21 | V | VIN, VINR | 3 | |
| Switch Node SW | SW | -0.8 | V | upper limit VVIN + 0.3V | 3 | ||
| Switch Node SW (<10ns) | SW | -5 | 25 | V | <10ns | 3 | |
| BOOT to SW | -0.3 | 6 | V | 3 | |||
| PVCC | PVCC | -0.3 | 6 | V | 3 | ||
| PVCC to VIN | -18 | 0.3 | V | WDFN-10L 3x3 | 3 | ||
| Other Pins | -0.3 | 21 | V | 3 | |||
| Power Dissipation | PD | 1.67 | W | TA = 25°C, WDFN-10L 3x3 | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| ESD Susceptibility HBM | 2 | kV | HBM | 3 | |||
| Thermal Resistance Junction to Ambient | θJA | 60 | °C/W | WDFN-10L 3x3 | 3 | ||
| Thermal Resistance Junction to Case | θJC | 7.5 | °C/W | WDFN-10L 3x3 | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | long 2oz. copper traces connected to each IC pin and | 21 |
CAD (KiCad official)
- Symbol:
RT7276GQW - Footprint:
Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm - 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
rt7276gqw-etched.step/rt7276gqw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt7276gqw.step/rt7276gqw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (24 pp, sha256
79874faeb3ed8a60, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).