main
Ray
rt2101agqw: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
399744e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248
{
"schema_version": 1,
"type": "component",
"slug": "rt2101agqw",
"title": "RT2101AGQW",
"brief": "Richtek Tech DC-DC Converters, WQFN-16(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"rt2101agqw"
],
"component": {
"mpn": "RT2101AGQW",
"manufacturer": "Richtek Tech",
"package": "WQFN-16(3x3)",
"pin_count": 17,
"category": "PMIC",
"subcategory": "DC-DC Converters",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2312092358_Richtek-Tech-RT2101AGQW_C6288582.pdf",
"parts": {
"symbol": "rt2101agqw.kicad_sym",
"footprint": "rt2101agqw.kicad_mod",
"model_3d": "rt2101agqw-etched.glb",
"model_3d_plain": "rt2101agqw.glb",
"model_3d_step": "rt2101agqw-etched.step",
"model_3d_step_plain": "rt2101agqw.step",
"lbr": "rt2101agqw.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "VIN",
"type": "power_in",
"description": "Power input. Supply range 2.95V to 6V (absolute max −0.3V to 7V). Tie pins 1, 2, and 16 together and bypass to GND with a low-ESR ceramic capacitor."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Power input. Supply range 2.95V to 6V. Connect together with pins 1 and 16."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Power ground. Tie pins 3, 4, and the exposed pad (17) together and to the PCB ground plane for maximum power dissipation."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Power ground. Tie pins 3, 4, and the exposed pad (17) together and to the PCB ground plane for maximum power dissipation."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Analog ground. Reference ground for the analog control circuitry; connect to the PCB ground plane via a quiet return path."
},
{
"number": "6",
"name": "FB",
"type": "input",
"description": "Feedback input to the error amplifier. Regulates to the internal 0.827V (typ) reference; output voltage is set by an external R1/R2 divider from VOUT to FB to GND. Adjustable range 0.827V to 3.6V."
},
{
"number": "7",
"name": "COMP",
"type": "output",
"description": "Compensation node for converter stability. Connect an external RC network from COMP to AGND to shape the error-amplifier response."
},
{
"number": "8",
"name": "RT/SYNC",
"type": "bidirectional",
"description": "Frequency setting and external synchronous clock input. Connect a resistor RRT to GND to set the switching frequency (700kHz to 2MHz; e.g. 180kΩ → ~1MHz, 60kΩ → ~2.2MHz), or drive with an external clock in the 700kHz-2MHz range to synchronize."
},
{
"number": "9",
"name": "SS/TR",
"type": "passive",
"description": "Soft-start and tracking. An internal 2.2µA current source charges an external CSS capacitor to set the soft-start ramp; VFB tracks VSS during startup. CSS(nF) = tSS(ms) × 2.2µA / 0.827V."
},
{
"number": "10",
"name": "SW",
"type": "power_out",
"description": "Switch node. Connect to external inductor of the L-C output filter. Voltage rating −1V to (VIN + 0.3V) DC, −5V to (VIN + 5V) for <100ns transients. Pins 10, 11, 12 are tied internally and must all connect to the inductor."
},
{
"number": "11",
"name": "SW",
"type": "power_out",
"description": "Switch node. Connect to external inductor. Tie pins 10, 11, 12 together."
},
{
"number": "12",
"name": "SW",
"type": "power_out",
"description": "Switch node. Connect to external inductor. Tie pins 10, 11, 12 together."
},
{
"number": "13",
"name": "BOOT",
"type": "power_in",
"description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a ~0.1µF capacitor between BOOT and SW. BOOT-to-SW absolute max −0.3V to 7V."
},
{
"number": "14",
"name": "PGOOD",
"type": "output",
"description": "Power-good indicator, open-drain. High-Z (good) when VFB is between ~93% and ~107% of VREF; pulled low (fault) when VFB falls below ~88% or rises above ~113% of VREF. Requires an external pull-up resistor."
},
{
"number": "15",
"name": "EN",
"type": "input",
"description": "Chip enable. Pull high (>1.25V typ rising) to enable, low (<1.18V typ falling) to disable. Internal pull-up current source (~4.9µA at VIH+50mV) enables the chip when the pin is left floating. External resistor divider from VIN can set a custom UVLO."
},
{
"number": "16",
"name": "VIN",
"type": "power_in",
"description": "Power input. Tie together with pins 1 and 2 and bypass with a low-ESR ceramic capacitor."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Exposed thermal pad. Must be soldered to a large PCB ground copper area and connected to GND for maximum power dissipation (θJC = 7.5°C/W, θJA = 30°C/W)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2312092358_Richtek-Tech-RT2101AGQW_C6288582.pdf",
"pages": 13,
"sha256": "1855bec30799896c",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rt2101agqw.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
3,
0.9
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4bafaf1bb48873ff43b364918bf5e1f4278a211ad76791ed7928096d98c1768a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "rt2101agqw-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
3,
0.9
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "af6c724bd4ac36899f90f4756e2de2104cfc4a539f9a1787dc4097ff81c41e27",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Richtek Tech",
"Package": "WQFN-16(3x3)",
"Category": "PMIC",
"Pins": "17"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"rt2101agqw"
],
"discovery_pitch": "RT2101AGQW (Richtek Tech) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rt2101agqw.kicad_sym",
"rt2101agqw.kicad_mod",
"rt2101agqw.glb",
"rt2101agqw.step",
"rt2101agqw.lbr",
"docs/hero.png",
"docs/rt2101agqw-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"rt2101agqw-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "RT2101AGQWG",
"kind": "packaging"
}
],
"updated_at": "2026-09-25T05:13:35.673Z"
}