3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS393XK
Jiangsu RUNIC Tech · Comparators · SOP-8
RS393XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Open-drain output of channel A. Requires external pull-up resistor (RPU typ. 5.1kΩ). VOL typ. 150mV at IO≤4mA; output pull-up voltage range up to 5.6V. |
| 2 | -INA | input | Inverting input, channel A. Input common-mode range (V-)-0.1 to (V+)+0.1 V; input bias current typ. 1 pA. |
| 3 | +INA | input | Noninverting input, channel A. Input common-mode range includes ground; input bias current typ. 1 pA. |
| 4 | V- | power_in | Negative (lowest) power supply. Typically GND for single-supply operation (1.8V to 5.5V) or -2.75V for dual-supply operation. |
| 5 | +INB | input | Noninverting input, channel B. Input common-mode range includes ground; input bias current typ. 1 pA. |
| 6 | -INB | input | Inverting input, channel B. Input common-mode range (V-)-0.1 to (V+)+0.1 V; input bias current typ. 1 pA. |
| 7 | OUTB | output | Open-drain output of channel B. Requires external pull-up resistor (RPU typ. 5.1kΩ). VOL typ. 150mV at IO≤4mA; output pull-up voltage range up to 5.6V. |
| 8 | V+ | power_in | Positive (highest) power supply. Operating range 1.8V to 5.5V (single-supply); absolute maximum 7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
RS393XKRS393XKXFRS393XKXPRS393XKXQ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | Vs | 1.8 | 5.5 | V | 6 | ||
| Quiescent Current/per channel | IQ | 50 | 100 | μA | 6 | ||
| Input offset voltage | VOS | -3.5 | 0.6 | 3.5 | mV | 6 | |
| Input Bias Current | IB | 1 | 10 | pA | 6 | ||
| Input Offset Current | IOS | 1 | 10 | pA | 6 | ||
| Common-Mode Voltage Range | VCM | -0.1 | 0.1 | V | TA = –40°C to 85°C; min referenced to (V-), max referenced to (V+) | 6 | |
| Saturation Voltage | VSAT | 150 | 350 | mV | Io≤4mA | 6 | |
| Output Leakage Current | ILEAK | 0.01 | 10 | nA | 6 | ||
| Supply voltage, single-supply | Vs | 1.8 | 5.5 | V | Single-supply | 4 | |
| Supply voltage, dual-supply | Vs | 0.9 | 2.75 | V | Dual-supply, ± rails (printed ±0.9 / ±2.75) | 4 | |
| Supply voltage | Vs | 7 | V | Vs=(V+)-(V-) | 4 | ||
| Input pin voltage (IN+, IN-) | -0.3 | 0.3 | V | min referenced to (V-), max referenced to (V+) | 4 | ||
| Signal output pin voltage | -0.3 | 0.3 | V | min referenced to (V-), max referenced to (V+) | 4 | ||
| Signal input pin current (IN+, IN-) | -10 | 10 | mA | 4 | |||
| Signal output pin current | -55 | 55 | mA | 4 | |||
| Operating range, free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human-body model | V(ESD) | 2000 | V | HBM, ANSI/ESDA/JEDEC JS-001, all pins | 4 | ||
| Electrostatic discharge, charged-device model | V(ESD) | 1000 | V | CDM, JESD22-C101, all pins | 4 | ||
| Output Current (sinking) | IO | 27 | mA | VO≤1.5V | 6 | ||
| Power-Supply Rejection Ratio | PSRR | 70 | dB | Vs=1.8V to 5.5V, VCM=(V)+0.5V | 6 | ||
| Common-mode rejection ratio (datasheet label reads Power-Supply Rejection Ratio) | CMRR | 70 | dB | VCM =-0.1 to 5.6V | 6 | ||
| Output Pull-up Voltage Range | VOH | 5.6 | V | 6 | |||
| Input Offset Voltage Drift | ΔVos/ΔT | 0.5 | μV/°C | VCM =Vs/2, -40°C ≤ TA ≤ 85°C | 6 | ||
| Propagation Delay H To L | TPHL | 205 | ns | RPU=5.1KΩ, Overdrive =10mV | 6 | ||
| Propagation Delay H To L | TPHL | 185 | ns | RPU=5.1KΩ, Overdrive =100mV | 6 | ||
| Propagation Delay L To H | TPLH | 660 | ns | RPU=5.1KΩ, Overdrive =10mV | 6 | ||
| Propagation Delay L To H | TPLH | 700 | ns | RPU=5.1KΩ, Overdrive =100mV | 6 | ||
| Fall Time | TF | 42 | ns | RPU=5.1KΩ, Overdrive =100mV | 6 | ||
| Junction-to-ambient thermal resistance (SOIC-8) | RϴJA | 116 | °C/W | 5 | |||
| Junction-to-case(top) thermal resistance (SOIC-8) | RϴJC(top) | 60 | °C/W | 5 | |||
| Junction-to-board thermal resistance (SOIC-8) | RϴJB | 56 | °C/W | 5 | |||
| Junction-to-top characterization parameter (SOIC-8) | ѰJT | 12.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter (SOIC-8) | ѰJB | 98.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
RS393XK - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs393xk-etched.step/rs393xk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs393xk.step/rs393xk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (16 pp, sha256
92fbba6bb4adde8a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).