main
Ray
ref5050aqdrq1: specified limits as data (metadata.characteristics, 36 rows from the datasheet)
f22f8fd
REF5050AQDRQ1
Texas Instruments · Voltage Reference · SOIC-8
REF5050AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; do not use. |
| 2 | VIN | power_in | Input supply voltage, requiring VOUT + 0.2 V (or 2.7 V minimum for VOUT ≤ 2.5 V) up to 18 V. |
| 3 | TEMP | output | Temperature-dependent voltage output with approximately 60-kΩ source impedance, following VTEMP = 509 mV + 2.64 mV/°C × T. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM/NR | input | Trim and noise reduction pin providing ±15-mV adjustment of the device bandgap (and hence VOUT); a capacitor to GND with the internal 1-kΩ resistor forms a noise-reduction low-pass filter. |
| 6 | VOUT | output | Regulated reference voltage output, capable of sourcing/sinking up to ±10 mA. |
| 7 | NC | unconnected | No internal connection; do not use. |
| 8 | DNC | unconnected | Do not connect; do not use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade | -0.1 | 0.1 | % | 5 | |||
| Output voltage temperature drift, standard grade | dVOUT/dT | 3 | 8 | ppm/°C | Over temperature | 6 | |
| Line regulation (all other devices) | dVOUT/dVIN | 0.1 | 1 | ppm/V | VIN = VOUT + 0.2 V | 6 | |
| Line regulation over temperature (all devices) | dVOUT/dVIN | 0.2 | 1 | ppm/V | Over temperature | 6 | |
| Load regulation | dVOUT/dILOAD | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V | 6 | |
| Load regulation over temperature | dVOUT/dILOAD | 50 | ppm/mA | Over temperature, –10 mA < ILOAD < +10 mA | 6 | ||
| Power supply, quiescent current | 0.8 | 1 | mA | 6 | |||
| Power supply, quiescent current over temperature | 1.2 | mA | Over temperature | 6 | |||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -55 | 125 | °C | 6 | |||
| Power supply voltage | VS | 18 | V | See Note (1); VOUT + 0.2 V minimum is printed, not numeric | 6 | ||
| Supply input voltage (recommended) | VIN | 18 | V | Minimum printed as VOUT + 0.2 V | 5 | ||
| Input voltage (absolute maximum) | 18 | V | 4 | ||||
| Output short-circuit | 30 | mA | 4 | ||||
| Operating temperature (absolute maximum) | -40 | 125 | °C | 4 | |||
| Junction temperature (TJ max) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model (HBM) | V(ESD) | -500 | 500 | V | Per AEC Q100-002; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 | |
| ESD charged-device model (CDM) | V(ESD) | -1000 | 1000 | V | Per AEC Q100-011; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 | |
| ESD machine model (MM) | V(ESD) | 200 | V | REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 | ||
| Output voltage | VOUT | 5 | V | 5 | |||
| Output voltage noise | 15 | μVPP | f = 0.1 Hz to 10 Hz | 5 | |||
| Short-circuit current | ISC | 25 | mA | VOUT = 0 V | 6 | ||
| Thermal hysteresis, standard grade | 10 | ppm | Cycle 1 | 6 | |||
| Thermal hysteresis, standard grade | 5 | ppm | Cycle 2 | 6 | |||
| Long-term stability | 90 | ppm/1000 hr | 0 to 1000 hours | 6 | |||
| Long-term stability | 10 | ppm/1000 hr | 1000 to 2000 hours | 6 | |||
| Voltage output, TEMP pin | 575 | mV | At TA = 25°C | 6 | |||
| Temperature sensitivity, TEMP pin | 2.64 | mV/°C | Over temperature | 6 | |||
| Turn-on settling time | 200 | μs | To 0.1% with CL = 1 μF | 6 | |||
| Junction-to-ambient thermal resistance (D, SOIC 8 pins) | RθJA | 107.1 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (D, SOIC 8 pins) | RθJC(top) | 48.8 | °C/W | 5 | |||
| Junction-to-board thermal resistance (D, SOIC 8 pins) | RθJB | 48.3 | °C/W | 5 | |||
| Junction-to-top characterization parameter (D, SOIC 8 pins) | ψJT | 6.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter (D, SOIC 8 pins) | ψJB | 47.6 | °C/W | 5 | |||
| Thermal resistance | 150 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
REF5050AQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5050aqdrq1-etched.step/ref5050aqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5050aqdrq1.step/ref5050aqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
908e1bb3275e2398, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF5050AQDRQ1
