Generated by kicad-footprint-generator · KiCad file format 20260206
RS621KXF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS621KXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail swing, with output terminals diode-clamped to the supply rails and current limited to ±70mA or less beyond the rails. |
| 2 | V- | power_in | Negative (lowest) power supply; single-supply range 2.5V to 5.5V between V+ and V-. |
| 3 | +IN | input | Positive (noninverting) input, rail-to-rail common-mode range -0.1V to 5.6V at Vs=5.5V, diode-clamped to the rails with input current limited to 10mA. |
| 4 | -IN | input | Negative (inverting) input, rail-to-rail, diode-clamped to the supply rails with input current limited to 10mA. |
| 5 | V+ | power_in | Positive (highest) power supply, 2.5V to 5.5V recommended (7V absolute maximum), with a 0.1uF capacitor placed closely across the supply pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, Vs=(V+)-(V-) | Vs | 7 | V | 6 | |||
| Signal input pin voltage | -0.5 | 0.5 | V | Printed as (V-)-0.5 V min and (V+)+0.5 V max; offsets from supply rails | 6 | ||
| Signal output pin voltage | -0.5 | 0.5 | V | Printed as (V-)-0.5 V min and (V+)+0.5 V max; offsets from supply rails | 6 | ||
| Signal input pin current | -10 | 10 | mA | 6 | |||
| Signal output pin current | -70 | 70 | mA | 6 | |||
| Operating range, free-air temperature TA | TA | -40 | 125 | °C | 6 | ||
| Junction temperature TJ | TJ | 150 | °C | 6 | |||
| Storage temperature Tstg | Tstg | -65 | 150 | °C | 6 | ||
| ESD Human-body model (HBM) | V(ESD) | -5000 | 5000 | V | Human-body model (HBM); printed ±5000 V | 6 | |
| ESD Machine Model (MM) | V(ESD) | -400 | 400 | V | Machine Model (MM); printed ±400 V | 6 | |
| Supply voltage, single-supply | Vs | 2.5 | 5.5 | V | Single-supply | 6 | |
| Supply voltage, dual-supply | Vs | 1.25 | 2.75 | V | Dual-supply; printed ±1.25 V in MIN column and ±2.75 V in MAX column | 6 | |
| Operating voltage range | Vs | 2.5 | 5.5 | V | 25C | 9 | |
| Quiescent current per amplifier | IQ | 600 | 800 | uA | 25C | 9 | |
| Power-supply rejection ratio | PSRR | 78 | 93 | dB | Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, 25C | 9 | |
| Power-supply rejection ratio | PSRR | 72 | dB | Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, -40C to 125C | 9 | ||
| Input offset voltage | Vos | -3 | 0.7 | 3 | mV | 25C | 9 |
| Input offset voltage average drift | Vos TC | 2 | uV/C | -40C to 125C | 9 | ||
| Input bias current | IB | 1 | 10 | pA | 25C; printed ±1 typ and ±10 max | 9 | |
| Input offset current | Ios | 1 | 10 | pA | 25C; printed ±1 typ and ±10 max | 9 | |
| Common-mode voltage range | Vcm | -0.1 | 5.6 | V | Vs=5.5V, 25C | 9 | |
| Common-mode rejection ratio | CMRR | 74 | 92 | dB | Vs=5.5V, Vcm=-0.1V to 4V, 25C | 9 | |
| Common-mode rejection ratio | CMRR | 68 | dB | Vs=5.5V, Vcm=-0.1V to 4V, -40C to 125C | 9 | ||
| Common-mode rejection ratio | CMRR | 62 | 83 | dB | Vs=5.5V, Vcm=-0.1V to 5.6V, 25C | 9 | |
| Common-mode rejection ratio | CMRR | 60 | dB | Vs=5.5V, Vcm=-0.1V to 5.6V, -40C to 125C | 9 | ||
| Open-loop voltage gain | AOL | 96 | 102 | dB | RL=2KΩ, Vo=0.15V to 4.85V, 25C | 9 | |
| Open-loop voltage gain | AOL | 83 | dB | RL=2KΩ, Vo=0.15V to 4.85V, -40C to 125C | 9 | ||
| Open-loop voltage gain | AOL | 98 | 106 | dB | RL=10KΩ, Vo=0.05V to 4.95V, 25C | 9 | |
| Open-loop voltage gain | AOL | 85 | dB | RL=10KΩ, Vo=0.05V to 4.95V, -40C to 125C | 9 | ||
| Output swing from rail | 40 | mV | RL=2KΩ, 25C | 9 | |||
| Output swing from rail | 7 | mV | RL=10KΩ, 25C | 9 | |||
| Output short-circuit current | Iout | 50 | mA | 25C | 9 | ||
| Slew rate | SR | 3.7 | V/us | 25C | 9 | ||
| Gain-bandwidth product | GBP | 7 | MHz | 25C | 9 | ||
| Phase margin | PM | 64 | ° | 25C | 9 | ||
| Setting time to 0.1% | ts | 0.5 | us | 0.1% | 9 | ||
| Overload recovery time | 0.5 | us | VIN·Gain≥VS | 9 | |||
| Input voltage noise density | en | 11 | nV/√Hz | f = 1KHz, 25C | 9 | ||
| Input voltage noise density | en | 7.5 | nV/√Hz | f = 10KHz, 25C | 9 | ||
| Thermal resistance, junction-to-ambient | RϴJA | 273.8 | °C/W | SOT23-5 package | 6 | ||
| Thermal resistance, junction-to-case (top) | RϴJC(top) | 126.8 | °C/W | SOT23-5 package | 6 | ||
| Thermal resistance, junction-to-board | RϴJB | 85.9 | °C/W | SOT23-5 package | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 10.9 | °C/W | SOT23-5 package | 6 | ||
| Junction-to-board characterization parameter | ΨJB | 84.9 | °C/W | SOT23-5 package | 6 |
CAD (KiCad official)
- Symbol:
RS621KXF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
rs621kxf-etched.step/rs621kxf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs621kxf.step/rs621kxf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (27 pp, sha256
629551fe8d903c10, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).