Generated by kicad-footprint-generator · KiCad file format 20260206
REF5025EIDR
Texas Instruments · IC · SOIC-8
REF5025EIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable control: a low level disables the reference output and puts the device in shutdown; enable by driving above 1.6 V or leaving the pin floating. |
| 2 | VIN | power_in | Input supply voltage; recommended range is VOUT + 0.2 V to 42 V for the REF50xxEI grade. |
| 3 | TEMP | output | Temperature-monitoring output with a temperature-dependent voltage (VTEMP = 625 mV + 2.64 mV/°C × T for REF50xxEI) and approximately 60 kΩ source impedance, so it should be buffered when loaded. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | NR | passive | Noise-reduction pin for the REF50xxEI grade, with a recommended voltage range of 0 V to 6 V; it is used with an external filter capacitor (e.g., 1 µF) to reduce output noise. |
| 6 | VOUT | power_out | Reference voltage output, capable of sourcing and sinking up to ±10 mA of output current. |
| 7 | NC | unconnected | No internal connection; leave floating or connect to GND. |
| 8 | DNC | unconnected | Do not connect. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute max, REF50xxEI) | VIN | -0.3 | 48 | V | REF50xxEI (footnote 3) | 5 | |
| Output voltage (absolute max) | VOUT | -0.3 | 5.5 | V | 5 | ||
| Operating temperature (absolute max) | TA | -55 | 125 | °C | 5 | ||
| Junction temperature (TJ max) | TJ | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Input voltage (recommended, REF50xxEI) | VIN | 42 | V | REF50xxEI (footnote 3) | 5 | ||
| Noise reduction pin voltage (NR) | NR | 0 | 6 | V | REF50xxEI (footnote 3) | 5 | |
| Output current | IOUT | -10 | 10 | mA | 5 | ||
| Operating ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Supply voltage VS | VS | 42 | V | See note | 9 | ||
| Initial accuracy | IA | -0.025 | 0.025 | % | All voltage options | 9 | |
| Output voltage temperature drift | dVOUT/dT | 2.5 | ppm/℃ | TA = -40°C to 125°C | 9 | ||
| Line regulation | ΔVO(ΔVI) | 1 | 3 | ppm/V | VIN = (VOUT + 0.2V) to 42V | 9 | |
| Line regulation over temperature | ΔVO(ΔVI) | 1 | 5 | ppm/V | VIN = VOUT + 0.2V to 42V, TA = -40°C to 125°C | 9 | |
| Load regulation | ΔVO(ΔIL) | 5 | 25 | ppm/mA | -10mA < IOUT < 10mA, VIN = VOUT + 0.75V | 9 | |
| Stable output capacitor range | CL | 1 | 100 | µF | -40℃ ≤ TA ≤ 125℃ | 9 | |
| Quiescent current | 480 | µA | -40°C ≤ TA ≤ 125°C | 9 | |||
| Enable voltage, active mode | VEN | 1.6 | V | Active mode (EN = 1) | 9 | ||
| Enable voltage, shutdown mode | VEN | 0.5 | V | Shutdown Mode (EN = 0) | 9 | ||
| Specified temperature range | -40 | 125 | °C | 10 | |||
| Load regulation over temperature | ΔVO(ΔIL) | 35 | ppm/mA | 10mA < IOUT < 10mA, VIN = VOUT + 0.75V, TA = -40°C to 125°C | 9 | ||
| Short circuit current | ISC | 21 | mA | VOUT = 0 | 9 | ||
| Thermal hysteresis, cycle 1 | TH | 80 | ppm | SOIC-8 Cycle 1 | 9 | ||
| Thermal hysteresis, cycle 2 | TH | 20 | ppm | SOIC-8 Cycle 2 | 9 | ||
| Long-term stability, 0 to 1000 hours | ΔVOUT_LTD | 25 | ppm | SOIC-8, 0 to 1000 hours | 9 | ||
| Long-term stability, 1000 to 2000 hours | ΔVOUT_LTD | 10 | ppm | SOIC-8, 1000 to 2000 hours | 9 | ||
| Output voltage (REF5025E) | VOUT | 2.5 | V | 9 | |||
| Low frequency noise | enpp | 0.5 | µVPP/V | f = 0.1Hz to 10Hz | 9 | ||
| Output voltage noise | en | 0.8 | µVrms/V | f = 10Hz to 1kHz | 9 | ||
| Turn-on settling time | 400 | µs | To 0.1% with CL = 1μF | 9 | |||
| Stable input capacitor range | CIN | 0.1 | µF | -40℃ ≤ TA ≤ 125℃ | 9 | ||
| Quiescent current | 340 | µA | 9 | ||||
| Shutdown current | 10 | µA | VEN = 0V | 9 | |||
| Thermal resistance junction-to-ambient (SOIC) | RθJA | 120 | °C/W | REF50xxEI, D (SOIC) 8 pins | 6 | ||
| Thermal resistance junction-to-case (top, SOIC) | RθJC(top) | 52 | °C/W | REF50xxEI, D (SOIC) 8 pins | 6 | ||
| Thermal resistance junction-to-board (SOIC) | RθJB | 66 | °C/W | REF50xxEI, D (SOIC) 8 pins | 6 | ||
| Junction-to-top characterization parameter (SOIC) | ΨJT | 9.8 | °C/W | REF50xxEI, D (SOIC) 8 pins | 6 | ||
| Junction-to-board characterization parameter (SOIC) | ΨJB | 64.7 | °C/W | REF50xxEI, D (SOIC) 8 pins | 6 |
CAD (KiCad official)
- Symbol:
REF5025EIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5025eidr-etched.step/ref5025eidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5025eidr.step/ref5025eidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
33b13191ad54693f, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).