main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rs1g79xc5: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
rs1g79xc5-etched.glb Publish 0.1.0 · Ray
rs1g79xc5-etched.step rs1g79xc5: factory component page (tier=lcsc) · Ray
rs1g79xc5-hero.glb rs1g79xc5: hero GLB from the etched model (keeps the MPN mark) · Ray
rs1g79xc5-hero.overlay.json Publish 0.1.0 · Ray
rs1g79xc5.glb Publish 0.1.0 · Ray
rs1g79xc5.kicad_mod Publish 0.1.0 · Ray
rs1g79xc5.kicad_sym Publish 0.1.0 · Ray
rs1g79xc5.lbr Publish 0.1.0 · Ray
rs1g79xc5.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

RS1G79XC5

Jiangsu RUNIC Tech · Flip Flops · SC-70-6

RS1G79XC5 from Jiangsu RUNIC Tech, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D input Data input whose level is transferred to Q on the positive-going edge of CP when the setup-time requirement is met, with inputs accepting voltages up to 5.5 V.
2 CP input Positive-edge clock input that triggers the transfer of D to Q, with switching characteristics specified up to fmax of 155 MHz.
3 GND power_in Ground reference for the device.
4 Q output Flip-flop output with high drive of ±24 mA at VCC = 3.0 V, which holds its previous state while CP is low and is protected against backdrive via the Ioff feature.
5 VCC power_in Supply voltage with a recommended operating range of 1.65 V to 5.5 V, and a 0.1 µF bypass capacitor is recommended close to this pin.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SC-70-6
Category Logic ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.65 5.5 V Operating 7
High-level input voltage VIH 1.7 V VCC=2.3V to 2.7V 7
High-level input voltage VIH 2 V VCC=3V to 3.6V 7
Low-level input voltage VIL 0.7 V VCC=2.3V to 2.7V 7
Low-level input voltage VIL 0.8 V VCC=3V to 3.6V 7
Input voltage VI 0 5.5 V 7
Output voltage VO 0 V 7
High-level output current IOH -4 mA VCC=1.65V 7
High-level output current IOH -8 mA VCC=2.3V 7
High-level output current IOH -16 mA VCC=3V 7
High-level output current IOH -32 mA VCC=4.5V 7
Low-level output current IOL 4 mA VCC=1.65V 7
Low-level output current IOL 8 mA VCC=2.3V 7
Low-level output current IOL 16 mA VCC=3V 7
Low-level output current IOL 32 mA VCC=4.5V 7
Input transition rise or fall rate Δt/Δv 20 ns/V VCC=1.8V±0.15V, 2.5V±0.2V 7
Input transition rise or fall rate Δt/Δv 10 ns/V VCC=3.3V±0.3V 7
Input transition rise or fall rate Δt/Δv 5 ns/V VCC=5V±0.5V 7
Operating temperature TA -40 125 °C 7
Supply voltage range VCC -0.5 6.5 V 6
Input voltage range VI -0.5 6.5 V 6
Voltage range applied to any output in the high-impedance or power-off state VO -0.5 6.5 V High-impedance or power-off state 6
Voltage range applied to any output in the high or low state VO -0.5 V High or low state 6
Input clamp current IIK -50 mA VI<0 6
Output clamp current IOK -50 mA VO<0 6
Continuous output current IO -50 50 mA 6
Continuous current through VCC or GND -100 100 mA 6
Junction temperature TJ -65 150 °C 6
Storage temperature Tstg -65 150 °C 6
High-level output voltage VOH 1.2 V IOH = -4mA, VCC=1.65V 8
High-level output voltage VOH 1.9 V IOH = -8mA, VCC=2.3V 8
High-level output voltage VOH 2.4 V IOH = -16mA, VCC=3V 8
High-level output voltage VOH 2.3 V IOH = -24mA, VCC=3V 8
High-level output voltage VOH 3.8 V IOH = -32mA, VCC=4.5V 8
Low-level output voltage VOL 0.1 V IOL = 100µA, VCC=1.65V to 5.5V 8
Low-level output voltage VOL 0.45 V IOL = 4mA, VCC=1.65V 8
Low-level output voltage VOL 0.3 V IOL = 8mA, VCC=2.3V 8
Low-level output voltage VOL 0.4 V IOL = 16mA, VCC=3V 8
Low-level output voltage VOL 0.55 V IOL = 24mA, VCC=3V 8
Input leakage current II -1 0.1 1 µA All inputs VI=5.5V or GND, VCC 0V to 5.5V, +25C 8
Input leakage current II -5 5 µA All inputs VI=5.5V or GND, VCC 0V to 5.5V, Full 8
Power-off leakage current Ioff -1 0.1 1 µA VI or VO=5.5V, VCC=0, +25C 8
Power-off leakage current Ioff -10 10 µA VI or VO=5.5V, VCC=0, Full 8
Quiescent supply current ICC 0.1 1 µA VI=5.5V or GND, IO=0, VCC=1.65V to 5.5V, +25C 8
Quiescent supply current ICC 10 µA VI=5.5V or GND, IO=0, VCC=1.65V to 5.5V, Full 8
Additional quiescent supply current ΔICC 500 µA One input at VCC-0.6V, other inputs at VCC or GND, VCC=3V to 5.5V, Full 8
Clock frequency fclock 30 MHz VCC=1.8V±0.15V 9
Clock frequency fclock 65 MHz VCC=2.5V±0.2V 9
Clock frequency fclock 100 MHz VCC=3.3V±0.3V 9
Clock frequency fclock 155 MHz VCC=5V±0.5V 9
Propagation delay CP to Q tpd 6 25 40 ns VCC=1.8V±0.15V, CL=30pF, RL=1kΩ, FULL 9
Propagation delay CP to Q tpd 4.8 20 32.5 ns VCC=2V±0.15V, CL=30pF, RL=1kΩ, FULL 9
Propagation delay CP to Q tpd 3 11.5 19 ns VCC=2.5V±0.2V, CL=30pF, RL=500Ω, FULL 9
Propagation delay CP to Q tpd 2.6 9 14.5 ns VCC=3.3V±0.3V, CL=50pF, RL=500Ω, FULL 9
Propagation delay CP to Q tpd 1.6 7.5 12 ns VCC=5V±0.5V, CL=50pF, RL=500Ω, FULL 9
Thermal impedance, junction to ambient θJA 380 °C/W SC70-5 package, per JESD-51 6
Input capacitance Ci 4 pF VI = VCC or GND, VCC=3.3V, +25C 8

CAD (KiCad official)

  • Symbol: RS1G79XC5
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: rs1g79xc5-etched.step / rs1g79xc5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs1g79xc5.step / rs1g79xc5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (17 pp, sha256 ae028f3a5949456b, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF