RP2350A

{
 "schema": "adom/verification@1",
 "part": "RP2350A",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "60 of 61 pins described from the datasheet (adom-ds2sf, page-cited)",
     "result": "note"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/rp2350a-datasheet.pdf"
    }
   ],
   "files": {
    "rp2350a.kicad_sym": "7b5a16003788ce8deb7da04247c00704116056150a857b1814274498ece5f67f",
    "rp2350a.kicad_mod": "99bd6e3b6cfc861cceb47298adff126a77b442cf0b83094ca4fdcc59bee15cd8",
    "rp2350a.step": "6a022e055b042ab953db707db0a727f3f7982d1385b96e1682cf875faa8b442b"
   }
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "1 of 61 pins have no datasheet description yet (pins 25).",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "1 of 61 pins have no datasheet description yet (pins 25).",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 25: symbol \"SWD\" vs datasheet \"SWDIO\"",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Datasheet pins not matched to a symbol pin: SWDIO",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet pins not matched to a symbol pin: SWDIO",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Ray Kholodovsky's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against Raspberry Pi's RP2350 datasheet (build of 2026-10-01)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "All 61 pins match the datasheet pin table (section 14.8) by number and name; pin 25 renamed SWD -> SWDIO to the datasheet's spelling",
     "result": "pass"
    },
    {
     "text": "Pin 1 is IOVDD per the QFN-60 pinout figure and Raspberry Pi's KiCad symbol; the pin table lists 54 under both IOVDD and QSPI_IOVDD and omits 1, a typo in the table",
     "result": "note"
    },
    {
     "text": "Pin 24 SWCLK typed as an input (Digital In (FT)); it was an output",
     "result": "pass"
    },
    {
     "text": "Footprint vs package drawing (Figure 147): 60 pads at e = 0.400 mm, pad 0.2 x 0.8 mm over b = 0.18 and L = 0.40 mm terminals, exposed pad 3.4 x 3.4 mm (D2/E2 = 3.40), pin 1 top-left",
     "result": "pass"
    },
    {
     "text": "3D body 7.0 x 7.0 x 0.9 mm (D/E = 7 BSC, A max 0.90), Z-up, seated on z = 0, centred on the pads",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass; adom-lbr validate OK",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Raspberry Pi)",
     "href": "https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf"
    }
   ],
   "files": {
    "rp2350a.kicad_sym": "20b7fd9f7a707ca3849970d6d15a2269ecd6680fe262737977ebc43b463fad6d",
    "rp2350a.kicad_mod": "c42c1fefe3d353d52ff8388c8ed5c747e7d2ca867143da8140952b2c4e0c9091",
    "rp2350a.step": "6a022e055b042ab953db707db0a727f3f7982d1385b96e1682cf875faa8b442b"
   }
  }
 ]
}