3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS8032XK
Jiangsu RUNIC Tech · Operational Amplifier · SOP-8
RS8032XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail output stage; short-circuit current typically 11mA; output swings to within ~5mV of the rails with RL=50kΩ. |
| 2 | -IN A | input | Amplifier A inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; diode-clamped to the supplies (limit fault current to ≤10mA). |
| 3 | +IN A | input | Amplifier A non-inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; input bias current typ 1pA. |
| 4 | V- | power_in | Negative supply rail (or ground in single-supply operation). Total V+ to V- supply range 1.4V to 5.5V; absolute maximum 7.0V. |
| 5 | +IN B | input | Amplifier B non-inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; input bias current typ 1pA. |
| 6 | -IN B | input | Amplifier B inverting input. Rail-to-rail input range -0.1V to +5.6V at Vs=5.5V; diode-clamped to the supplies (limit fault current to ≤10mA). |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail output stage; short-circuit current typically 11mA; output swings to within ~5mV of the rails with RL=50kΩ. |
| 8 | V+ | power_in | Positive supply rail. Total V+ to V- supply range 1.4V to 5.5V; typical quiescent current 750nA per amplifier (1500nA total for the dual). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
RS8032XKRS8032XKXMRS8032XKXT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Vs Operating Voltage Range | Vs | 1.4 | 5.5 | V | 3 | ||
| Quiescent Current/Amplifier | IQ | 750 | 1500 | nA | 3 | ||
| Power-Supply Rejection Ratio | PSRR | 62 | 70 | dB | Vs=2.5V to 5.5V, Vcm=(V-)+0.5V | 3 | |
| Input Offset Voltage | Vos | 0.5 | 3 | mV | Vcm=Vs/2 | 3 | |
| Input Offset Voltage Drift | ΔVos/ΔT | 2.3 | µV/°C | Vcm=Vs/2, -40°C ≤ TA ≤125°C | 3 | ||
| Input Bias Current | IB | 1 | 10 | pA | 3 | ||
| Input Offset Current | Ios | 1 | 10 | pA | 3 | ||
| Common-Mode Voltage Range | Vcm | -0.1 | 5.6 | V | Vs= 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 73 | 90 | dB | Vs= 5.5V, Vcm=-0.1V to 4V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 60 | 83 | dB | Vs= 5.5V, Vcm=-0.1V to 5.6V | 3 | |
| Open-Loop Voltage Gain | AOL | 85 | 102 | dB | Vs=1.4V, RL=50KΩ, Vo=Vs-0.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 92 | 106 | dB | Vs=5.0V, RL=50kΩ, Vo=Vs-0.1V | 3 | |
| Output Swing From Rail | 5 | mV | RL=50KΩ | 3 | |||
| Output Short-Circuit Current | Iout | 11 | mA | 3 | |||
| Slew Rate | SR | 7.5 | V/ms | 3 | |||
| Gain-Bandwidth Product | GBP | 15 | kHz | 3 | |||
| Phase Margin | PM | 60 | ° | 3 | |||
| Input Voltage Noise | enp-p | 2.4 | μVpp | f = 0.1 Hz to 10 Hz | 3 | ||
| Input Voltage Noise Density | en | 160 | nV/√Hz | f = 1 kHz | 3 | ||
| Supply Voltage, V+ to V- | 7 | V | 2 | ||||
| Input Terminals Voltage | -0.5 | V | Upper limit printed as (V+)+0.5V; max not expressible as a number | 2 | |||
| Input Terminals Current | -10 | 10 | mA | Printed as ±10mA | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Operating Temperature | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Package Thermal Resistance SOIC-8 | 150 | °C/W | TA = +25°C | 2 |
CAD (KiCad official)
- Symbol:
RS8032XK - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs8032xk-etched.step/rs8032xk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8032xk.step/rs8032xk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (10 pp, sha256
95aafcf347416ede, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).