9d95da7
RS6332XM
Jiangsu RUNIC Tech · Operational Amplifier · MSOP-8
RS6332XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail output, typical short-circuit current 55mA; swings within ~25mV of the rails at RL=2kOhm and ~8mV at RL=10kOhm. |
| 2 | -IN A | input | Amplifier A inverting input. Rail-to-rail input; common-mode range -0.1V to (V+)+0.1V at Vs=5.5V; input bias current ~1pA typical. |
| 3 | +IN A | input | Amplifier A non-inverting input. Rail-to-rail input; internal diode clamps to supply rails (limit external current to <=10mA if driven beyond rails). |
| 4 | V- | power_in | Negative supply (or ground for single-supply operation). Total supply voltage V+ to V- must be within 2.5V to 5.5V (absolute max 7.0V). |
| 5 | +IN B | input | Amplifier B non-inverting input. Rail-to-rail input; matches +IN A characteristics. |
| 6 | -IN B | input | Amplifier B inverting input. Rail-to-rail input; input bias current ~1pA typical. |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail output, typical short-circuit current 55mA. |
| 8 | V+ | power_in | Positive supply. Operating range 2.5V to 5.5V referenced to V-; quiescent current ~58uA per amplifier typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
RS6332XMRS6332XMXKRS6332XMXQRS6332XMXTDE8RS6332XMXTDC8
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | Vs | 2.5 | 5.5 | V | 25°C | 3 | |
| Common-Mode Voltage Range | Vcm | -0.1 | 5.6 | V | Vs=5.5V | 3 | |
| Input Offset Voltage | Vos | 0.6 | 3 | mV | Vcm =Vs/2, 25°C | 3 | |
| Input Bias Current | IB | 1 | 10 | pA | 25°C | 3 | |
| Input Offset Current | Ios | 1 | 10 | pA | 25°C | 3 | |
| Quiescent Current/Amplifier | IQ | 58 | 80 | uA | 25°C | 3 | |
| Input Offset Voltage Drift | Vos TC | 2 | uV/°C | -40°C to 125°C | 3 | ||
| Quiescent Current/Amplifier | IQ | 65 | uA | -40°C to 125°C | 3 | ||
| Output Swing From Rail | 25 | mV | RL = 2KΩ, 25°C | 3 | |||
| Output Swing From Rail | 8 | mV | RL = 10kΩ, 25°C | 3 | |||
| Output Short-Circuit Current | Iout | 55 | mA | 25°C | 3 | ||
| Slew Rate | SR | 0.5 | V/us | 25°C | 3 | ||
| Gain-Bandwidth Product | GBP | 1.1 | MHz | 25°C | 3 | ||
| Phase Margin | Φm | 64 | ° | 25°C | 3 | ||
| Settling Time, 0.1% | ts | 1.3 | us | 0.1%, 25°C | 3 | ||
| Overload Recovery Time | 2.3 | us | VIN • Gain ≥ Vs, 25°C | 3 | |||
| Input-Referred Voltage Noise | en | 22 | nV/√Hz | f = 1 kHz, 25°C | 3 | ||
| Input-Referred Voltage Noise | en | 20 | nV/√Hz | f = 10 kHz, 25°C | 3 | ||
| Input Terminals Voltage | -0.5 | V | Upper limit (V+)+0.5V; diode-clamped to supply rails | 2 | |||
| Input Terminals Current | -10 | 10 | mA | Input terminals | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Operating Temperature | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
RS6332XM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs6332xm-etched.step/rs6332xm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs6332xm.step/rs6332xm.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rs6332xm.step |
123 KB | You want the bare part, or you mark your own boards. |
rs6332xm-etched.step |
2.2 MB | You want the part with RS6332XM already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 517 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256
b116c9f04b5bdc78, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS6332XM
**Jiangsu RUNIC Tech** · Operational Amplifier · MSOP-8
RS6332XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail output, typical short-circuit current 55mA; swings within ~25mV of the rails at RL=2kOhm and ~8mV at RL=10kOhm. |
| 2 | -IN A | input | Amplifier A inverting input. Rail-to-rail input; common-mode range -0.1V to (V+)+0.1V at Vs=5.5V; input bias current ~1pA typical. |
| 3 | +IN A | input | Amplifier A non-inverting input. Rail-to-rail input; internal diode clamps to supply rails (limit external current to <=10mA if driven beyond rails). |
| 4 | V- | power_in | Negative supply (or ground for single-supply operation). Total supply voltage V+ to V- must be within 2.5V to 5.5V (absolute max 7.0V). |
| 5 | +IN B | input | Amplifier B non-inverting input. Rail-to-rail input; matches +IN A characteristics. |
| 6 | -IN B | input | Amplifier B inverting input. Rail-to-rail input; input bias current ~1pA typical. |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail output, typical short-circuit current 55mA. |
| 8 | V+ | power_in | Positive supply. Operating range 2.5V to 5.5V referenced to V-; quiescent current ~58uA per amplifier typical. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `RS6332XM`
- `RS6332XMXK`
- `RS6332XMXQ`
- `RS6332XMXTDE8`
- `RS6332XMXTDC8`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | Vs | 2.5 | | 5.5 | V | 25°C | 3 |
| Common-Mode Voltage Range | Vcm | -0.1 | | 5.6 | V | Vs=5.5V | 3 |
| Input Offset Voltage | Vos | | 0.6 | 3 | mV | Vcm =Vs/2, 25°C | 3 |
| Input Bias Current | IB | | 1 | 10 | pA | 25°C | 3 |
| Input Offset Current | Ios | | 1 | 10 | pA | 25°C | 3 |
| Quiescent Current/Amplifier | IQ | | 58 | 80 | uA | 25°C | 3 |
| Input Offset Voltage Drift | Vos TC | | 2 | | uV/°C | -40°C to 125°C | 3 |
| Quiescent Current/Amplifier | IQ | | 65 | | uA | -40°C to 125°C | 3 |
| Output Swing From Rail | | | 25 | | mV | RL = 2KΩ, 25°C | 3 |
| Output Swing From Rail | | | 8 | | mV | RL = 10kΩ, 25°C | 3 |
| Output Short-Circuit Current | Iout | | 55 | | mA | 25°C | 3 |
| Slew Rate | SR | | 0.5 | | V/us | 25°C | 3 |
| Gain-Bandwidth Product | GBP | | 1.1 | | MHz | 25°C | 3 |
| Phase Margin | Φm | | 64 | | ° | 25°C | 3 |
| Settling Time, 0.1% | ts | | 1.3 | | us | 0.1%, 25°C | 3 |
| Overload Recovery Time | | | 2.3 | | us | VIN • Gain ≥ Vs, 25°C | 3 |
| Input-Referred Voltage Noise | en | | 22 | | nV/√Hz | f = 1 kHz, 25°C | 3 |
| Input-Referred Voltage Noise | en | | 20 | | nV/√Hz | f = 10 kHz, 25°C | 3 |
| Input Terminals Voltage | | -0.5 | | | V | Upper limit (V+)+0.5V; diode-clamped to supply rails | 2 |
| Input Terminals Current | | -10 | | 10 | mA | Input terminals | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Operating Temperature | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
## CAD (KiCad official)
- Symbol: `RS6332XM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `rs6332xm-etched.step` / `rs6332xm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs6332xm.step` / `rs6332xm.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`rs6332xm.step`](rs6332xm.step) | 123 KB | You want the bare part, or you mark your own boards. |
| [`rs6332xm-etched.step`](rs6332xm-etched.step) | 2.2 MB | You want the part with `RS6332XM` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 517 faces against 147 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs6332xm-datasheet.pdf) (18 pp, sha256 `b116c9f04b5bdc78`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs6332xm-datasheet.pdf)