main
History Download
Ray Publish 0.1.0 72b926d

REF5025EIDR

Texas Instruments · IC · SOIC-8

REF5025EIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device enable control: a low level disables the reference output and puts the device in shutdown; enable by driving above 1.6 V or leaving the pin floating.
2 VIN power_in Input supply voltage; recommended range is VOUT + 0.2 V to 42 V for the REF50xxEI grade.
3 TEMP output Temperature-monitoring output with a temperature-dependent voltage (VTEMP = 625 mV + 2.64 mV/°C × T for REF50xxEI) and approximately 60 kΩ source impedance, so it should be buffered when loaded.
4 GND power_in Ground reference for the device.
5 NR passive Noise-reduction pin for the REF50xxEI grade, with a recommended voltage range of 0 V to 6 V; it is used with an external filter capacitor (e.g., 1 µF) to reduce output noise.
6 VOUT power_out Reference voltage output, capable of sourcing and sinking up to ±10 mA of output current.
7 NC unconnected No internal connection; leave floating or connect to GND.
8 DNC unconnected Do not connect.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (absolute max, REF50xxEI) VIN -0.3 48 V REF50xxEI (footnote 3) 5
Output voltage (absolute max) VOUT -0.3 5.5 V 5
Operating temperature (absolute max) TA -55 125 °C 5
Junction temperature (TJ max) TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Input voltage (recommended, REF50xxEI) VIN 42 V REF50xxEI (footnote 3) 5
Noise reduction pin voltage (NR) NR 0 6 V REF50xxEI (footnote 3) 5
Output current IOUT -10 10 mA 5
Operating ambient temperature TA -40 25 125 °C 5
Supply voltage VS VS 42 V See note 9
Initial accuracy IA -0.025 0.025 % All voltage options 9
Output voltage temperature drift dVOUT/dT 2.5 ppm/℃ TA = -40°C to 125°C 9
Line regulation ΔVO(ΔVI) 1 3 ppm/V VIN = (VOUT + 0.2V) to 42V 9
Line regulation over temperature ΔVO(ΔVI) 1 5 ppm/V VIN = VOUT + 0.2V to 42V, TA = -40°C to 125°C 9
Load regulation ΔVO(ΔIL) 5 25 ppm/mA -10mA < IOUT < 10mA, VIN = VOUT + 0.75V 9
Stable output capacitor range CL 1 100 µF -40℃ ≤ TA ≤ 125℃ 9
Quiescent current 480 µA -40°C ≤ TA ≤ 125°C 9
Enable voltage, active mode VEN 1.6 V Active mode (EN = 1) 9
Enable voltage, shutdown mode VEN 0.5 V Shutdown Mode (EN = 0) 9
Specified temperature range -40 125 °C 10
Load regulation over temperature ΔVO(ΔIL) 35 ppm/mA 10mA < IOUT < 10mA, VIN = VOUT + 0.75V, TA = -40°C to 125°C 9
Short circuit current ISC 21 mA VOUT = 0 9
Thermal hysteresis, cycle 1 TH 80 ppm SOIC-8 Cycle 1 9
Thermal hysteresis, cycle 2 TH 20 ppm SOIC-8 Cycle 2 9
Long-term stability, 0 to 1000 hours ΔVOUT_LTD 25 ppm SOIC-8, 0 to 1000 hours 9
Long-term stability, 1000 to 2000 hours ΔVOUT_LTD 10 ppm SOIC-8, 1000 to 2000 hours 9
Output voltage (REF5025E) VOUT 2.5 V 9
Low frequency noise enpp 0.5 µVPP/V f = 0.1Hz to 10Hz 9
Output voltage noise en 0.8 µVrms/V f = 10Hz to 1kHz 9
Turn-on settling time 400 µs To 0.1% with CL = 1μF 9
Stable input capacitor range CIN 0.1 µF -40℃ ≤ TA ≤ 125℃ 9
Quiescent current 340 µA 9
Shutdown current 10 µA VEN = 0V 9
Thermal resistance junction-to-ambient (SOIC) RθJA 120 °C/W REF50xxEI, D (SOIC) 8 pins 6
Thermal resistance junction-to-case (top, SOIC) RθJC(top) 52 °C/W REF50xxEI, D (SOIC) 8 pins 6
Thermal resistance junction-to-board (SOIC) RθJB 66 °C/W REF50xxEI, D (SOIC) 8 pins 6
Junction-to-top characterization parameter (SOIC) ΨJT 9.8 °C/W REF50xxEI, D (SOIC) 8 pins 6
Junction-to-board characterization parameter (SOIC) ΨJB 64.7 °C/W REF50xxEI, D (SOIC) 8 pins 6

CAD (KiCad official)

  • Symbol: REF5025EIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5025eidr-etched.step / ref5025eidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5025eidr.step / ref5025eidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 33b13191ad54693f, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF