Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REG710NA-2.5

Texas Instruments · DC-DC Converters · SOT-23-6

REG710NA-2.5 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vout power_out Output supply pin; connect the output capacitor to this pin, and the REG710-2.5 output is 2.5 V nominal (2.35 V to 2.65 V at IOUT ≤ 30 mA, VIN 2 V to 5.5 V).
2 GND power_in Ground pin.
3 Enable input Hardware enable/disable pin, high enables the device; logic high input is 1.3 V minimum up to VIN, logic low is 0.4 V maximum, and the pin cannot be left floating.
4 Cpump- passive Connects to the flying capacitor (CPUMP, 0.22 µF in the typical circuit).
5 Vin power_in Input supply pin; connect the input capacitor to this pin, with an input range of 1.8 V to 5.5 V and an absolute maximum of 6 V.
6 Cpump+ passive Connects to the flying capacitor (CPUMP, 0.22 µF in the typical circuit).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VIN -0.3 6 V 3
Enable input (absolute maximum) -0.3 V 3
Operating ambient temperature (absolute maximum) TA -55 125 °C 3
Operating junction temperature (printed as operating ambient temperature) TJ -55 150 °C 3
Storage temperature Tstg -55 150 °C 3
Input voltage range (recommended) VIN 1.8 5.5 V All other models 4
Operating ambient temperature range (recommended) TA -40 85 °C 4
Input voltage range VIN 1.8 5.5 V Tested startup; all other models 4
Logic high input voltage (ENABLE) 1.3 V VIN = 1.8 V to 5.5 V 4
Logic low input voltage (ENABLE) -0.2 0.4 V VIN = 1.8 V to 5.5 V 4
Logic high input current (ENABLE) 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Logic low input current (ENABLE) 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Output voltage 2.35 2.5 2.65 V IOUT ≤ 10 mA, 1.8 V ≤ VIN ≤ 5.5 V 5
Operating quiescent current IQ 65 100 μA IOUT = 0 mA, TA = 25°C 4
Shutdown current ISD 0.01 1 μA VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C 4
Oscillator frequency 1 MHz 4
Nominal output current Iout 30 mA TA = 25°C 5
Short circuit output current Isc 100 mA TA = 25°C 5
Output ripple voltage 35 mVPP IOUT = 30 mA, TA = 25°C 5
Thermal shutdown temperature 160 °C 5
Thermal shutdown recovery temperature 140 °C 5
Junction-to-ambient thermal resistance RθJA 184.4 °C/W DBV package 4
Junction-to-case (top) thermal resistance RθJC(top) 124.6 °C/W DBV package 4
Junction-to-board thermal resistance RθJB 30.6 °C/W DBV package 4
Junction-to-top characterization parameter ψJT 22.1 °C/W DBV package 4
Junction-to-board characterization parameter ψJB 30.1 °C/W DBV package 4

CAD (KiCad official)

  • Symbol: REG710NA-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: reg710na-2-5-250-etched.step / reg710na-2-5-250-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); reg710na-2-5-250.step / reg710na-2-5-250.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 53f7040159d99c87, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF