main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ref5050aqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ref5050aqdrq1: viewers · Ray
package.json ref5050aqdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ref5050aqdrq1: specified limits as data (metadata.characteristics, 36 rows from the datasheet) · Ray
README.md ref5050aqdrq1: specified limits as data (metadata.characteristics, 36 rows from the datasheet) · Ray
ref5050aqdrq1-etched.fit.json ref5050aqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref5050aqdrq1-etched.glb ref5050aqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref5050aqdrq1-etched.step ref5050aqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref5050aqdrq1.glb Publish 0.1.0 · Ray
ref5050aqdrq1.kicad_mod Publish 0.1.0 · Ray
ref5050aqdrq1.kicad_sym Publish 0.1.0 · Ray
ref5050aqdrq1.lbr Publish 0.1.0 · Ray
ref5050aqdrq1.step Publish 0.1.0 · Ray

REF5050AQDRQ1

Texas Instruments · Voltage Reference · SOIC-8

REF5050AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect; do not use.
2 VIN power_in Input supply voltage, requiring VOUT + 0.2 V (or 2.7 V minimum for VOUT ≤ 2.5 V) up to 18 V.
3 TEMP output Temperature-dependent voltage output with approximately 60-kΩ source impedance, following VTEMP = 509 mV + 2.64 mV/°C × T.
4 GND power_in Ground reference for the device.
5 TRIM/NR input Trim and noise reduction pin providing ±15-mV adjustment of the device bandgap (and hence VOUT); a capacitor to GND with the internal 1-kΩ resistor forms a noise-reduction low-pass filter.
6 VOUT output Regulated reference voltage output, capable of sourcing/sinking up to ±10 mA.
7 NC unconnected No internal connection; do not use.
8 DNC unconnected Do not connect; do not use.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial accuracy, standard grade -0.1 0.1 % 5
Output voltage temperature drift, standard grade dVOUT/dT 3 8 ppm/°C Over temperature 6
Line regulation (all other devices) dVOUT/dVIN 0.1 1 ppm/V VIN = VOUT + 0.2 V 6
Line regulation over temperature (all devices) dVOUT/dVIN 0.2 1 ppm/V Over temperature 6
Load regulation dVOUT/dILOAD 20 30 ppm/mA –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V 6
Load regulation over temperature dVOUT/dILOAD 50 ppm/mA Over temperature, –10 mA < ILOAD < +10 mA 6
Power supply, quiescent current 0.8 1 mA 6
Power supply, quiescent current over temperature 1.2 mA Over temperature 6
Specified temperature range -40 125 °C 6
Operating temperature range -55 125 °C 6
Power supply voltage VS 18 V See Note (1); VOUT + 0.2 V minimum is printed, not numeric 6
Supply input voltage (recommended) VIN 18 V Minimum printed as VOUT + 0.2 V 5
Input voltage (absolute maximum) 18 V 4
Output short-circuit 30 mA 4
Operating temperature (absolute maximum) -40 125 °C 4
Junction temperature (TJ max) TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD human-body model (HBM) V(ESD) -500 500 V Per AEC Q100-002; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group 4
ESD charged-device model (CDM) V(ESD) -1000 1000 V Per AEC Q100-011; REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group 4
ESD machine model (MM) V(ESD) 200 V REF5020A-Q1, REF5040A-Q1 and REF5050A-Q1 group 4
Output voltage VOUT 5 V 5
Output voltage noise 15 μVPP f = 0.1 Hz to 10 Hz 5
Short-circuit current ISC 25 mA VOUT = 0 V 6
Thermal hysteresis, standard grade 10 ppm Cycle 1 6
Thermal hysteresis, standard grade 5 ppm Cycle 2 6
Long-term stability 90 ppm/1000 hr 0 to 1000 hours 6
Long-term stability 10 ppm/1000 hr 1000 to 2000 hours 6
Voltage output, TEMP pin 575 mV At TA = 25°C 6
Temperature sensitivity, TEMP pin 2.64 mV/°C Over temperature 6
Turn-on settling time 200 μs To 0.1% with CL = 1 μF 6
Junction-to-ambient thermal resistance (D, SOIC 8 pins) RθJA 107.1 °C/W 5
Junction-to-case (top) thermal resistance (D, SOIC 8 pins) RθJC(top) 48.8 °C/W 5
Junction-to-board thermal resistance (D, SOIC 8 pins) RθJB 48.3 °C/W 5
Junction-to-top characterization parameter (D, SOIC 8 pins) ψJT 6.8 °C/W 5
Junction-to-board characterization parameter (D, SOIC 8 pins) ψJB 47.6 °C/W 5
Thermal resistance 150 °C/W 6

CAD (KiCad official)

  • Symbol: REF5050AQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5050aqdrq1-etched.step / ref5050aqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5050aqdrq1.step / ref5050aqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 908e1bb3275e2398, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF