Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS621KXF

Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5

RS621KXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, rail-to-rail swing, with output terminals diode-clamped to the supply rails and current limited to ±70mA or less beyond the rails.
2 V- power_in Negative (lowest) power supply; single-supply range 2.5V to 5.5V between V+ and V-.
3 +IN input Positive (noninverting) input, rail-to-rail common-mode range -0.1V to 5.6V at Vs=5.5V, diode-clamped to the rails with input current limited to 10mA.
4 -IN input Negative (inverting) input, rail-to-rail, diode-clamped to the supply rails with input current limited to 10mA.
5 V+ power_in Positive (highest) power supply, 2.5V to 5.5V recommended (7V absolute maximum), with a 0.1uF capacitor placed closely across the supply pins.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, Vs=(V+)-(V-) Vs 7 V 6
Signal input pin voltage -0.5 0.5 V Printed as (V-)-0.5 V min and (V+)+0.5 V max; offsets from supply rails 6
Signal output pin voltage -0.5 0.5 V Printed as (V-)-0.5 V min and (V+)+0.5 V max; offsets from supply rails 6
Signal input pin current -10 10 mA 6
Signal output pin current -70 70 mA 6
Operating range, free-air temperature TA TA -40 125 °C 6
Junction temperature TJ TJ 150 °C 6
Storage temperature Tstg Tstg -65 150 °C 6
ESD Human-body model (HBM) V(ESD) -5000 5000 V Human-body model (HBM); printed ±5000 V 6
ESD Machine Model (MM) V(ESD) -400 400 V Machine Model (MM); printed ±400 V 6
Supply voltage, single-supply Vs 2.5 5.5 V Single-supply 6
Supply voltage, dual-supply Vs 1.25 2.75 V Dual-supply; printed ±1.25 V in MIN column and ±2.75 V in MAX column 6
Operating voltage range Vs 2.5 5.5 V 25C 9
Quiescent current per amplifier IQ 600 800 uA 25C 9
Power-supply rejection ratio PSRR 78 93 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, 25C 9
Power-supply rejection ratio PSRR 72 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, -40C to 125C 9
Input offset voltage Vos -3 0.7 3 mV 25C 9
Input offset voltage average drift Vos TC 2 uV/C -40C to 125C 9
Input bias current IB 1 10 pA 25C; printed ±1 typ and ±10 max 9
Input offset current Ios 1 10 pA 25C; printed ±1 typ and ±10 max 9
Common-mode voltage range Vcm -0.1 5.6 V Vs=5.5V, 25C 9
Common-mode rejection ratio CMRR 74 92 dB Vs=5.5V, Vcm=-0.1V to 4V, 25C 9
Common-mode rejection ratio CMRR 68 dB Vs=5.5V, Vcm=-0.1V to 4V, -40C to 125C 9
Common-mode rejection ratio CMRR 62 83 dB Vs=5.5V, Vcm=-0.1V to 5.6V, 25C 9
Common-mode rejection ratio CMRR 60 dB Vs=5.5V, Vcm=-0.1V to 5.6V, -40C to 125C 9
Open-loop voltage gain AOL 96 102 dB RL=2KΩ, Vo=0.15V to 4.85V, 25C 9
Open-loop voltage gain AOL 83 dB RL=2KΩ, Vo=0.15V to 4.85V, -40C to 125C 9
Open-loop voltage gain AOL 98 106 dB RL=10KΩ, Vo=0.05V to 4.95V, 25C 9
Open-loop voltage gain AOL 85 dB RL=10KΩ, Vo=0.05V to 4.95V, -40C to 125C 9
Output swing from rail 40 mV RL=2KΩ, 25C 9
Output swing from rail 7 mV RL=10KΩ, 25C 9
Output short-circuit current Iout 50 mA 25C 9
Slew rate SR 3.7 V/us 25C 9
Gain-bandwidth product GBP 7 MHz 25C 9
Phase margin PM 64 ° 25C 9
Setting time to 0.1% ts 0.5 us 0.1% 9
Overload recovery time 0.5 us VIN·Gain≥VS 9
Input voltage noise density en 11 nV/√Hz f = 1KHz, 25C 9
Input voltage noise density en 7.5 nV/√Hz f = 10KHz, 25C 9
Thermal resistance, junction-to-ambient RϴJA 273.8 °C/W SOT23-5 package 6
Thermal resistance, junction-to-case (top) RϴJC(top) 126.8 °C/W SOT23-5 package 6
Thermal resistance, junction-to-board RϴJB 85.9 °C/W SOT23-5 package 6
Junction-to-top characterization parameter ΨJT 10.9 °C/W SOT23-5 package 6
Junction-to-board characterization parameter ΨJB 84.9 °C/W SOT23-5 package 6

CAD (KiCad official)

  • Symbol: RS621KXF
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: rs621kxf-etched.step / rs621kxf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs621kxf.step / rs621kxf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (27 pp, sha256 629551fe8d903c10, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF