Generated by kicad-footprint-generator · KiCad file format 20260206
REG710NA-2.5
Texas Instruments · DC-DC Converters · SOT-23-6
REG710NA-2.5 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | power_out | Output supply pin; connect the output capacitor to this pin, and the REG710-2.5 output is 2.5 V nominal (2.35 V to 2.65 V at IOUT ≤ 30 mA, VIN 2 V to 5.5 V). |
| 2 | GND | power_in | Ground pin. |
| 3 | Enable | input | Hardware enable/disable pin, high enables the device; logic high input is 1.3 V minimum up to VIN, logic low is 0.4 V maximum, and the pin cannot be left floating. |
| 4 | Cpump- | passive | Connects to the flying capacitor (CPUMP, 0.22 µF in the typical circuit). |
| 5 | Vin | power_in | Input supply pin; connect the input capacitor to this pin, with an input range of 1.8 V to 5.5 V and an absolute maximum of 6 V. |
| 6 | Cpump+ | passive | Connects to the flying capacitor (CPUMP, 0.22 µF in the typical circuit). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VIN | -0.3 | 6 | V | 3 | ||
| Enable input (absolute maximum) | -0.3 | V | 3 | ||||
| Operating ambient temperature (absolute maximum) | TA | -55 | 125 | °C | 3 | ||
| Operating junction temperature (printed as operating ambient temperature) | TJ | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Input voltage range (recommended) | VIN | 1.8 | 5.5 | V | All other models | 4 | |
| Operating ambient temperature range (recommended) | TA | -40 | 85 | °C | 4 | ||
| Input voltage range | VIN | 1.8 | 5.5 | V | Tested startup; all other models | 4 | |
| Logic high input voltage (ENABLE) | 1.3 | V | VIN = 1.8 V to 5.5 V | 4 | |||
| Logic low input voltage (ENABLE) | -0.2 | 0.4 | V | VIN = 1.8 V to 5.5 V | 4 | ||
| Logic high input current (ENABLE) | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Logic low input current (ENABLE) | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Output voltage | 2.35 | 2.5 | 2.65 | V | IOUT ≤ 10 mA, 1.8 V ≤ VIN ≤ 5.5 V | 5 | |
| Operating quiescent current | IQ | 65 | 100 | μA | IOUT = 0 mA, TA = 25°C | 4 | |
| Shutdown current | ISD | 0.01 | 1 | μA | VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C | 4 | |
| Oscillator frequency | 1 | MHz | 4 | ||||
| Nominal output current | Iout | 30 | mA | TA = 25°C | 5 | ||
| Short circuit output current | Isc | 100 | mA | TA = 25°C | 5 | ||
| Output ripple voltage | 35 | mVPP | IOUT = 30 mA, TA = 25°C | 5 | |||
| Thermal shutdown temperature | 160 | °C | 5 | ||||
| Thermal shutdown recovery temperature | 140 | °C | 5 | ||||
| Junction-to-ambient thermal resistance | RθJA | 184.4 | °C/W | DBV package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 124.6 | °C/W | DBV package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 30.6 | °C/W | DBV package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 22.1 | °C/W | DBV package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 30.1 | °C/W | DBV package | 4 |
CAD (KiCad official)
- Symbol:
REG710NA-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
reg710na-2-5-250-etched.step/reg710na-2-5-250-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg710na-2-5-250.step/reg710na-2-5-250.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
53f7040159d99c87, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).