main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs6334xq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rs6334xq: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rs6334xq: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
rs6334xq-etched.fit.json rs6334xq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs6334xq-etched.glb rs6334xq: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs6334xq-etched.step rs6334xq: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs6334xq-hero.glb rs6334xq: hero from the plain model · Ray
rs6334xq-hero.overlay.json rs6334xq: hero from the plain model · Ray
rs6334xq.glb Publish 0.1.0 · Ray
rs6334xq.kicad_mod Publish 0.1.0 · Ray
rs6334xq.kicad_sym Publish 0.1.0 · Ray
rs6334xq.lbr rs6334xq: factory component page (tier=lcsc) · Ray
rs6334xq.step Publish 0.1.0 · Ray

RS6334XQ

Jiangsu RUNIC Tech · Operational Amplifier · TSSOP-14

RS6334XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output. Rail-to-rail CMOS output, capable of ~55mA short-circuit current, swings to within 25mV of the supply rails with a 2kOhm load.
2 -IN A input Inverting input of amplifier A. High-impedance CMOS input (IB ~1pA typ) with common-mode range from -0.1V to (V+)+0.1V at Vs=5.5V.
3 +IN A input Non-inverting input of amplifier A. Rail-to-rail input, high-impedance CMOS input with 1pA typical bias current.
4 V+ power_in Positive supply pin, shared by all four amplifiers. Operating range 2.5V to 5.5V (V+ to V-), absolute maximum 7.0V. Quiescent current ~58uA per amplifier.
5 +IN B input Non-inverting input of amplifier B. Rail-to-rail CMOS input.
6 -IN B input Inverting input of amplifier B. Rail-to-rail CMOS input.
7 OUT B output Amplifier B output. Rail-to-rail CMOS output.
8 OUT C output Amplifier C output. Rail-to-rail CMOS output.
9 -IN C input Inverting input of amplifier C. Rail-to-rail CMOS input.
10 +IN C input Non-inverting input of amplifier C. Rail-to-rail CMOS input.
11 V- power_in Negative supply / ground pin, shared by all four amplifiers. In single-supply operation this pin is tied to GND. V+ to V- must be within 2.5V to 5.5V.
12 +IN D input Non-inverting input of amplifier D. Rail-to-rail CMOS input.
13 -IN D input Inverting input of amplifier D. Rail-to-rail CMOS input.
14 OUT D output Amplifier D output. Rail-to-rail CMOS output.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • RS6334XQ
  • RS6334XQXP
  • RS6334XQXTQC16

CAD (KiCad official)

  • Symbol: RS6334XQ
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: rs6334xq-etched.step / rs6334xq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs6334xq.step / rs6334xq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256 631d1d87ce16e5f5, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF