main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs6332xm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rs6332xm: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md rs6332xm: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray
rs6332xm-etched.fit.json rs6332xm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs6332xm-etched.glb rs6332xm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs6332xm-etched.step rs6332xm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs6332xm-hero.glb rs6332xm: hero from the plain model · Ray
rs6332xm-hero.overlay.json rs6332xm: hero from the plain model · Ray
rs6332xm.glb Publish 0.1.0 · Ray
rs6332xm.kicad_mod Publish 0.1.0 · Ray
rs6332xm.kicad_sym Publish 0.1.0 · Ray
rs6332xm.lbr Publish 0.1.0 · Ray
rs6332xm.step Publish 0.1.0 · Ray

RS6332XM

Jiangsu RUNIC Tech · Operational Amplifier · MSOP-8

RS6332XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output. Rail-to-rail output, typical short-circuit current 55mA; swings within ~25mV of the rails at RL=2kOhm and ~8mV at RL=10kOhm.
2 -IN A input Amplifier A inverting input. Rail-to-rail input; common-mode range -0.1V to (V+)+0.1V at Vs=5.5V; input bias current ~1pA typical.
3 +IN A input Amplifier A non-inverting input. Rail-to-rail input; internal diode clamps to supply rails (limit external current to <=10mA if driven beyond rails).
4 V- power_in Negative supply (or ground for single-supply operation). Total supply voltage V+ to V- must be within 2.5V to 5.5V (absolute max 7.0V).
5 +IN B input Amplifier B non-inverting input. Rail-to-rail input; matches +IN A characteristics.
6 -IN B input Amplifier B inverting input. Rail-to-rail input; input bias current ~1pA typical.
7 OUT B output Amplifier B output. Rail-to-rail output, typical short-circuit current 55mA.
8 V+ power_in Positive supply. Operating range 2.5V to 5.5V referenced to V-; quiescent current ~58uA per amplifier typical.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS6332XM
  • RS6332XMXK
  • RS6332XMXQ
  • RS6332XMXTDE8
  • RS6332XMXTDC8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range Vs 2.5 5.5 V 25°C 3
Common-Mode Voltage Range Vcm -0.1 5.6 V Vs=5.5V 3
Input Offset Voltage Vos 0.6 3 mV Vcm =Vs/2, 25°C 3
Input Bias Current IB 1 10 pA 25°C 3
Input Offset Current Ios 1 10 pA 25°C 3
Quiescent Current/Amplifier IQ 58 80 uA 25°C 3
Input Offset Voltage Drift Vos TC 2 uV/°C -40°C to 125°C 3
Quiescent Current/Amplifier IQ 65 uA -40°C to 125°C 3
Output Swing From Rail 25 mV RL = 2KΩ, 25°C 3
Output Swing From Rail 8 mV RL = 10kΩ, 25°C 3
Output Short-Circuit Current Iout 55 mA 25°C 3
Slew Rate SR 0.5 V/us 25°C 3
Gain-Bandwidth Product GBP 1.1 MHz 25°C 3
Phase Margin Φm 64 ° 25°C 3
Settling Time, 0.1% ts 1.3 us 0.1%, 25°C 3
Overload Recovery Time 2.3 us VIN • Gain ≥ Vs, 25°C 3
Input-Referred Voltage Noise en 22 nV/√Hz f = 1 kHz, 25°C 3
Input-Referred Voltage Noise en 20 nV/√Hz f = 10 kHz, 25°C 3
Input Terminals Voltage -0.5 V Upper limit (V+)+0.5V; diode-clamped to supply rails 2
Input Terminals Current -10 10 mA Input terminals 2
Storage Temperature -65 150 °C 2
Operating Temperature -40 125 °C 2
Junction Temperature 150 °C 2

CAD (KiCad official)

  • Symbol: RS6332XM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs6332xm-etched.step / rs6332xm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs6332xm.step / rs6332xm.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs6332xm.step 123 KB You want the bare part, or you mark your own boards.
rs6332xm-etched.step 2.2 MB You want the part with RS6332XM already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 517 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256 b116c9f04b5bdc78, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF