main
Ray Set visibility: public 7536922
{
  "schema_version": 1,
  "type": "component",
  "slug": "rffc2071tr13",
  "title": "RFFC2071TR13",
  "brief": "Qorvo RF Mixers, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "rf & radio",
    "rffc2071tr13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "RFFC2071TR13",
    "manufacturer": "Qorvo",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "RF & Radio",
    "subcategory": "RF Mixers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8146790fedd30911cc00ff7363a59b08.pdf",
    "parts": {
      "symbol": "rffc2071tr13.kicad_sym",
      "footprint": "rffc2071tr13.kicad_mod",
      "model_3d": "rffc2071tr13-hero.glb",
      "model_3d_plain": "rffc2071tr13-etched.glb",
      "model_3d_step": "rffc2071tr13-etched.step",
      "model_3d_step_plain": "rffc2071tr13.step",
      "lbr": "rffc2071tr13.lbr"
    },
    "distributor_links": {
      "lcsc": "C471174",
      "digikey": "2312-RFFC2071TR13TR-ND",
      "mouser": "772-RFFC2071"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T17:12:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2312-RFFC2071TR13TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "772-RFFC2071",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ENBL/GPO5",
        "type": "input",
        "description": "Device enable pin that also serves as general purpose output GPO5; an RC low pass filter may be used on this line to reduce digital noise."
      },
      {
        "number": "2",
        "name": "EXT_LO",
        "type": "input",
        "description": "External local oscillator input, which must be driven through an AC-coupling capacitor or transformer with no DC voltage applied; external LO input level is 0 dBm from a 50 ohm source via a 1:1 balun."
      },
      {
        "number": "3",
        "name": "EXT_LO_DEC",
        "type": "passive",
        "description": "Decoupling pin for the external local oscillator input."
      },
      {
        "number": "4",
        "name": "REXT",
        "type": "passive",
        "description": "External bandgap bias resistor pin; a 51 kOhm resistor must be connected from this pin to ground, as it is sensitive to low frequency noise injection."
      },
      {
        "number": "5",
        "name": "ANA_VDD1",
        "type": "power_in",
        "description": "Analog supply pin, operating range 2.7 V to 3.3 V, requiring good RF decoupling."
      },
      {
        "number": "6",
        "name": "LFILT1",
        "type": "output",
        "description": "Phase detector output and low-frequency noise-sensitive node of the loop filter."
      },
      {
        "number": "7",
        "name": "LFILT2",
        "type": "output",
        "description": "Loop filter op-amp output and low-frequency noise-sensitive node."
      },
      {
        "number": "8",
        "name": "LFILT3",
        "type": "input",
        "description": "VCO control input and low-frequency noise-sensitive node; tuning voltage typically ranges from +0.1 V to +2.4 V."
      },
      {
        "number": "9",
        "name": "MODE/GPO6",
        "type": "bidirectional",
        "description": "Mode select pin that also serves as general purpose output GPO6; it selects which mixer(s) and PLL register bank are active."
      },
      {
        "number": "10",
        "name": "REF_IN",
        "type": "input",
        "description": "External reference input, which requires an AC coupling capacitor; typical input is 0.8 Vp-p clipped sine wave with 500 to 1500 mVp-p range and frequency 10 to 104 MHz."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "12",
        "name": "TM",
        "type": "passive",
        "description": "Test mode pin that must be connected to ground."
      },
      {
        "number": "13",
        "name": "MIX1_IPN",
        "type": "input",
        "description": "Differential negative input of mixer 1, which must be AC coupled or transformer coupled with no DC applied."
      },
      {
        "number": "14",
        "name": "MIX1_IPP",
        "type": "input",
        "description": "Differential positive input of mixer 1, which must be AC coupled or transformer coupled with no DC applied; mixer input frequency range is 30 MHz to 2700 MHz."
      },
      {
        "number": "15",
        "name": "GPO1/ADD1",
        "type": "bidirectional",
        "description": "General purpose output GPO1 that also serves as the MultiSlice address bit ADD1."
      },
      {
        "number": "16",
        "name": "GPO2/ADD2",
        "type": "bidirectional",
        "description": "General purpose output GPO2 that also serves as the MultiSlice address bit ADD2."
      },
      {
        "number": "17",
        "name": "MIX1_OPN",
        "type": "output",
        "description": "Differential negative output of mixer 1, which must be fed through a center-tapped balun or RF choke to the supply; it is a high impedance constant current output."
      },
      {
        "number": "18",
        "name": "MIX1_OPP",
        "type": "output",
        "description": "Differential positive output of mixer 1, which must be fed through a center-tapped balun or RF choke to the supply; it is a high impedance constant current output."
      },
      {
        "number": "19",
        "name": "DIG_VDD",
        "type": "power_in",
        "description": "Digital supply pin, operating range 2.7 V to 3.3 V, which should be decoupled as close to the pin as possible."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "22",
        "name": "ANA_VDD2",
        "type": "power_in",
        "description": "Analog supply pin, operating range 2.7 V to 3.3 V, requiring good RF decoupling."
      },
      {
        "number": "23",
        "name": "MIX2_IPP",
        "type": "input",
        "description": "Differential positive input of mixer 2, which must be AC coupled or transformer coupled with no DC applied."
      },
      {
        "number": "24",
        "name": "MIX2_IPN",
        "type": "input",
        "description": "Differential negative input of mixer 2, which must be AC coupled or transformer coupled with no DC applied."
      },
      {
        "number": "25",
        "name": "GPO3/FM",
        "type": "bidirectional",
        "description": "General purpose output GPO3 that also serves as frequency control input for binary FSK modulation."
      },
      {
        "number": "26",
        "name": "GPO4/LD/DO",
        "type": "bidirectional",
        "description": "General purpose output GPO4 that also serves as lock detect output and, in 4-wire mode, serial data out; GPO output drives up to 20 mA."
      },
      {
        "number": "27",
        "name": "MIX2_OPN",
        "type": "output",
        "description": "Differential negative output of mixer 2, which must be fed through a center-tapped balun or RF choke to the supply; it is a high impedance constant current output."
      },
      {
        "number": "28",
        "name": "MIX2_OPP",
        "type": "output",
        "description": "Differential positive output of mixer 2, which must be fed through a center-tapped balun or RF choke to the supply; it is a high impedance constant current output."
      },
      {
        "number": "29",
        "name": "RESETX",
        "type": "input",
        "description": "Chip reset input, active low; connect to DIG_VDD if asynchronous reset is not required."
      },
      {
        "number": "30",
        "name": "ENX",
        "type": "input",
        "description": "Serial interface select input, active low."
      },
      {
        "number": "31",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input for the 3-wire serial bus."
      },
      {
        "number": "32",
        "name": "SDATA",
        "type": "input",
        "description": "Serial interface data input for the 3-wire serial bus; in 4-wire mode this pin is the serial data in pin."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The RFFC2071TR13 is the RFFC2071 variant, so the RFFC2071 pin-out (with MIX1 and MIX2 pins) was used"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0375,
        "at": "2026-10-28T17:12:38"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/8146790fedd30911cc00ff7363a59b08.pdf",
        "pages": 23,
        "sha256": "b8c4267e36ae68b8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rffc2071tr13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rffc2071tr13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "53e2aed1fb163fee94f17a3e15b785e8ff9cd6a948bd633dd1f954e303f92feb",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Qorvo",
      "Package": "QFN-32-EP(5x5)",
      "Category": "RF & Radio",
      "Pins": "33"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rffc2071tr13"
  ],
  "discovery_pitch": "RFFC2071TR13 (Qorvo) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rffc2071tr13.kicad_sym",
    "rffc2071tr13.kicad_mod",
    "rffc2071tr13.glb",
    "rffc2071tr13.step",
    "rffc2071tr13.lbr",
    "docs/hero.png",
    "docs/rffc2071tr13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rffc2071tr13-hero.glb",
    "rffc2071tr13-hero.overlay.json",
    "rffc2071tr13-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}