**Texas Instruments** · Voltage Reference · SOIC-8
REF5050AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; do not use. |
| 2 | VIN | power_in | Input supply voltage, requiring VOUT + 0.2 V (or 2.7 V minimum for VOUT ≤ 2.5 V) up to 18 V. |
| 3 | TEMP | output | Temperature-dependent voltage output with approximately 60-kΩ source impedance, following VTEMP = 509 mV + 2.64 mV/°C × T. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM/NR | input | Trim and noise reduction pin providing ±15-mV adjustment of the device bandgap (and hence VOUT); a capacitor to GND with the internal 1-kΩ resistor forms a noise-reduction low-pass filter. |
| 6 | VOUT | output | Regulated reference voltage output, capable of sourcing/sinking up to ±10 mA. |
| 7 | NC | unconnected | No internal connection; do not use. |
| 8 | DNC | unconnected | Do not connect; do not use. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade | | -0.1 | | 0.1 | % | | 5 |
| Output voltage temperature drift, standard grade | dVOUT/dT | | 3 | 8 | ppm/°C | Over temperature | 6 |
| Line regulation (all other devices) | dVOUT/dVIN | | 0.1 | 1 | ppm/V | VIN = VOUT + 0.2 V | 6 |
| Line regulation over temperature (all devices) | dVOUT/dVIN | | 0.2 | 1 | ppm/V | Over temperature | 6 |
| Load regulation | dVOUT/dILOAD | | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V | 6 |
| Load regulation over temperature | dVOUT/dILOAD | | | 50 | ppm/mA | Over temperature, –10 mA < ILOAD < +10 mA | 6 |
| Power supply, quiescent current | | | 0.8 | 1 | mA | | 6 |
| Power supply, quiescent current over temperature | | | | 1.2 | mA | Over temperature | 6 |
| Specified temperature range | | -40 | | 125 | °C | | 6 |
| Operating temperature range | | -55 | | 125 | °C | | 6 |
| Power supply voltage | VS | | | 18 | V | See Note (1); VOUT + 0.2 V minimum is printed, not numeric | 6 |
| Supply input voltage (recommended) | VIN | | | 18 | V | Minimum printed as VOUT + 0.2 V | 5 |
| Input voltage (absolute maximum) | | | | 18 | V | | 4 |
| Output short-circuit | | | | 30 | mA | | 4 |
| Operating temperature (absolute maximum) | | -40 | | 125 | °C | | 4 |
| Junction temperature (TJ max) | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD human-body model (HBM) | V(ESD) | -500 | | 500 | V | Per AEC Q100-002; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 |
| ESD charged-device model (CDM) | V(ESD) | -1000 | | 1000 | V | Per AEC Q100-011; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 |
| ESD machine model (MM) | V(ESD) | | | 200 | V | REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group | 4 |
| Output voltage | VOUT | | 5 | | V | | 5 |
| Output voltage noise | | | 15 | | μVPP | f = 0.1 Hz to 10 Hz | 5 |
| Short-circuit current | ISC | | 25 | | mA | VOUT = 0 V | 6 |
| Thermal hysteresis, standard grade | | | 10 | | ppm | Cycle 1 | 6 |
| Thermal hysteresis, standard grade | | | 5 | | ppm | Cycle 2 | 6 |
| Long-term stability | | | 90 | | ppm/1000 hr | 0 to 1000 hours | 6 |
| Long-term stability | | | 10 | | ppm/1000 hr | 1000 to 2000 hours | 6 |
| Voltage output, TEMP pin | | | 575 | | mV | At TA = 25°C | 6 |
| Temperature sensitivity, TEMP pin | | | 2.64 | | mV/°C | Over temperature | 6 |
| Turn-on settling time | | | 200 | | μs | To 0.1% with CL = 1 μF | 6 |
| Junction-to-ambient thermal resistance (D, SOIC 8 pins) | RθJA | | 107.1 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance (D, SOIC 8 pins) | RθJC(top) | | 48.8 | | °C/W | | 5 |
| Junction-to-board thermal resistance (D, SOIC 8 pins) | RθJB | | 48.3 | | °C/W | | 5 |
| Junction-to-top characterization parameter (D, SOIC 8 pins) | ψJT | | 6.8 | | °C/W | | 5 |
| Junction-to-board characterization parameter (D, SOIC 8 pins) | ψJB | | 47.6 | | °C/W | | 5 |
| Thermal resistance | | | 150 | | °C/W | | 6 |
## CAD (KiCad official)
- Symbol: `REF5050AQDRQ1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ref5050aqdrq1-etched.step` / `ref5050aqdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref5050aqdrq1.step` / `ref5050aqdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ref5050a-q1) (26 pp, sha256 `908e1bb3275e2398`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref5050aqdrq1-datasheet.pdf)