main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs8032xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rs8032xk: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rs8032xk: specified limits as data (metadata.characteristics, 26 rows from the datasheet) · Ray
rs8032xk-etched.fit.json rs8032xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs8032xk-etched.glb rs8032xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs8032xk-etched.step rs8032xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs8032xk-hero.glb rs8032xk: hero from the plain model · Ray
rs8032xk-hero.overlay.json rs8032xk: hero from the plain model · Ray
rs8032xk.glb Publish 0.1.0 · Ray
rs8032xk.kicad_mod Publish 0.1.0 · Ray
rs8032xk.kicad_sym Publish 0.1.0 · Ray
rs8032xk.lbr rs8032xk: factory component page (tier=lcsc) · Ray
rs8032xk.step Publish 0.1.0 · Ray

RS8032XK

Jiangsu RUNIC Tech · Operational Amplifier · SOP-8

RS8032XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output. Rail-to-rail output stage; short-circuit current typically 11mA; output swings to within ~5mV of the rails with RL=50kΩ.
2 -IN A input Amplifier A inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; diode-clamped to the supplies (limit fault current to ≤10mA).
3 +IN A input Amplifier A non-inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; input bias current typ 1pA.
4 V- power_in Negative supply rail (or ground in single-supply operation). Total V+ to V- supply range 1.4V to 5.5V; absolute maximum 7.0V.
5 +IN B input Amplifier B non-inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; input bias current typ 1pA.
6 -IN B input Amplifier B inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; diode-clamped to the supplies (limit fault current to ≤10mA).
7 OUT B output Amplifier B output. Rail-to-rail output stage; short-circuit current typically 11mA; output swings to within ~5mV of the rails with RL=50kΩ.
8 V+ power_in Positive supply rail. Total V+ to V- supply range 1.4V to 5.5V; typical quiescent current 750nA per amplifier (1500nA total for the dual).

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS8032XK
  • RS8032XKXM
  • RS8032XKXT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Vs Operating Voltage Range Vs 1.4 5.5 V 3
Quiescent Current/Amplifier IQ 750 1500 nA 3
Power-Supply Rejection Ratio PSRR 62 70 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V 3
Input Offset Voltage Vos 0.5 3 mV Vcm=Vs/2 3
Input Offset Voltage Drift ΔVos/ΔT 2.3 µV/°C Vcm=Vs/2, -40°C ≤ TA ≤125°C 3
Input Bias Current IB 1 10 pA 3
Input Offset Current Ios 1 10 pA 3
Common-Mode Voltage Range Vcm -0.1 5.6 V Vs= 5.5V 3
Common-Mode Rejection Ratio CMRR 73 90 dB Vs= 5.5V, Vcm=-0.1V to 4V 3
Common-Mode Rejection Ratio CMRR 60 83 dB Vs= 5.5V, Vcm=-0.1V to 5.6V 3
Open-Loop Voltage Gain AOL 85 102 dB Vs=1.4V, RL=50KΩ, Vo=Vs-0.1V 3
Open-Loop Voltage Gain AOL 92 106 dB Vs=5.0V, RL=50kΩ, Vo=Vs-0.1V 3
Output Swing From Rail 5 mV RL=50KΩ 3
Output Short-Circuit Current Iout 11 mA 3
Slew Rate SR 7.5 V/ms 3
Gain-Bandwidth Product GBP 15 kHz 3
Phase Margin PM 60 ° 3
Input Voltage Noise enp-p 2.4 μVpp f = 0.1 Hz to 10 Hz 3
Input Voltage Noise Density en 160 nV/√Hz f = 1 kHz 3
Supply Voltage, V+ to V- 7 V 2
Input Terminals Voltage -0.5 V Upper limit printed as (V+)+0.5V; max not expressible as a number 2
Input Terminals Current -10 10 mA Printed as ±10mA 2
Storage Temperature -65 150 °C 2
Operating Temperature -40 125 °C 2
Junction Temperature 150 °C 2
Package Thermal Resistance SOIC-8 150 °C/W TA = +25°C 2

CAD (KiCad official)

  • Symbol: RS8032XK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs8032xk-etched.step / rs8032xk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8032xk.step / rs8032xk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (10 pp, sha256 95aafcf347416ede, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF