3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS1G79XC5
Jiangsu RUNIC Tech · Flip Flops · SC-70-6
RS1G79XC5 from Jiangsu RUNIC Tech, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | Data input whose level is transferred to Q on the positive-going edge of CP when the setup-time requirement is met, with inputs accepting voltages up to 5.5 V. |
| 2 | CP | input | Positive-edge clock input that triggers the transfer of D to Q, with switching characteristics specified up to fmax of 155 MHz. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Q | output | Flip-flop output with high drive of ±24 mA at VCC = 3.0 V, which holds its previous state while CP is low and is protected against backdrive via the Ioff feature. |
| 5 | VCC | power_in | Supply voltage with a recommended operating range of 1.65 V to 5.5 V, and a 0.1 µF bypass capacitor is recommended close to this pin. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SC-70-6 |
| Category | Logic ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.65 | 5.5 | V | Operating | 7 | |
| High-level input voltage | VIH | 1.7 | V | VCC=2.3V to 2.7V | 7 | ||
| High-level input voltage | VIH | 2 | V | VCC=3V to 3.6V | 7 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC=2.3V to 2.7V | 7 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC=3V to 3.6V | 7 | ||
| Input voltage | VI | 0 | 5.5 | V | 7 | ||
| Output voltage | VO | 0 | V | 7 | |||
| High-level output current | IOH | -4 | mA | VCC=1.65V | 7 | ||
| High-level output current | IOH | -8 | mA | VCC=2.3V | 7 | ||
| High-level output current | IOH | -16 | mA | VCC=3V | 7 | ||
| High-level output current | IOH | -32 | mA | VCC=4.5V | 7 | ||
| Low-level output current | IOL | 4 | mA | VCC=1.65V | 7 | ||
| Low-level output current | IOL | 8 | mA | VCC=2.3V | 7 | ||
| Low-level output current | IOL | 16 | mA | VCC=3V | 7 | ||
| Low-level output current | IOL | 32 | mA | VCC=4.5V | 7 | ||
| Input transition rise or fall rate | Δt/Δv | 20 | ns/V | VCC=1.8V±0.15V, 2.5V±0.2V | 7 | ||
| Input transition rise or fall rate | Δt/Δv | 10 | ns/V | VCC=3.3V±0.3V | 7 | ||
| Input transition rise or fall rate | Δt/Δv | 5 | ns/V | VCC=5V±0.5V | 7 | ||
| Operating temperature | TA | -40 | 125 | °C | 7 | ||
| Supply voltage range | VCC | -0.5 | 6.5 | V | 6 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | 6 | ||
| Voltage range applied to any output in the high-impedance or power-off state | VO | -0.5 | 6.5 | V | High-impedance or power-off state | 6 | |
| Voltage range applied to any output in the high or low state | VO | -0.5 | V | High or low state | 6 | ||
| Input clamp current | IIK | -50 | mA | VI<0 | 6 | ||
| Output clamp current | IOK | -50 | mA | VO<0 | 6 | ||
| Continuous output current | IO | -50 | 50 | mA | 6 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 6 | |||
| Junction temperature | TJ | -65 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| High-level output voltage | VOH | 1.2 | V | IOH = -4mA, VCC=1.65V | 8 | ||
| High-level output voltage | VOH | 1.9 | V | IOH = -8mA, VCC=2.3V | 8 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -16mA, VCC=3V | 8 | ||
| High-level output voltage | VOH | 2.3 | V | IOH = -24mA, VCC=3V | 8 | ||
| High-level output voltage | VOH | 3.8 | V | IOH = -32mA, VCC=4.5V | 8 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 100µA, VCC=1.65V to 5.5V | 8 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 4mA, VCC=1.65V | 8 | ||
| Low-level output voltage | VOL | 0.3 | V | IOL = 8mA, VCC=2.3V | 8 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 16mA, VCC=3V | 8 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL = 24mA, VCC=3V | 8 | ||
| Input leakage current | II | -1 | 0.1 | 1 | µA | All inputs VI=5.5V or GND, VCC 0V to 5.5V, +25C | 8 |
| Input leakage current | II | -5 | 5 | µA | All inputs VI=5.5V or GND, VCC 0V to 5.5V, Full | 8 | |
| Power-off leakage current | Ioff | -1 | 0.1 | 1 | µA | VI or VO=5.5V, VCC=0, +25C | 8 |
| Power-off leakage current | Ioff | -10 | 10 | µA | VI or VO=5.5V, VCC=0, Full | 8 | |
| Quiescent supply current | ICC | 0.1 | 1 | µA | VI=5.5V or GND, IO=0, VCC=1.65V to 5.5V, +25C | 8 | |
| Quiescent supply current | ICC | 10 | µA | VI=5.5V or GND, IO=0, VCC=1.65V to 5.5V, Full | 8 | ||
| Additional quiescent supply current | ΔICC | 500 | µA | One input at VCC-0.6V, other inputs at VCC or GND, VCC=3V to 5.5V, Full | 8 | ||
| Clock frequency | fclock | 30 | MHz | VCC=1.8V±0.15V | 9 | ||
| Clock frequency | fclock | 65 | MHz | VCC=2.5V±0.2V | 9 | ||
| Clock frequency | fclock | 100 | MHz | VCC=3.3V±0.3V | 9 | ||
| Clock frequency | fclock | 155 | MHz | VCC=5V±0.5V | 9 | ||
| Propagation delay CP to Q | tpd | 6 | 25 | 40 | ns | VCC=1.8V±0.15V, CL=30pF, RL=1kΩ, FULL | 9 |
| Propagation delay CP to Q | tpd | 4.8 | 20 | 32.5 | ns | VCC=2V±0.15V, CL=30pF, RL=1kΩ, FULL | 9 |
| Propagation delay CP to Q | tpd | 3 | 11.5 | 19 | ns | VCC=2.5V±0.2V, CL=30pF, RL=500Ω, FULL | 9 |
| Propagation delay CP to Q | tpd | 2.6 | 9 | 14.5 | ns | VCC=3.3V±0.3V, CL=50pF, RL=500Ω, FULL | 9 |
| Propagation delay CP to Q | tpd | 1.6 | 7.5 | 12 | ns | VCC=5V±0.5V, CL=50pF, RL=500Ω, FULL | 9 |
| Thermal impedance, junction to ambient | θJA | 380 | °C/W | SC70-5 package, per JESD-51 | 6 | ||
| Input capacitance | Ci | 4 | pF | VI = VCC or GND, VCC=3.3V, +25C | 8 |
CAD (KiCad official)
- Symbol:
RS1G79XC5 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
rs1g79xc5-etched.step/rs1g79xc5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs1g79xc5.step/rs1g79xc5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (17 pp, sha256
ae028f3a5949456b, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).