← Commit history

ref5040aidr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·9434583f68 · ·parent 6498dd9
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "REF5040AIDR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Voltage Reference",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ref5040a.pdf",+    "parts": {+      "symbol": "ref5040aidr.kicad_sym",+      "footprint": "ref5040aidr.kicad_mod",+      "model_3d": "ref5040aidr-etched.glb",+      "model_3d_plain": "ref5040aidr.glb",+      "model_3d_step": "ref5040aidr-etched.step",+      "model_3d_step_plain": "ref5040aidr.step",+      "lbr": "ref5040aidr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "DNC",+        "type": "unconnected",+        "description": "Do Not Connect. This pin is used internally by the factory; it must be left floating in the application. Do not tie to ground, supply, or any other net."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Positive supply input. Operating range is (VOUT + 0.2 V) up to +18 V (minimum 2.7 V for VOUT ≤ 2.5 V). Bypass with 1 µF to 10 µF to GND close to the pin."+      },+      {+        "number": "3",+        "name": "TEMP",+        "type": "output",+        "description": "Temperature-proportional voltage output. VTEMP ≈ 509 mV + 2.64 mV/°C · T(°C) with ~60 kΩ source impedance. Buffer with a low-drift op-amp (e.g. OPA333/335/376) before driving any load; loading directly introduces measurement error but does not affect VOUT."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground / 0 V reference. All voltages (VIN, VOUT, TRIM/NR, TEMP) are referred to this pin."+      },+      {+        "number": "5",+        "name": "TRIM/NR",+        "type": "bidirectional",+        "description": "Trim and noise-reduction pin - provides access to the internal bandgap node. Connect a 1 µF (or larger) capacitor to GND to form a low-pass filter with the internal 60 kΩ/… resistor network (fc ≈ 10-20 Hz), halving output noise. Alternatively, drive with an external resistor network to trim VOUT by ±15 mV. Leave floating if unused."+      },+      {+        "number": "6",+        "name": "VOUT",+        "type": "output",+        "description": "Precision reference voltage output - 4.096 V nominal for REF5040. Load capacitor CL = 1 µF to 50 µF to GND required for stability; ESR of CL must be ≤ 1.5 Ω (recommended 1-1.5 Ω for lowest noise). Can source and sink up to ±10 mA."+      },+      {+        "number": "7",+        "name": "DNC",+        "type": "unconnected",+        "description": "Do Not Connect. Factory-use pin; must be left floating. Do not tie to ground, supply, or any other net."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No Internal Connection. This pin has no bond to the die and may be left floating or tied to any convenient net (though best practice is to leave it open)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}