← Commit history

Initial commit: component/ref5040aidr

Ray ·76fc62a574 ·
2 files changed +87
README.mdadded+53
@@ -0,0 +1,53 @@+# REF5040AIDR++**Texas Instruments** · Voltage Reference · SOIC-8++REF5040AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DNC | unconnected | Do Not Connect. This pin is used internally by the factory; it must be left floating in the application. Do not tie to ground, supply, or any other net. |+| 2 | VIN | power_in | Positive supply input. Operating range is (VOUT + 0.2 V) up to +18 V (minimum 2.7 V for VOUT ≤ 2.5 V). Bypass with 1 µF to 10 µF to GND close to the pin. |+| 3 | TEMP | output | Temperature-proportional voltage output. VTEMP ≈ 509 mV + 2.64 mV/°C · T(°C) with ~60 kΩ source impedance. Buffer with a low-drift op-amp (e.g. OPA333/335/376) before driving any load; loading directly introduces measurement error but does not affect VOUT. |+| 4 | GND | power_in | Device ground / 0 V reference. All voltages (VIN, VOUT, TRIM/NR, TEMP) are referred to this pin. |+| 5 | TRIM/NR | bidirectional | Trim and noise-reduction pin - provides access to the internal bandgap node. Connect a 1 µF (or larger) capacitor to GND to form a low-pass filter with the internal 60 kΩ/… resistor network (fc ≈ 10-20 Hz), halving output noise. Alternatively, drive with an external resistor network to trim VOUT by ±15 mV. Leave floating if unused. |+| 6 | VOUT | output | Precision reference voltage output - 4.096 V nominal for REF5040. Load capacitor CL = 1 µF to 50 µF to GND required for stability; ESR of CL must be ≤ 1.5 Ω (recommended 1-1.5 Ω for lowest noise). Can source and sink up to ±10 mA. |+| 7 | DNC | unconnected | Do Not Connect. Factory-use pin; must be left floating. Do not tie to ground, supply, or any other net. |+| 8 | NC | unconnected | No Internal Connection. This pin has no bond to the die and may be left floating or tied to any convenient net (though best practice is to leave it open). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `REF5040AIDR`+- `REF5040AIDRAIDT`+- `REF5040AIDRIDT`+- `REF5040AIDRAIDGK`+- `REF5040AIDRAIDGKR`+- `REF5040AIDRIDGK`+- `REF5040AIDRIDGKR`++## CAD (KiCad official)++- Symbol: `REF5040AIDR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ref5040a.pdf) (None pp, sha256 `3a122a4697547349`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ref5040aidr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ref5040aidr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Reference, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ref5040aidr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ref5040aidr.kicad_sym",+    "ref5040aidr.kicad_mod",+    "ref5040aidr.glb",+    "ref5040aidr.step",+    "ref5040aidr.lbr",+    "docs/hero.png",+    "docs/ref5040aidr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file