component
RF430FRL154HCRGER
Public Made by Adomby adom
Texas Instruments RFID ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownRF430FRL154HCRGER
Texas Instruments · RFID ICs · VQFN-24-EP(4x4)
RF430FRL154HCRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT1 | input | Antenna input 1 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V. |
| 2 | ANT2 | input | Antenna input 2 for the 13.56-MHz RF front end; antenna voltage up to 3.6 V. |
| 3 | VDDSW | passive | Switched supply voltage; recommended 2.2 µF low-ESR capacitor. |
| 4 | VDDB | power_in | Battery supply voltage, 1.45 V to 1.65 V recommended (absolute max 1.65 V), with a 100 nF capacitor. |
| 5 | CP1 | passive | Charge pump flying capacitor terminal 1; 10 nF CFLY recommended between CP1 and CP2. |
| 6 | CP2 | passive | Charge pump flying capacitor terminal 2; 10 nF CFLY recommended between CP1 and CP2. |
| 7 | VDD2X | power_out | Voltage doubler output; 100 nF capacitor recommended. |
| 8 | P1.3/SPI_STE/TA0.2/ACLK/TA0CLK | bidirectional | General-purpose digital I/O multiplexed with SPI slave transmit enable, Timer_A TA0.2 output, ACLK output and TA0CLK input. |
| 9 | P1.2/SPI_CLK/MCLK/TA0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI clock, MCLK output and Timer_A TA0.0 output. |
| 10 | RST/NMI | input | Active-low reset input or non-maskable interrupt input; if unused tie to VCC or VSS with a 10-nF capacitor to GND. |
| 11 | P1.1/SPI_SOMI/SCL/ACLK/TA0.2/CCI0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI SOMI, I2C clock, ACLK output, Timer_A TA0.2 output and CCI0.0 capture input. |
| 12 | P1.0/SPI_SIMO/SDA/SMCLK/TA0.1/CCI0.0 | bidirectional | General-purpose digital I/O multiplexed with SPI SIMO, I2C data, SMCLK output, Timer_A TA0.1 output and CCI0.0 capture input. |
| 13 | ADC0 | input | ADC input pin 0; low-leakage pin with reduced ESD tolerance of ±500 V HBM. |
| 14 | TST2 | passive | Internal test pin; connect to GND. |
| 15 | SVSS | passive | Sensor reference potential; 1 µF capacitor to VSS recommended. |
| 16 | TST1 | passive | Internal test pin; connect to GND. |
| 17 | ADC1/TEMP1 | input | ADC input pin 1 / resistive bias pin 1. |
| 18 | ADC2/TEMP2 | input | ADC input pin 2 / resistive bias pin 2. |
| 19 | TMS/P1.7/TA0.1/TA0.0/CCI0.2 | bidirectional | JTAG test mode select, or general-purpose digital I/O multiplexed with Timer_A TA0.1/TA0.0 outputs and CCI0.2 capture input. |
| 20 | TDO/P1.6/TA0.0/TA0.2/CCI0.2 | bidirectional | JTAG test data output, or general-purpose digital I/O multiplexed with Timer_A TA0.0/TA0.2 outputs and CCI0.2 capture input. |
| 21 | TDI/P1.5/TA0.2/MCLK/CCI0.1 | bidirectional | JTAG test data input, or general-purpose digital I/O multiplexed with Timer_A TA0.2 output, MCLK output and CCI0.1 capture input. |
| 22 | TCK/P1.4/TA0.1/SMCLK/CCI0.1 | bidirectional | JTAG test clock, or general-purpose digital I/O multiplexed with Timer_A TA0.1 output, SMCLK output, CCI0.1 capture input and external clock input CLKIN. |
| 23 | VDDH | power_out | Rectified voltage from the RF analog front end. |
| 24 | VDDD | power_out | Digital supply voltage; 1 µF capacitor recommended. |
| 25 | VSS | power_in | Ground reference (combined digital and analog ground), bonded to the exposed pad. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | RF And Wireless |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
RF430FRL154HCRGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
rf430frl154hcrger-etched.step/rf430frl154hcrger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rf430frl154hcrger.step/rf430frl154hcrger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
4eca093bb4976829, retrieved 2026-10-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).