main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs393xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rs393xk: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rs393xk: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray
rs393xk-etched.fit.json rs393xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs393xk-etched.glb rs393xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
rs393xk-etched.step rs393xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
rs393xk-hero.glb rs393xk: hero from the plain model · Ray
rs393xk-hero.overlay.json rs393xk: hero from the plain model · Ray
rs393xk.glb Publish 0.1.0 · Ray
rs393xk.kicad_mod Publish 0.1.0 · Ray
rs393xk.kicad_sym Publish 0.1.0 · Ray
rs393xk.lbr Publish 0.1.0 · Ray
rs393xk.step Publish 0.1.0 · Ray

RS393XK

Jiangsu RUNIC Tech · Comparators · SOP-8

RS393XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Open-drain output of channel A. Requires external pull-up resistor (RPU typ. 5.1kΩ). VOL typ. 150mV at IO≤4mA; output pull-up voltage range up to 5.6V.
2 -INA input Inverting input, channel A. Input common-mode range (V-)-0.1 to (V+)+0.1 V; input bias current typ. 1 pA.
3 +INA input Noninverting input, channel A. Input common-mode range includes ground; input bias current typ. 1 pA.
4 V- power_in Negative (lowest) power supply. Typically GND for single-supply operation (1.8V to 5.5V) or -2.75V for dual-supply operation.
5 +INB input Noninverting input, channel B. Input common-mode range includes ground; input bias current typ. 1 pA.
6 -INB input Inverting input, channel B. Input common-mode range (V-)-0.1 to (V+)+0.1 V; input bias current typ. 1 pA.
7 OUTB output Open-drain output of channel B. Requires external pull-up resistor (RPU typ. 5.1kΩ). VOL typ. 150mV at IO≤4mA; output pull-up voltage range up to 5.6V.
8 V+ power_in Positive (highest) power supply. Operating range 1.8V to 5.5V (single-supply); absolute maximum 7V.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS393XK
  • RS393XKXF
  • RS393XKXP
  • RS393XKXQ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range Vs 1.8 5.5 V 6
Quiescent Current/per channel IQ 50 100 μA 6
Input offset voltage VOS -3.5 0.6 3.5 mV 6
Input Bias Current IB 1 10 pA 6
Input Offset Current IOS 1 10 pA 6
Common-Mode Voltage Range VCM -0.1 0.1 V TA = –40°C to 85°C; min referenced to (V-), max referenced to (V+) 6
Saturation Voltage VSAT 150 350 mV Io≤4mA 6
Output Leakage Current ILEAK 0.01 10 nA 6
Supply voltage, single-supply Vs 1.8 5.5 V Single-supply 4
Supply voltage, dual-supply Vs 0.9 2.75 V Dual-supply, ± rails (printed ±0.9 / ±2.75) 4
Supply voltage Vs 7 V Vs=(V+)-(V-) 4
Input pin voltage (IN+, IN-) -0.3 0.3 V min referenced to (V-), max referenced to (V+) 4
Signal output pin voltage -0.3 0.3 V min referenced to (V-), max referenced to (V+) 4
Signal input pin current (IN+, IN-) -10 10 mA 4
Signal output pin current -55 55 mA 4
Operating range, free-air temperature TA -40 85 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human-body model V(ESD) 2000 V HBM, ANSI/ESDA/JEDEC JS-001, all pins 4
Electrostatic discharge, charged-device model V(ESD) 1000 V CDM, JESD22-C101, all pins 4
Output Current (sinking) IO 27 mA VO≤1.5V 6
Power-Supply Rejection Ratio PSRR 70 dB Vs=1.8V to 5.5V, VCM=(V)+0.5V 6
Common-mode rejection ratio (datasheet label reads Power-Supply Rejection Ratio) CMRR 70 dB VCM =-0.1 to 5.6V 6
Output Pull-up Voltage Range VOH 5.6 V 6
Input Offset Voltage Drift ΔVos/ΔT 0.5 μV/°C VCM =Vs/2, -40°C ≤ TA ≤ 85°C 6
Propagation Delay H To L TPHL 205 ns RPU=5.1KΩ, Overdrive =10mV 6
Propagation Delay H To L TPHL 185 ns RPU=5.1KΩ, Overdrive =100mV 6
Propagation Delay L To H TPLH 660 ns RPU=5.1KΩ, Overdrive =10mV 6
Propagation Delay L To H TPLH 700 ns RPU=5.1KΩ, Overdrive =100mV 6
Fall Time TF 42 ns RPU=5.1KΩ, Overdrive =100mV 6
Junction-to-ambient thermal resistance (SOIC-8) RϴJA 116 °C/W 5
Junction-to-case(top) thermal resistance (SOIC-8) RϴJC(top) 60 °C/W 5
Junction-to-board thermal resistance (SOIC-8) RϴJB 56 °C/W 5
Junction-to-top characterization parameter (SOIC-8) ѰJT 12.8 °C/W 5
Junction-to-board characterization parameter (SOIC-8) ѰJB 98.3 °C/W 5

CAD (KiCad official)

  • Symbol: RS393XK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs393xk-etched.step / rs393xk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs393xk.step / rs393xk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (16 pp, sha256 92fbba6bb4adde8a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF