main
History Download
Ray ref5045aidr: one-pass backfill (citation: stored_copy, hero prebuilt (inputs unchanged)) 9d2aa64

REF5045AIDR

Texas Instruments · Voltage Reference · SOIC-8

REF5045AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect. This pin must be left floating; do not tie to any other net, power, or ground.
2 VIN power_in Input supply voltage. Operating range VOUT+0.2 V up to 18 V (min 2.7 V for VOUT ≤ 2.5 V). Absolute max 18 V, min -0.2 V.
3 TEMP output Temperature monitoring pin. Provides a temperature-dependent output voltage with typical sensitivity of 2.64 mV/°C over −40°C to 125°C. High-impedance output; buffer before loading.
4 GND power_in Ground return for the device. Connect to the analog ground plane.
5 TRIM/NR input Output adjustment and noise reduction pin. Allows fine trim of VOUT via an external resistor divider, and lowers output noise when bypassed to GND with a capacitor (typ 1 µF). May be left floating if trim/NR is not used.
6 VOUT power_out Reference voltage output, nominally 4.5 V for the REF5045. Sources or sinks up to ±10 mA. Requires a 1 µF to 10 µF ceramic output capacitor to GND for stability and low noise.
7 NC unconnected No internal connection. Pin is not bonded internally; may be left floating or tied to GND.
8 DNC unconnected Do not connect. This pin must be left floating; do not tie to any other net, power, or ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

  • REF5045AIDR
  • REF5045AIDRIDGK
  • REF5045AIDRIDGKR
  • REF5045AIDRAIDGK
  • REF5045AIDRAIDGKR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial Accuracy: Standard Grade -0.1 0.1 % All voltage options 6
Output Voltage Temperature Drift, Standard-Grade dVOUT/dT 3 8 ppm/°C 6
Line Regulation ΔVO(ΔVI) 0.1 1 ppm/V VIN = (VOUT + 0.2) to 18 V 6
Line Regulation over temperature ΔVO(ΔVI) 0.2 1 ppm/V VIN = VOUT + 0.2 V, TA = –40°C to 125°C 6
Load Regulation ΔVO(ΔIL) 20 30 ppm/mA –10 mA < ILOAD < 10 mA, VIN = VOUT + 0.75 V 6
Load Regulation over temperature ΔVO(ΔIL) 50 ppm/mA –10 mA < ILOAD < 10 mA, VIN = VOUT + 0.75 V, TA = –40°C to 125°C 6
Short circuit current ISC 25 mA VOUT = 0 6
Thermal Hysteresis, Standard-Grade SOIC-8 Cycle 1 90 ppm Cycle 1 6
Thermal Hysteresis, Standard-Grade SOIC-8 Cycle 2 50 ppm Cycle 2 6
Long-Term Stability SOIC-8 0 to 1000 hours 100 ppm/1000 hr 0 to 1000 hours 6
Long-Term Stability SOIC-8 1000 to 2000 hours 50 ppm/1000 hr 1000 to 2000 hours 6
TEMP pin voltage output VTEMP 575 mV TA = 25°C 6
TEMP pin temperature sensitivity 2.64 mV/°C TA = -40°C to 125°C 6
Turnon Settling Time 200 µs To 0.1% with CL = 1 µF 6
Output Voltage Noise 3 µVPP/V f = 0.1 Hz to 10 Hz 6
Quiescent Current IQ 0.8 1 mA 7
Quiescent Current over temperature IQ 1.2 mA TA = -40°C to 125°C 7
Supply Voltage VS 18 V Minimum is VOUT + 0.2 V (see note 1) 7
Specified Temperature Range -40 125 °C 7
Operating Temperature Range -55 125 °C 7
Output Voltage (REF5045 nominal) VOUT 4.5 V 4
Input voltage VIN -0.2 18 V 5
Output short circuit -30 30 mA 5
Operating temperature -55 125 °C 5
Junction temperature (TJ max) TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input supply voltage (recommended) VIN 18 V Minimum is VOUT + 0.2 V 5
Output current (recommended) IOUT -10 10 mA 5
Junction-to-ambient thermal resistance, SOIC (D) RθJA 115 °C/W SOIC (D), 8 pins 5
Junction-to-case (top) thermal resistance, SOIC (D) RθJC(top) 63.4 °C/W SOIC (D), 8 pins 5
Junction-to-board thermal resistance, SOIC (D) RθJB 57.1 °C/W SOIC (D), 8 pins 5
Junction-to-top characterization parameter, SOIC (D) ψJT 15.4 °C/W SOIC (D), 8 pins 5
Junction-to-board characterization parameter, SOIC (D) ψJB 56.2 °C/W SOIC (D), 8 pins 5

CAD (KiCad official)

  • Symbol: REF5045AIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5045aidr-etched.step / ref5045aidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5045aidr.step / ref5045aidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 32f0fc27eb7cc7ff, retrieved 2026-08-17, tier: manufacturer) (maker link no longer resolves; copy stored with this page)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF