component
RP2350A
Public Made by Adomby adom
Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
← Commit history
Publish 0.1.4
7 files changed
+124−110
package.json+82−84@@ -1,6 +1,6 @@ { "slug": "rp2350a",- "version": "0.1.3",+ "version": "0.1.4", "type": "component", "tags": [ "component",@@ -36,7 +36,7 @@ "pin_count": 61, "category": "Embedded Processors & Controllers", "subcategory": "Microcontrollers",- "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8562345067823054848",+ "datasheet": "https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf", "parts": { "symbol": "rp2350a.kicad_sym", "footprint": "rp2350a.kicad_mod",@@ -47,10 +47,10 @@ "lbr": "rp2350a.lbr" }, "distributor_links": {- "digikey": false,- "digikey_note": "2026-10-09: no exact-MPN listing for RP2350A found via the digikey API.",- "mouser": false,- "mouser_note": "2026-10-09: no exact-MPN listing for RP2350A found via the mouser API.",+ "digikey": "2648-SC1509-A4TR-ND",+ "digikey_note": "Raspberry Pi sells RP2350A under ordering code SC1509-A4 (A4 stepping, 7\" reel of 500); 13\" reel of 3400: 2648-SC1509(13)TR-ND. Checked 2026-10-27.",+ "mouser": "358-SC1509",+ "mouser_note": "Ordering code SC1509-A4 (7\" reel of 500); 13\" reel of 3400: 358-SC150913. Checked 2026-10-27.", "lcsc": { "part": "C42411118", "url": "https://www.lcsc.com/product-detail/C42411118.html"@@ -61,380 +61,377 @@ "number": "1", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1330]" }, { "number": "2", "name": "GPIO0", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Default drive 4 mA; programmable pull-up/pull-down, slew rate, Schmitt trigger. Reset state: pull-down. Muxable to SPI0_RX / UART0_TX / I2C0_SDA / PWM0_A / SIO / PIO0..2 / QMI_CS1n / USB OVCUR DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Default drive 4 mA; programmable pull-up/pull-down, slew rate, Schmitt trigger. Reset state: pull-down. Muxable to SPI0_RX / UART0_TX / I2C0_SDA / PWM0_A / SIO / PIO0..2 / QMI_CS1n / USB OVCUR DET. [datasheet p.1332]" }, { "number": "3", "name": "GPIO1", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART0_RX / I2C0_SCL / PWM0_B / SIO / PIO0..2 / TRACECLK / USB VBUS DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART0_RX / I2C0_SCL / PWM0_B / SIO / PIO0..2 / TRACECLK / USB VBUS DET. [datasheet p.1332]" }, { "number": "4", "name": "GPIO2", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART0_CTS / I2C1_SDA / PWM1_A / SIO / PIO0..2 / TRACEDATA0 / USB VBUS EN / UART0_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART0_CTS / I2C1_SDA / PWM1_A / SIO / PIO0..2 / TRACEDATA0 / USB VBUS EN / UART0_TX. [datasheet p.1332]" }, { "number": "5", "name": "GPIO3", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART0_RTS / I2C1_SCL / PWM1_B / SIO / PIO0..2 / TRACEDATA1 / USB OVCUR DET / UART0_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART0_RTS / I2C1_SCL / PWM1_B / SIO / PIO0..2 / TRACEDATA1 / USB OVCUR DET / UART0_RX. [datasheet p.1332]" }, { "number": "6", "name": "DVDD", "type": "power_in",- "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (also pins 23, 39). [datasheet p.1332]"+ "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (6, 23, 39). [datasheet p.1334]" }, { "number": "7", "name": "GPIO4", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_RX / UART1_TX / I2C0_SDA / PWM2_A / SIO / PIO0..2 / TRACEDATA2 / USB VBUS DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_RX / UART1_TX / I2C0_SDA / PWM2_A / SIO / PIO0..2 / TRACEDATA2 / USB VBUS DET. [datasheet p.1332]" }, { "number": "8", "name": "GPIO5", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART1_RX / I2C0_SCL / PWM2_B / SIO / PIO0..2 / TRACEDATA3 / USB VBUS EN. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART1_RX / I2C0_SCL / PWM2_B / SIO / PIO0..2 / TRACEDATA3 / USB VBUS EN. [datasheet p.1332]" }, { "number": "9", "name": "GPIO6", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART1_CTS / I2C1_SDA / PWM3_A / SIO / PIO0..2 / USB OVCUR DET / UART1_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART1_CTS / I2C1_SDA / PWM3_A / SIO / PIO0..2 / USB OVCUR DET / UART1_TX. [datasheet p.1332]" }, { "number": "10", "name": "GPIO7", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART1_RTS / I2C1_SCL / PWM3_B / SIO / PIO0..2 / USB VBUS DET / UART1_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART1_RTS / I2C1_SCL / PWM3_B / SIO / PIO0..2 / USB VBUS DET / UART1_RX. [datasheet p.1332]" }, { "number": "11", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1334]" }, { "number": "12", "name": "GPIO8", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_RX / UART1_TX / I2C0_SDA / PWM4_A / SIO / PIO0..2 / QMI_CS1n / USB VBUS EN. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_RX / UART1_TX / I2C0_SDA / PWM4_A / SIO / PIO0..2 / QMI_CS1n / USB VBUS EN. [datasheet p.1332]" }, { "number": "13", "name": "GPIO9", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_CSn / UART1_RX / I2C0_SCL / PWM4_B / SIO / PIO0..2 / USB OVCUR DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_CSn / UART1_RX / I2C0_SCL / PWM4_B / SIO / PIO0..2 / USB OVCUR DET. [datasheet p.1332]" }, { "number": "14", "name": "GPIO10", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_SCK / UART1_CTS / I2C1_SDA / PWM5_A / SIO / PIO0..2 / USB VBUS DET / UART1_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_SCK / UART1_CTS / I2C1_SDA / PWM5_A / SIO / PIO0..2 / USB VBUS DET / UART1_TX. [datasheet p.1332]" }, { "number": "15", "name": "GPIO11", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_TX / UART1_RTS / I2C1_SCL / PWM5_B / SIO / PIO0..2 / USB VBUS EN / UART1_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_TX / UART1_RTS / I2C1_SCL / PWM5_B / SIO / PIO0..2 / USB VBUS EN / UART1_RX. [datasheet p.1332]" }, { "number": "16", "name": "GPIO12", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_RX / UART0_TX / I2C0_SDA / PWM6_A / SIO / PIO0..2 / CLOCK GPIN0 / USB OVCUR DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_RX / UART0_TX / I2C0_SDA / PWM6_A / SIO / PIO0..2 / CLOCK GPIN0 / USB OVCUR DET. [datasheet p.1332]" }, { "number": "17", "name": "GPIO13", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_CSn / UART0_RX / I2C0_SCL / PWM6_B / SIO / PIO0..2 / CLOCK GPOUT0 / USB VBUS DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_CSn / UART0_RX / I2C0_SCL / PWM6_B / SIO / PIO0..2 / CLOCK GPOUT0 / USB VBUS DET. [datasheet p.1332]" }, { "number": "18", "name": "GPIO14", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_SCK / UART0_CTS / I2C1_SDA / PWM7_A / SIO / PIO0..2 / CLOCK GPIN1 / USB VBUS EN / UART0_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_SCK / UART0_CTS / I2C1_SDA / PWM7_A / SIO / PIO0..2 / CLOCK GPIN1 / USB VBUS EN / UART0_TX. [datasheet p.1332]" }, { "number": "19", "name": "GPIO15", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_TX / UART0_RTS / I2C1_SCL / PWM7_B / SIO / PIO0..2 / CLOCK GPOUT1 / USB OVCUR DET / UART0_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI1_TX / UART0_RTS / I2C1_SCL / PWM7_B / SIO / PIO0..2 / CLOCK GPOUT1 / USB OVCUR DET / UART0_RX. [datasheet p.1332]" }, { "number": "20", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1334]" }, { "number": "21", "name": "XIN", "type": "input",- "description": "Crystal oscillator input. Attach a crystal (typically 12 MHz for the stock USB bootloader) between XIN and XOUT with the recommended load capacitors; or drive XIN with a square-wave CMOS clock (0.65*IOVDD to IOVDD+0.3 V high) with XOUT left floating. XOSC input range 1-50 MHz. [datasheet p.1331]"+ "description": "Crystal oscillator input. Attach a crystal (typically 12 MHz for the stock USB bootloader) between XIN and XOUT with the recommended load capacitors; or drive XIN with a square-wave CMOS clock (0.65*IOVDD to IOVDD+0.3 V high) with XOUT left floating. XOSC input range 1-50 MHz. [datasheet p.1334]" }, { "number": "22", "name": "XOUT", "type": "passive",- "description": "Crystal oscillator output. Connect to the far side of the crystal with load capacitor to ground. Leave floating when XIN is driven by an external clock. [datasheet p.1331]"+ "description": "Crystal oscillator output. Connect to the far side of the crystal with load capacitor to ground. Leave floating when XIN is driven by an external clock. [datasheet p.1334]" }, { "number": "23", "name": "DVDD", "type": "power_in",- "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (also pins 23, 39). [datasheet p.1332]"+ "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (6, 23, 39). [datasheet p.1334]" }, { "number": "24", "name": "SWCLK",- "type": "output",- "description": "Serial Wire Debug clock input (Fault-Tolerant). Pull-up at reset. SWD operates reliably up to 50 MHz on-chip (external signal integrity may limit practical rate). [datasheet p.1331]"+ "type": "input",+ "description": "Serial Wire Debug clock input (Fault-Tolerant). Pull-up at reset. SWD operates reliably up to 50 MHz on-chip (external signal integrity may limit practical rate). [datasheet p.1334]" }, { "number": "25",- "name": "SWD",+ "name": "SWDIO", "type": "bidirectional",- "description": ""+ "description": "Serial Wire Debug data input/output (Fault-Tolerant). Pull-up at reset. Pairs with SWCLK for the SWD debug port; connect to the debug probe's SWDIO. [datasheet p.1334]" }, { "number": "26", "name": "RUN", "type": "input",- "description": "Global asynchronous active-low reset input (Fault-Tolerant). Drive low to hold chip in reset; release high to run. Pull-up at reset. If no external reset is needed, tie directly to IOVDD. [datasheet p.1331]"+ "description": "Global asynchronous active-low reset input (Fault-Tolerant). Drive low to hold chip in reset; release high to run. Pull-up at reset. If no external reset is needed, tie directly to IOVDD. [datasheet p.1334]" }, { "number": "27", "name": "GPIO16", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_RX / UART0_TX / I2C0_SDA / PWM0_A / SIO / PIO0..2 / USB VBUS DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_RX / UART0_TX / I2C0_SDA / PWM0_A / SIO / PIO0..2 / USB VBUS DET. [datasheet p.1332]" }, { "number": "28", "name": "GPIO17", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_CSn / UART0_RX / I2C0_SCL / PWM0_B / SIO / PIO0..2 / USB VBUS EN. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_CSn / UART0_RX / I2C0_SCL / PWM0_B / SIO / PIO0..2 / USB VBUS EN. [datasheet p.1332]" }, { "number": "29", "name": "GPIO18", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_SCK / UART0_CTS / I2C1_SDA / PWM1_A / SIO / PIO0..2 / USB OVCUR DET / UART0_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_SCK / UART0_CTS / I2C1_SDA / PWM1_A / SIO / PIO0..2 / USB OVCUR DET / UART0_TX. [datasheet p.1332]" }, { "number": "30", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1334]" }, { "number": "31", "name": "GPIO19", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_TX / UART0_RTS / I2C1_SCL / PWM1_B / SIO / PIO0..2 / QMI_CS1n / USB VBUS DET / UART0_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to HSTX / SPI0_TX / UART0_RTS / I2C1_SCL / PWM1_B / SIO / PIO0..2 / QMI_CS1n / USB VBUS DET / UART0_RX. [datasheet p.1332]" }, { "number": "32", "name": "GPIO20", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_RX / UART1_TX / I2C0_SDA / PWM2_A / SIO / PIO0..2 / CLOCK GPIN0 / USB VBUS EN. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_RX / UART1_TX / I2C0_SDA / PWM2_A / SIO / PIO0..2 / CLOCK GPIN0 / USB VBUS EN. [datasheet p.1332]" }, { "number": "33", "name": "GPIO21", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART1_RX / I2C0_SCL / PWM2_B / SIO / PIO0..2 / CLOCK GPOUT0 / USB OVCUR DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_CSn / UART1_RX / I2C0_SCL / PWM2_B / SIO / PIO0..2 / CLOCK GPOUT0 / USB OVCUR DET. [datasheet p.1332]" }, { "number": "34", "name": "GPIO22", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART1_CTS / I2C1_SDA / PWM3_A / SIO / PIO0..2 / CLOCK GPIN1 / USB VBUS DET / UART1_TX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_SCK / UART1_CTS / I2C1_SDA / PWM3_A / SIO / PIO0..2 / CLOCK GPIN1 / USB VBUS DET / UART1_TX. [datasheet p.1332]" }, { "number": "35", "name": "GPIO23", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART1_RTS / I2C1_SCL / PWM3_B / SIO / PIO0..2 / CLOCK GPOUT1 / USB VBUS EN / UART1_RX. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI0_TX / UART1_RTS / I2C1_SCL / PWM3_B / SIO / PIO0..2 / CLOCK GPOUT1 / USB VBUS EN / UART1_RX. [datasheet p.1332]" }, { "number": "36", "name": "GPIO24", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_RX / UART1_TX / I2C0_SDA / PWM4_A / SIO / PIO0..2 / CLOCK GPOUT2 / USB OVCUR DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_RX / UART1_TX / I2C0_SDA / PWM4_A / SIO / PIO0..2 / CLOCK GPOUT2 / USB OVCUR DET. [datasheet p.1332]" }, { "number": "37", "name": "GPIO25", "type": "bidirectional",- "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_CSn / UART1_RX / I2C0_SCL / PWM4_B / SIO / PIO0..2 / CLOCK GPOUT3 / USB VBUS DET. [datasheet p.1328]"+ "description": "General-purpose Fault-Tolerant digital IO (Bank 0). Reset state: pull-down. Muxable to SPI1_CSn / UART1_RX / I2C0_SCL / PWM4_B / SIO / PIO0..2 / CLOCK GPOUT3 / USB VBUS DET. [datasheet p.1332]" }, { "number": "38", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1334]" }, { "number": "39", "name": "DVDD", "type": "power_in",- "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (also pins 23, 39). [datasheet p.1332]"+ "description": "Digital core supply, nominal 1.1 V. Must be driven externally — either from the on-chip VREG output (VREG_LX filtered to DVDD) or from an off-chip 1.1 V rail. One of three DVDD pins (6, 23, 39). [datasheet p.1334]" }, { "number": "40", "name": "GPIO26_ADC0", "type": "bidirectional",- "description": "GPIO26 or ADC channel 0 input. Digital IO + Analogue input domain (IOVDD / ADC_AVDD). Full ADC range 0 V to ADC_AVDD (nominal 3.3 V). 12-bit SAR ADC, 100 kΩ input impedance; keep input ≤ IOVDD to avoid ESD-diode leakage. [datasheet p.1328]"+ "description": "GPIO26 or ADC channel 0 input. Digital IO + Analogue input domain (IOVDD / ADC_AVDD). Full ADC range 0 V to ADC_AVDD (nominal 3.3 V). 12-bit SAR ADC, 100 kΩ input impedance; keep input ≤ IOVDD to avoid ESD-diode leakage. [datasheet p.1332]" }, { "number": "41", "name": "GPIO27_ADC1", "type": "bidirectional",- "description": "GPIO27 or ADC channel 1 input. Digital IO + Analogue input. Same characteristics as ADC0: 12-bit, 0 V to ADC_AVDD. [datasheet p.1328]"+ "description": "GPIO27 or ADC channel 1 input. Digital IO + Analogue input. Same characteristics as ADC0: 12-bit, 0 V to ADC_AVDD. [datasheet p.1332]" }, { "number": "42", "name": "GPIO28_ADC2", "type": "bidirectional",- "description": "GPIO28 or ADC channel 2 input. Digital IO + Analogue input. 12-bit SAR, 0 V to ADC_AVDD. [datasheet p.1328]"+ "description": "GPIO28 or ADC channel 2 input. Digital IO + Analogue input. 12-bit SAR, 0 V to ADC_AVDD. [datasheet p.1332]" }, { "number": "43", "name": "GPIO29_ADC3", "type": "bidirectional",- "description": "GPIO29 or ADC channel 3 input. Digital IO + Analogue input. 12-bit SAR, 0 V to ADC_AVDD. [datasheet p.1328]"+ "description": "GPIO29 or ADC channel 3 input. Digital IO + Analogue input. 12-bit SAR, 0 V to ADC_AVDD. [datasheet p.1333]" }, { "number": "44", "name": "ADC_AVDD", "type": "power_in",- "description": "Analogue supply for the ADC and reference. Nominal 3.3 V. Must be powered whenever any ADC input is used. Low-noise bulk/decoupling recommended; can share source with VREG_AVDD/IOVDD at 3.3 V with filtering. [datasheet p.1332]"+ "description": "Analogue supply for the ADC and reference. Nominal 3.3 V. Must be powered whenever any ADC input is used. Low-noise bulk/decoupling recommended; can share source with VREG_AVDD/IOVDD at 3.3 V with filtering. [datasheet p.1334]" }, { "number": "45", "name": "IOVDD", "type": "power_in",- "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1332]"+ "description": "Power supply for digital GPIOs (Bank 0 IO voltage). Nominal 1.8 V to 3.3 V. Bulk/decoupling required. [datasheet p.1334]" }, { "number": "46", "name": "VREG_AVDD", "type": "power_in",- "description": "Analogue supply for the on-chip core voltage regulator and power-on-reset / brownout detection. Nominal 3.3 V. Must be powered even when the regulator is disabled. Can share source with VREG_VIN or IOVDD at 3.3 V, with careful decoupling. [datasheet p.1332]"+ "description": "Analogue supply for the on-chip core voltage regulator and power-on-reset / brownout detection. Nominal 3.3 V. Must be powered even when the regulator is disabled. Can share source with VREG_VIN or IOVDD at 3.3 V, with careful decoupling. [datasheet p.1334]" }, { "number": "47", "name": "VREG_PGND", "type": "power_in",- "description": "Power ground return for the internal switched-mode core voltage regulator. Tie externally to the main GND plane (dedicated short/low-impedance path recommended because switcher currents flow here). [datasheet p.1332]"+ "description": "Power ground return for the internal switched-mode core voltage regulator. Tie externally to the main GND plane (dedicated short/low-impedance path recommended because switcher currents flow here). [datasheet p.1334]" }, { "number": "48", "name": "VREG_LX", "type": "power_out",- "description": "Switching-node output of the on-chip buck regulator. Connect to the external inductor of the buck filter network (inductor + output capacitor to GND, feedback to VREG_FB). Nominal 1.1 V after LC filtering; max 200 mA. [datasheet p.1332]"+ "description": "Switching-node output of the on-chip buck regulator. Connect to the external inductor of the buck filter network (inductor + output capacitor to GND, feedback to VREG_FB). Nominal 1.1 V after LC filtering; max 200 mA. [datasheet p.1334]" }, { "number": "49", "name": "VREG_VIN", "type": "power_in",- "description": "Input supply for the internal core voltage regulator (both buck and low-quiescent LDO modes). Range 2.7 V to 5.5 V. Bulk + ceramic decoupling at the pin. [datasheet p.1332]"+ "description": "Input supply for the internal core voltage regulator (both buck and low-quiescent LDO modes). Range 2.7 V to 5.5 V. Bulk + ceramic decoupling at the pin. [datasheet p.1334]" }, { "number": "50", "name": "VREG_FB", "type": "input",- "description": "Feedback input for the on-chip core voltage regulator. Connect to the filtered regulator output (typically DVDD) so the regulator senses the actual core voltage after the inductor and output cap. [datasheet p.1332]"+ "description": "Feedback input for the on-chip core voltage regulator. Connect to the filtered regulator output (typically DVDD) so the regulator senses the actual core voltage after the inductor and output cap. [datasheet p.1335]" }, { "number": "51", "name": "USB_DM", "type": "bidirectional",- "description": "USB 1.1 Full/Low Speed D- signal. External 27 Ω series termination required for USB operation. Internal pull-ups/pull-downs are provided per the USB spec. May be reused as a software-controlled GPIO when USB is not used. [datasheet p.1331]"+ "description": "USB 1.1 Full/Low Speed D- signal. External 27 Ω series termination required for USB operation. Internal pull-ups/pull-downs are provided per the USB spec. May be reused as a software-controlled GPIO when USB is not used. [datasheet p.1334]" }, { "number": "52", "name": "USB_DP", "type": "bidirectional",- "description": "USB 1.1 Full/Low Speed D+ signal. External 27 Ω series termination required for USB operation. Powered by USB_OTP_VDD. [datasheet p.1331]"+ "description": "USB 1.1 Full/Low Speed D+ signal. External 27 Ω series termination required for USB operation. Powered by USB_OTP_VDD. [datasheet p.1334]" }, { "number": "53", "name": "USB_OTP_VDD", "type": "power_in",- "description": "Supply rail for the on-chip USB Full-Speed PHY and OTP storage. Nominal 3.3 V. Decouple close to the pin; USB_DP/USB_DM referenced to this rail. [datasheet p.1332]"+ "description": "Supply rail for the on-chip USB Full-Speed PHY and OTP storage. Nominal 3.3 V. Decouple close to the pin; USB_DP/USB_DM referenced to this rail. [datasheet p.1334]" }, { "number": "54", "name": "QSPI_IOVDD", "type": "power_in",- "description": "Supply for the dedicated QSPI IO pads (QSPI_SS, QSPI_SCLK, QSPI_SD0..3). Nominal 1.8 V to 3.3 V (2.7-3.6 V when driving an internal flash die in RP2354A). Must match the external flash/PSRAM Vcc. [datasheet p.1332]"+ "description": "Supply for the dedicated QSPI IO pads (QSPI_SS, QSPI_SCLK, QSPI_SD0..3). Nominal 1.8 V to 3.3 V (2.7-3.6 V when driving an internal flash die in RP2354A). Must match the external flash/PSRAM Vcc. [datasheet p.1334]" }, { "number": "55", "name": "QSPI_SD3", "type": "bidirectional",- "description": "QSPI data line 3 (dedicated XIP interface). Pull-up at reset. In single-SPI mode this doubles as /HOLD or /RESET on standard NOR flash. May be used as a software-controlled GPIO if the QSPI bus is not used. [datasheet p.1331]"+ "description": "QSPI data line 3 (dedicated XIP interface). Pull-up at reset. In single-SPI mode this doubles as /HOLD or /RESET on standard NOR flash. May be used as a software-controlled GPIO if the QSPI bus is not used. [datasheet p.1333]" }, { "number": "56", "name": "QSPI_SCLK", "type": "output",- "description": "QSPI clock output to external flash/PSRAM (and internal flash die in RP2354A). Pull-down at reset. Max 133 MHz when paired with W25Q16JV. [datasheet p.1331]"+ "description": "QSPI clock output to external flash/PSRAM (and internal flash die in RP2354A). Pull-down at reset. Max 133 MHz when paired with W25Q16JV. [datasheet p.1333]" }, { "number": "57", "name": "QSPI_SD0", "type": "bidirectional",- "description": "QSPI data line 0 (MOSI in single-SPI mode). Pull-down at reset. [datasheet p.1331]"+ "description": "QSPI data line 0 (MOSI in single-SPI mode). Pull-down at reset. [datasheet p.1333]" }, { "number": "58", "name": "QSPI_SD2", "type": "bidirectional",- "description": "QSPI data line 2. In single-SPI mode doubles as /WP on standard NOR flash. Pull-up at reset. [datasheet p.1331]"+ "description": "QSPI data line 2. In single-SPI mode doubles as /WP on standard NOR flash. Pull-up at reset. [datasheet p.1333]" }, { "number": "59", "name": "QSPI_SD1", "type": "bidirectional",- "description": "QSPI data line 1 (MISO in single-SPI mode). Pull-down at reset. If held high while QSPI_SS is low on power-up, selects UART-boot BOOTSEL mode (UART TX on SD2, RX on SD3). [datasheet p.1331]"+ "description": "QSPI data line 1 (MISO in single-SPI mode). Pull-down at reset. If held high while QSPI_SS is low on power-up, selects UART-boot BOOTSEL mode (UART TX on SD2, RX on SD3). [datasheet p.1333]" }, { "number": "60", "name": "QSPI_SS", "type": "bidirectional",- "description": "QSPI chip-select (active low). Pull-up at reset. If held low during reset the chip enters BOOTSEL mode (USB mass-storage/UART boot). Supports an external second QSPI device via a secondary CSn from Bank 0. [datasheet p.1331]"+ "description": "QSPI chip-select (active low). Pull-up at reset. If held low during reset the chip enters BOOTSEL mode (USB mass-storage/UART boot). Supports an external second QSPI device via a secondary CSn from Bank 0. [datasheet p.1333]" }, { "number": "61", "name": "GND", "type": "power_in",- "description": "Central exposed pad — single external ground connection, bonded to all internal ground pads. Must be soldered to the PCB ground plane for proper electrical operation and thermal conduction (θJB ≈ 12.6 °C/W). [datasheet p.1332]"+ "description": "Central exposed pad — single external ground connection, bonded to all internal ground pads. Must be soldered to the PCB ground plane for proper electrical operation and thermal conduction (θJB ≈ 12.6 °C/W). [datasheet p.1335]" } ], "provenance": {- "factory_chain": {- "pipeline": "adom-parts (board-derived) 0.1",- "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",- "at": "2026-10-09"- }, "datasheet": {- "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8562345067823054848",- "pages": 1357,- "sha256": "78e209ff6a40a8a7ecc750488a9065f61d962f607404ae6731b5192c9fef3cc1",- "source_tier": "lcsc"+ "url": "https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf",+ "pages": 1371,+ "sha256": "a638d6780da919162660691bfa02c6dcf7c2a0b6e9f18e2d7519c80b664a2e39",+ "source_tier": "mfr",+ "retrieved": "2026-10-27",+ "edition": "build-date 2026-10-01" }, "cad": "Footprint and symbol as used on Adom board designs; 3D model: KiCad library 3D model QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm (built with the KiCad generator) (CC-BY-SA 4.0 with the KiCad library exception)", "pins": {@@ -442,12 +439,13 @@ "described": 60, "cites_pages": true, "refuses_to_fabricate": true+ },+ "build": {+ "tool": "board-derived part page builder 0.1: one-off Claude session scripts in Caleb Taylor's container (retired; not the Adom parts factory)",+ "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+ "at": "2026-10-09" } },- "viewers": {- "symbol": "viewers/symbol.html",- "footprint": "viewers/footprint.html"- }, "models_3d": [ { "file": "rp2350a.step",@@ -465,7 +463,7 @@ "footprint_binding": "identity", "sha256": "6a022e055b042ab953db707db0a727f3f7982d1385b96e1682cf875faa8b442b", "checked": "2026-10-09",- "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+ "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)" }, { "file": "rp2350a-etched.step",@@ -483,7 +481,7 @@ "footprint_binding": "identity", "sha256": "5a23699ade2f0e85eef0be6103bd334fe1c35717576b363195176324b574694b", "checked": "2026-10-09",- "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+ "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)" } ] },
page.json+17−17@@ -4,7 +4,7 @@ "slug": "rp2350a", "title": "RP2350A", "brief": "Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",- "version": "0.1.3",+ "version": "0.1.4", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -408,11 +408,6 @@ } ], "provenance": {- "factory_chain": {- "pipeline": "adom-parts (board-derived) 0.1",- "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",- "at": "2026-10-09"- }, "datasheet": { "url": "https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf", "pages": 1371,@@ -427,6 +422,11 @@ "described": 60, "cites_pages": true, "refuses_to_fabricate": true+ },+ "build": {+ "tool": "board-derived part page builder 0.1: one-off Claude session scripts in Caleb Taylor's container (retired; not the Adom parts factory)",+ "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+ "at": "2026-10-09" } }, "models_3d": [@@ -438,15 +438,15 @@ "origin": "footprint origin", "seat": "z = 0 (PCB top surface)", "extents_mm": [- 7.0,- 7.0,+ 7,+ 7, 0.9 ],- "zmin_mm": -0.0,+ "zmin_mm": 0, "footprint_binding": "identity", "sha256": "6a022e055b042ab953db707db0a727f3f7982d1385b96e1682cf875faa8b442b", "checked": "2026-10-09",- "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+ "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)" }, { "file": "rp2350a-etched.step",@@ -456,15 +456,15 @@ "origin": "footprint origin", "seat": "z = 0 (PCB top surface)", "extents_mm": [- 7.0,- 7.0,+ 7,+ 7, 0.902 ],- "zmin_mm": -0.0,+ "zmin_mm": 0, "footprint_binding": "identity", "sha256": "5a23699ade2f0e85eef0be6103bd334fe1c35717576b363195176324b574694b", "checked": "2026-10-09",- "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+ "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)" } ] },@@ -518,7 +518,7 @@ "rp2350a-hero.glb", "rp2350a-hero.overlay.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",+ "org": "adom" }
rp2350a-hero.glb⋯ 1 unchanged line ⋯
rp2350a-hero.overlay.json+1−1@@ -72,7 +72,7 @@ "glb": "rp2350a-etched.glb", "glb_sha256": "618032b5a124715c20d3a90bb35c9c36a95959d7678f1518762c0df47d2be241", "footprint": "rp2350a.kicad_mod",- "footprint_sha256": "99bd6e3b6cfc861cceb47298adff126a77b442cf0b83094ca4fdcc59bee15cd8",+ "footprint_sha256": "c42c1fefe3d353d52ff8388c8ed5c747e7d2ca867143da8140952b2c4e0c9091", "pins": "page.json component.pins", "pins_sha256": "88affdc839046b203ebd0cbdcea6211bda728f402f3c6f4e40aeb6d9bcbb557d" },
rp2350a.kicad_mod+3−3@@ -141,7 +141,7 @@ (font (size 0.5 0.5) (thickness 0.125)) ) )- (property "LCSC Part" "C42411118"+ (property "LCSC Part" "" (at 0 0) (unlocked yes) (layer "F.Fab")@@ -171,7 +171,7 @@ (font (size 0.5 0.5) (thickness 0.125)) ) )- (property "Manufacturer_Part_Number" "RP2350A"+ (property "Manufacturer_Part_Number" "" (at 0 0) (unlocked yes) (layer "F.Fab")@@ -191,7 +191,7 @@ (font (size 0.5 0.5) (thickness 0.125)) ) )- (property "Mouser Part Number" "358-SC1509"+ (property "Mouser Part Number" "" (at 0 0) (unlocked yes) (layer "F.Fab")
rp2350a.kicad_sym+15−3@@ -1,6 +1,6 @@ (kicad_symbol_lib (version 20241209)- (generator "adom-parts")+ (generator "board-derived") (generator_version "1.0") (symbol "RP2350A" (pin_names (offset 1.016))@@ -66,6 +66,20 @@ (hide yes) ) )+ (property "Mouser" "358-SC1509"+ (at 0 0 0)+ (effects+ (font (size 1.27 1.27))+ (hide yes)+ )+ )+ (property "DigiKey" "2648-SC1509-A4TR-ND"+ (at 0 0 0)+ (effects+ (font (size 1.27 1.27))+ (hide yes)+ )+ ) (property "LCSC" "C42411118" (at 0 0 0) (effects@@ -73,8 +87,6 @@ (hide yes) ) )- (property "DigiKey" "2648-SC1509-A4TR-ND" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))- (property "Mouser" "358-SC1509" (at 0 0 0) (effects (font (size 1.27 1.27)) hide)) (symbol "RP2350A_0_0" (text "Raspberry Pi" (at 0 5.08 0)
verification.json+6−2@@ -161,6 +161,10 @@ "text": "3D body 7.0 x 7.0 x 0.9 mm (D/E = 7 BSC, A max 0.90), Z-up, seated on z = 0, centred on the pads", "result": "pass" },+ {+ "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",+ "result": "pass"+ }, { "text": "component-page-verify: all checks pass; adom-lbr validate OK", "result": "pass"@@ -173,8 +177,8 @@ } ], "files": {- "rp2350a.kicad_sym": "e4abcc4f794b9145815125ec00d5db9166674be0a645b60745a9ee070ffa5cf5",- "rp2350a.kicad_mod": "99bd6e3b6cfc861cceb47298adff126a77b442cf0b83094ca4fdcc59bee15cd8",+ "rp2350a.kicad_sym": "20b7fd9f7a707ca3849970d6d15a2269ecd6680fe262737977ebc43b463fad6d",+ "rp2350a.kicad_mod": "c42c1fefe3d353d52ff8388c8ed5c747e7d2ca867143da8140952b2c4e0c9091", "rp2350a.step": "6a022e055b042ab953db707db0a727f3f7982d1385b96e1682cf875faa8b442b" } }