main
Ray
rs6334xq: laser-etched CAD + chip hero (factory 2.0.0 backfill)
9e06775
RS6334XQ
Jiangsu RUNIC Tech · Operational Amplifier · TSSOP-14
RS6334XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail CMOS output, capable of ~55mA short-circuit current, swings to within 25mV of the supply rails with a 2kOhm load. |
| 2 | -IN A | input | Inverting input of amplifier A. High-impedance CMOS input (IB ~1pA typ) with common-mode range from -0.1V to (V+)+0.1V at Vs=5.5V. |
| 3 | +IN A | input | Non-inverting input of amplifier A. Rail-to-rail input, high-impedance CMOS input with 1pA typical bias current. |
| 4 | V+ | power_in | Positive supply pin, shared by all four amplifiers. Operating range 2.5V to 5.5V (V+ to V-), absolute maximum 7.0V. Quiescent current ~58uA per amplifier. |
| 5 | +IN B | input | Non-inverting input of amplifier B. Rail-to-rail CMOS input. |
| 6 | -IN B | input | Inverting input of amplifier B. Rail-to-rail CMOS input. |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail CMOS output. |
| 8 | OUT C | output | Amplifier C output. Rail-to-rail CMOS output. |
| 9 | -IN C | input | Inverting input of amplifier C. Rail-to-rail CMOS input. |
| 10 | +IN C | input | Non-inverting input of amplifier C. Rail-to-rail CMOS input. |
| 11 | V- | power_in | Negative supply / ground pin, shared by all four amplifiers. In single-supply operation this pin is tied to GND. V+ to V- must be within 2.5V to 5.5V. |
| 12 | +IN D | input | Non-inverting input of amplifier D. Rail-to-rail CMOS input. |
| 13 | -IN D | input | Inverting input of amplifier D. Rail-to-rail CMOS input. |
| 14 | OUT D | output | Amplifier D output. Rail-to-rail CMOS output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
RS6334XQRS6334XQXPRS6334XQXTQC16
CAD (KiCad official)
- Symbol:
RS6334XQ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
rs6334xq-etched.step/rs6334xq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs6334xq.step/rs6334xq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256
631d1d87ce16e5f5, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS6334XQ
**Jiangsu RUNIC Tech** · Operational Amplifier · TSSOP-14
RS6334XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail CMOS output, capable of ~55mA short-circuit current, swings to within 25mV of the supply rails with a 2kOhm load. |
| 2 | -IN A | input | Inverting input of amplifier A. High-impedance CMOS input (IB ~1pA typ) with common-mode range from -0.1V to (V+)+0.1V at Vs=5.5V. |
| 3 | +IN A | input | Non-inverting input of amplifier A. Rail-to-rail input, high-impedance CMOS input with 1pA typical bias current. |
| 4 | V+ | power_in | Positive supply pin, shared by all four amplifiers. Operating range 2.5V to 5.5V (V+ to V-), absolute maximum 7.0V. Quiescent current ~58uA per amplifier. |
| 5 | +IN B | input | Non-inverting input of amplifier B. Rail-to-rail CMOS input. |
| 6 | -IN B | input | Inverting input of amplifier B. Rail-to-rail CMOS input. |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail CMOS output. |
| 8 | OUT C | output | Amplifier C output. Rail-to-rail CMOS output. |
| 9 | -IN C | input | Inverting input of amplifier C. Rail-to-rail CMOS input. |
| 10 | +IN C | input | Non-inverting input of amplifier C. Rail-to-rail CMOS input. |
| 11 | V- | power_in | Negative supply / ground pin, shared by all four amplifiers. In single-supply operation this pin is tied to GND. V+ to V- must be within 2.5V to 5.5V. |
| 12 | +IN D | input | Non-inverting input of amplifier D. Rail-to-rail CMOS input. |
| 13 | -IN D | input | Inverting input of amplifier D. Rail-to-rail CMOS input. |
| 14 | OUT D | output | Amplifier D output. Rail-to-rail CMOS output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `RS6334XQ`
- `RS6334XQXP`
- `RS6334XQXTQC16`
## CAD (KiCad official)
- Symbol: `RS6334XQ`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `rs6334xq-etched.step` / `rs6334xq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs6334xq.step` / `rs6334xq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs6334xq-datasheet.pdf) (18 pp, sha256 `631d1d87ce16e5f5`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs6334xq-datasheet.pdf)