component
RF430FRL154HCRGER
Public Made by Adomby adom
Texas Instruments RFID ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# RF430FRL154HCRGER++**Texas Instruments** · RFID ICs · VQFN-24-EP(4x4)++RF430FRL154HCRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ANT1 | input | Antenna input 1 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V. |+| 2 | ANT2 | input | Antenna input 2 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V. |+| 3 | VDDSW | passive | Switched supply voltage; recommended 2.2 µF low-ESR capacitor. |+| 4 | VDDB | power_in | Battery supply voltage, 1.45 V to 1.65 V recommended (absolute max 1.65 V), with a 100 nF capacitor. |+| 5 | CP1 | passive | Charge pump flying capacitor terminal 1; 10 nF CFLY recommended between CP1 and CP2. |+| 6 | CP2 | passive | Charge pump flying capacitor terminal 2; 10 nF CFLY recommended between CP1 and CP2. |+| 7 | VDD2X | power_out | Voltage doubler output; 100 nF capacitor recommended. |+| 8 | P1.3/SPI_STE/TA0.2/ACLK/TA0CLK | bidirectional | General-purpose digital I/O multiplexed with SPI slave transmit enable, Timer_A TA0.2 output, ACLK output and TA0CLK input. |+| 9 | P1.2/SPI_CLK/MCLK/TA0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI clock, MCLK output and Timer_A TA0.0 output. |+| 10 | RST/NMI | input | Active-low reset input or non-maskable interrupt input; if unused tie to VCC or VSS with a 10-nF capacitor to GND. |+| 11 | P1.1/SPI_SOMI/SCL/ACLK/TA0.2/CCI0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI SOMI, I2C clock, ACLK output, Timer_A TA0.2 output and CCI0.0 capture input. |+| 12 | P1.0/SPI_SIMO/SDA/SMCLK/TA0.1/CCI0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI SIMO, I2C data, SMCLK output, Timer_A TA0.1 output and CCI0.0 capture input. |+| 13 | ADC0 | input | ADC input pin 0; low-leakage pin with reduced ESD tolerance of ±500 V HBM. |+| 14 | TST2 | passive | Internal test pin; connect to GND. |+| 15 | SVSS | passive | Sensor reference potential; 1 µF capacitor to VSS recommended. |+| 16 | TST1 | passive | Internal test pin; connect to GND. |+| 17 | ADC1/TEMP1 | input | ADC input pin 1 / resistive bias pin 1. |+| 18 | ADC2/TEMP2 | input | ADC input pin 2 / resistive bias pin 2. |+| 19 | TMS/P1.7/TA0.1/TA0.0/CCI0.2 | bidirectional | JTAG test mode select, or general-purpose digital I/O multiplexed with Timer_A TA0.1/TA0.0 outputs and CCI0.2 capture input. |+| 20 | TDO/P1.6/TA0.0/TA0.2/CCI0.2 | bidirectional | JTAG test data output, or general-purpose digital I/O multiplexed with Timer_A TA0.0/TA0.2 outputs and CCI0.2 capture input. |+| 21 | TDI/P1.5/TA0.2/MCLK/CCI0.1 | bidirectional | JTAG test data input, or general-purpose digital I/O multiplexed with Timer_A TA0.2 output, MCLK output and CCI0.1 capture input. |+| 22 | TCK/P1.4/TA0.1/SMCLK/CCI0.1 | bidirectional | JTAG test clock, or general-purpose digital I/O multiplexed with Timer_A TA0.1 output, SMCLK output, CCI0.1 capture input and external clock input CLKIN. |+| 23 | VDDH | power_out | Rectified voltage from the RF analog front end. |+| 24 | VDDD | power_out | Digital supply voltage; 1 µF capacitor recommended. |+| 25 | VSS | power_in | Ground reference (combined digital and analog ground), bonded to the exposed pad. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | RF And Wireless |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `RF430FRL154HCRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `rf430frl154hcrger-etched.step` / `rf430frl154hcrger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rf430frl154hcrger.step` / `rf430frl154hcrger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/rf430frl154h) (54 pp, sha256 `4eca093bb4976829`, retrieved 2026-10-06, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rf430frl154hcrger-datasheet.pdf)
page.jsonadded+264@@ -0,0 +1,264 @@+{+ "slug": "rf430frl154hcrger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RFID ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "rf and wireless",+ "rf430frl154hcrger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "rf430frl154hcrger.kicad_sym",+ "rf430frl154hcrger.kicad_mod",+ "rf430frl154hcrger.glb",+ "rf430frl154hcrger.step",+ "rf430frl154hcrger.lbr",+ "docs/hero.png",+ "docs/rf430frl154hcrger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "rf430frl154hcrger-hero.glb",+ "rf430frl154hcrger-hero.overlay.json"+ ],+ "component": {+ "mpn": "RF430FRL154HCRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "RF And Wireless",+ "subcategory": "RFID ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/rf430frl154h",+ "parts": {+ "symbol": "rf430frl154hcrger.kicad_sym",+ "footprint": "rf430frl154hcrger.kicad_mod",+ "model_3d": "rf430frl154hcrger-hero.glb",+ "model_3d_plain": "rf430frl154hcrger.glb",+ "model_3d_step": "rf430frl154hcrger-etched.step",+ "model_3d_step_plain": "rf430frl154hcrger.step",+ "lbr": "rf430frl154hcrger.lbr"+ },+ "distributor_links": {+ "lcsc": 2654882,+ "digikey": "296-42690-2-ND",+ "mouser": "595-R430FRL154HCRGER"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T03:24:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-42690-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-R430FRL154HCRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "ANT1",+ "type": "input",+ "description": "Antenna input 1 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V."+ },+ {+ "number": "2",+ "name": "ANT2",+ "type": "input",+ "description": "Antenna input 2 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V."+ },+ {+ "number": "3",+ "name": "VDDSW",+ "type": "passive",+ "description": "Switched supply voltage; recommended 2.2 µF low-ESR capacitor."+ },+ {+ "number": "4",+ "name": "VDDB",+ "type": "power_in",+ "description": "Battery supply voltage, 1.45 V to 1.65 V recommended (absolute max 1.65 V), with a 100 nF capacitor."+ },+ {+ "number": "5",+ "name": "CP1",+ "type": "passive",+ "description": "Charge pump flying capacitor terminal 1; 10 nF CFLY recommended between CP1 and CP2."+ },+ {+ "number": "6",+ "name": "CP2",+ "type": "passive",+ "description": "Charge pump flying capacitor terminal 2; 10 nF CFLY recommended between CP1 and CP2."+ },+ {+ "number": "7",+ "name": "VDD2X",+ "type": "power_out",+ "description": "Voltage doubler output; 100 nF capacitor recommended."+ },+ {+ "number": "8",+ "name": "P1.3/SPI_STE/TA0.2/ACLK/TA0CLK",+ "type": "bidirectional",+ "description": "General-purpose digital I/O multiplexed with SPI slave transmit enable, Timer_A TA0.2 output, ACLK output and TA0CLK input."+ },+ {+ "number": "9",+ "name": "P1.2/SPI_CLK/MCLK/TA0.0",+ "type": "bidirectional",+ "description": "General-purpose digital I/O multiplexed with SPI clock, MCLK output and Timer_A TA0.0 output."+ },+ {+ "number": "10",+ "name": "RST/NMI",+ "type": "input",+ "description": "Active-low reset input or non-maskable interrupt input; if unused tie to VCC or VSS with a 10-nF capacitor to GND."+ },+ {+ "number": "11",+ "name": "P1.1/SPI_SOMI/SCL/ACLK/TA0.2/CCI0.0",+ "type": "bidirectional",+ "description": "General-purpose digital I/O multiplexed with SPI SOMI, I2C clock, ACLK output, Timer_A TA0.2 output and CCI0.0 capture input."+ },+ {+ "number": "12",+ "name": "P1.0/SPI_SIMO/SDA/SMCLK/TA0.1/CCI0.0",+ "type": "bidirectional",+ "description": "General-purpose digital I/O multiplexed with SPI SIMO, I2C data, SMCLK output, Timer_A TA0.1 output and CCI0.0 capture input."+ },+ {+ "number": "13",+ "name": "ADC0",+ "type": "input",+ "description": "ADC input pin 0; low-leakage pin with reduced ESD tolerance of ±500 V HBM."+ },+ {+ "number": "14",+ "name": "TST2",+ "type": "passive",+ "description": "Internal test pin; connect to GND."+ },+ {+ "number": "15",+ "name": "SVSS",+ "type": "passive",+ "description": "Sensor reference potential; 1 µF capacitor to VSS recommended."+ },+ {+ "number": "16",+ "name": "TST1",+ "type": "passive",+ "description": "Internal test pin; connect to GND."+ },+ {+ "number": "17",+ "name": "ADC1/TEMP1",+ "type": "input",+ "description": "ADC input pin 1 / resistive bias pin 1."+ },+ {+ "number": "18",+ "name": "ADC2/TEMP2",+ "type": "input",+ "description": "ADC input pin 2 / resistive bias pin 2."+ },+ {+ "number": "19",+ "name": "TMS/P1.7/TA0.1/TA0.0/CCI0.2",+ "type": "bidirectional",+ "description": "JTAG test mode select, or general-purpose digital I/O multiplexed with Timer_A TA0.1/TA0.0 outputs and CCI0.2 capture input."+ },+ {+ "number": "20",+ "name": "TDO/P1.6/TA0.0/TA0.2/CCI0.2",+ "type": "bidirectional",+ "description": "JTAG test data output, or general-purpose digital I/O multiplexed with Timer_A TA0.0/TA0.2 outputs and CCI0.2 capture input."+ },+ {+ "number": "21",+ "name": "TDI/P1.5/TA0.2/MCLK/CCI0.1",+ "type": "bidirectional",+ "description": "JTAG test data input, or general-purpose digital I/O multiplexed with Timer_A TA0.2 output, MCLK output and CCI0.1 capture input."+ },+ {+ "number": "22",+ "name": "TCK/P1.4/TA0.1/SMCLK/CCI0.1",+ "type": "bidirectional",+ "description": "JTAG test clock, or general-purpose digital I/O multiplexed with Timer_A TA0.1 output, SMCLK output, CCI0.1 capture input and external clock input CLKIN."+ },+ {+ "number": "23",+ "name": "VDDH",+ "type": "power_out",+ "description": "Rectified voltage from the RF analog front end."+ },+ {+ "number": "24",+ "name": "VDDD",+ "type": "power_out",+ "description": "Digital supply voltage; 1 µF capacitor recommended."+ },+ {+ "number": "25",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (combined digital and analog ground), bonded to the exposed pad."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: ANT1 and ANT2 are marked as inputs (I) in the signal table but represent RF antenna connections that; CLKIN (external clock input) is listed in signal descriptions but without explicit pin number; port ; Exposed pad designation: datasheet lists 'VSS Pad' without explicit number. Assigned as 'EP' (Expose",+ "exposed pad 25 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 25,+ "cost_usd": 0.2846,+ "at": "2026-10-06T03:24:00"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/rf430frl154h",+ "pages": 54,+ "sha256": "4eca093bb4976829",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}