Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT7276GQW

Richtek Tech · DC-DC Converters · WDFN-10(3x3)

RT7276GQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable control input: connect to a logic-high voltage to enable the IC or logic-low to disable, and do not leave this high-impedance input unconnected.
2 FB input Feedback input connected to the midpoint of the external resistive divider (placed within 5mm of the pin); the IC regulates VFB at 0.765V typical.
3 PVCC power_out Output of the internal 5.1V linear regulator powered from VIN; connect a 1µF ceramic capacitor from PVCC to ground.
4 SS passive Soft-start control: connect an external capacitor between this pin and ground to set the soft-start time.
5 PGOOD output Open-drain power-good output that connects to PGND whenever VFB is less than 90% of its regulation threshold (typical).
6 SW passive Switching node, the source of the internal N-channel MOSFET switch and drain of the synchronous rectifier; connect to the inductor with a wide short trace and minimize its area to reduce EMI.
7 SW passive Switching node, the source of the internal N-channel MOSFET switch and drain of the synchronous rectifier; connect to the inductor with a wide short trace and minimize its area to reduce EMI.
8 BOOT passive Bootstrap supply for the high-side gate driver; connect a 0.1µF capacitor between BOOT and SW.
9 VIN power_in Power input (drain of the internal N-channel MOSFET switch, 4.5V to 18V operating) that also supplies the internal linear regulator; connect to the input capacitor.
10 VIN power_in Power input (drain of the internal N-channel MOSFET switch, 4.5V to 18V operating) that also supplies the internal linear regulator; connect to the input capacitor.
11 PGND power_in Power ground (exposed pad) connected to the source of the internal synchronous rectifier; should be well soldered to the input and output capacitors and a large PCB area for power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WDFN-10(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (Shutdown) 1 10 µA VEN = 0V 3
EN Voltage Logic High VIH 1.2 1.5 2 V 3
EN Voltage Logic Low VIL 0.4 1.3 1.7 V 3
Feedback Threshold Voltage VFB_TH 0.757 0.765 0.773 V 4.5V ≤ VIN ≤ 18V 3
Feedback Input Current IFB -0.1 0 0.1 µA VFB = 0.8V 3
VOUT Discharge Resistance RDIS 50 100 Ω VEN = 0V, VVOUT = 0.5V 3
PVCC Output Voltage VPVCC 4.7 5.1 5.5 V 6V ≤ VIN ≤ 18V, 0 < IPVCC < 5mA 3
PVCC Line Regulation 20 mV 6V ≤ VIN ≤ 18V, IPVCC = 5mA 3
PVCC Load Regulation 40 mV 0 < IPVCC < 50mA 4
High-Side Leakage Current 1 µA VIN = 12V, VEN = 0V 4
Current Limit (upper threshold) ILIM 3.5 4.5 5.7 A LSW = 1.4µH 4
SS Charge Current 1.4 2 2.6 µA VSS = 0V 4
SS Discharge Current 0.05 0.1 mA VSS = 0.5V 4
UVLO Threshold 3.55 3.85 4.15 V VVIN / VVINR rising, enable PVCC regulator 4
PGOOD Threshold (VFB rising) 85 90 95 % VFB rising 4
OVP Trip Threshold 115 120 125 % VFB rising 4
UVP Trip Threshold 65 70 75 % VFB falling 4
Supply Current (Quiescent) 0.7 mA VEN = 3V, VFB = 1V 3
High-Side RDS(ON) RDS(ON)_H 90 mΩ For WDFN-10L 3x3 4
Low-Side RDS(ON) RDS(ON)_L 60 mΩ 4
Thermal Shutdown Threshold TSD 150 °C 4
On-Time tON 145 ns VIN = 12V, VOUT = 1.05V 4
Minimum On-Time tON(MIN) 60 ns 4
Minimum Off-Time tOFF(MIN) 230 ns 4
Supply Input Voltage VIN 4.5 18 V 3
Junction Temperature Range TJ -40 125 °C 3
Ambient Temperature Range TA -40 85 °C 3
Supply Input Voltage VIN -0.3 21 V VIN, VINR 3
Switch Node SW SW -0.8 V upper limit VVIN + 0.3V 3
Switch Node SW (<10ns) SW -5 25 V <10ns 3
BOOT to SW -0.3 6 V 3
PVCC PVCC -0.3 6 V 3
PVCC to VIN -18 0.3 V WDFN-10L 3x3 3
Other Pins -0.3 21 V 3
Power Dissipation PD 1.67 W TA = 25°C, WDFN-10L 3x3 3
Junction Temperature TJ 150 °C 3
Lead Temperature 260 °C Soldering, 10 sec. 3
Storage Temperature Range -65 150 °C 3
ESD Susceptibility HBM 2 kV HBM 3
Thermal Resistance Junction to Ambient θJA 60 °C/W WDFN-10L 3x3 3
Thermal Resistance Junction to Case θJC 7.5 °C/W WDFN-10L 3x3 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper long 2oz. copper traces connected to each IC pin and 21

CAD (KiCad official)

  • Symbol: RT7276GQW
  • Footprint: Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm
  • 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: rt7276gqw-etched.step / rt7276gqw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt7276gqw.step / rt7276gqw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (24 pp, sha256 79874faeb3ed8a60, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF