3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownREF5045AIDR
Texas Instruments · Voltage Reference · SOIC-8
REF5045AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect. This pin must be left floating; do not tie to any other net, power, or ground. |
| 2 | VIN | power_in | Input supply voltage. Operating range VOUT+0.2 V up to 18 V (min 2.7 V for VOUT ≤ 2.5 V). Absolute max 18 V, min -0.2 V. |
| 3 | TEMP | output | Temperature monitoring pin. Provides a temperature-dependent output voltage with typical sensitivity of 2.64 mV/°C over −40°C to 125°C. High-impedance output; buffer before loading. |
| 4 | GND | power_in | Ground return for the device. Connect to the analog ground plane. |
| 5 | TRIM/NR | input | Output adjustment and noise reduction pin. Allows fine trim of VOUT via an external resistor divider, and lowers output noise when bypassed to GND with a capacitor (typ 1 µF). May be left floating if trim/NR is not used. |
| 6 | VOUT | power_out | Reference voltage output, nominally 4.5 V for the REF5045. Sources or sinks up to ±10 mA. Requires a 1 µF to 10 µF ceramic output capacitor to GND for stability and low noise. |
| 7 | NC | unconnected | No internal connection. Pin is not bonded internally; may be left floating or tied to GND. |
| 8 | DNC | unconnected | Do not connect. This pin must be left floating; do not tie to any other net, power, or ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
REF5045AIDRREF5045AIDRIDGKREF5045AIDRIDGKRREF5045AIDRAIDGKREF5045AIDRAIDGKR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy: Standard Grade | -0.1 | 0.1 | % | All voltage options | 6 | ||
| Output Voltage Temperature Drift, Standard-Grade | dVOUT/dT | 3 | 8 | ppm/°C | 6 | ||
| Line Regulation | ΔVO(ΔVI) | 0.1 | 1 | ppm/V | VIN = (VOUT + 0.2) to 18 V | 6 | |
| Line Regulation over temperature | ΔVO(ΔVI) | 0.2 | 1 | ppm/V | VIN = VOUT + 0.2 V, TA = –40°C to 125°C | 6 | |
| Load Regulation | ΔVO(ΔIL) | 20 | 30 | ppm/mA | –10 mA < ILOAD < 10 mA, VIN = VOUT + 0.75 V | 6 | |
| Load Regulation over temperature | ΔVO(ΔIL) | 50 | ppm/mA | –10 mA < ILOAD < 10 mA, VIN = VOUT + 0.75 V, TA = –40°C to 125°C | 6 | ||
| Short circuit current | ISC | 25 | mA | VOUT = 0 | 6 | ||
| Thermal Hysteresis, Standard-Grade SOIC-8 Cycle 1 | 90 | ppm | Cycle 1 | 6 | |||
| Thermal Hysteresis, Standard-Grade SOIC-8 Cycle 2 | 50 | ppm | Cycle 2 | 6 | |||
| Long-Term Stability SOIC-8 0 to 1000 hours | 100 | ppm/1000 hr | 0 to 1000 hours | 6 | |||
| Long-Term Stability SOIC-8 1000 to 2000 hours | 50 | ppm/1000 hr | 1000 to 2000 hours | 6 | |||
| TEMP pin voltage output | VTEMP | 575 | mV | TA = 25°C | 6 | ||
| TEMP pin temperature sensitivity | 2.64 | mV/°C | TA = -40°C to 125°C | 6 | |||
| Turnon Settling Time | 200 | µs | To 0.1% with CL = 1 µF | 6 | |||
| Output Voltage Noise | 3 | µVPP/V | f = 0.1 Hz to 10 Hz | 6 | |||
| Quiescent Current | IQ | 0.8 | 1 | mA | 7 | ||
| Quiescent Current over temperature | IQ | 1.2 | mA | TA = -40°C to 125°C | 7 | ||
| Supply Voltage | VS | 18 | V | Minimum is VOUT + 0.2 V (see note 1) | 7 | ||
| Specified Temperature Range | -40 | 125 | °C | 7 | |||
| Operating Temperature Range | -55 | 125 | °C | 7 | |||
| Output Voltage (REF5045 nominal) | VOUT | 4.5 | V | 4 | |||
| Input voltage | VIN | -0.2 | 18 | V | 5 | ||
| Output short circuit | -30 | 30 | mA | 5 | |||
| Operating temperature | -55 | 125 | °C | 5 | |||
| Junction temperature (TJ max) | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input supply voltage (recommended) | VIN | 18 | V | Minimum is VOUT + 0.2 V | 5 | ||
| Output current (recommended) | IOUT | -10 | 10 | mA | 5 | ||
| Junction-to-ambient thermal resistance, SOIC (D) | RθJA | 115 | °C/W | SOIC (D), 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance, SOIC (D) | RθJC(top) | 63.4 | °C/W | SOIC (D), 8 pins | 5 | ||
| Junction-to-board thermal resistance, SOIC (D) | RθJB | 57.1 | °C/W | SOIC (D), 8 pins | 5 | ||
| Junction-to-top characterization parameter, SOIC (D) | ψJT | 15.4 | °C/W | SOIC (D), 8 pins | 5 | ||
| Junction-to-board characterization parameter, SOIC (D) | ψJB | 56.2 | °C/W | SOIC (D), 8 pins | 5 |
CAD (KiCad official)
- Symbol:
REF5045AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5045aidr-etched.step/ref5045aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5045aidr.step/ref5045aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
32f0fc27eb7cc7ff, retrieved 2026-08-17, tier: manufacturer) (maker link no longer resolves; copy stored with this page) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.