Generated by kicad-footprint-generator · KiCad file format 20260206
REF4132B33DBVR
Texas Instruments · Voltage References · SOT-23-5
REF4132B33DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; the datasheet says to leave it floating. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Enable pin that enables or disables the device; the recommended enable voltage range is 0 V to VIN. |
| 4 | VIN | power_in | Reference voltage input; the recommended input voltage is VREF + VDO up to 5.5 V, and the absolute maximum is 6 V. |
| 5 | VREF | power_in | Reference voltage output, rated for ±10 mA recommended output current with a 20 mA absolute maximum short-circuit current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (TA = 25°C) | -0.05 | 0.05 | % | TA = 25°C | 5 | ||
| Output voltage temperature coefficient (B grade) | 30 | ppm/℃ | -40°C ≤ TA ≤ 125°C, REF4132 B grade | 5 | |||
| Line regulation | ΔVREF/ΔVIN | 2 | 15 | ppm/V | VREF + VDO ≤ VIN ≤ 5.5 V | 5 | |
| Load regulation sourcing | ΔVREF/ΔIL | 20 | 120 | ppm/mA | IL = 0 mA to 10mA, VIN = VREF + VDO | 5 | |
| Quiescent current, active mode | IQ | 80 | 100 | µA | Active mode | 5 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 5 | µA | Shutdown mode, VEN = 0 V | 5 | |
| Enable pin voltage, active mode | VEN | 1.6 | V | Voltage reference in active mode (EN=1) | 5 | ||
| Enable pin voltage, shutdown mode | VEN | 0.5 | V | Voltage reference in shutdown mode (EN=0) | 5 | ||
| Enable pin current | IEN | 1 | 2 | µA | VEN = 5.5 V | 5 | |
| Dropout voltage | VDO | 50 | 100 | mV | IL = 0 mA | 5 | |
| Dropout voltage at load | VDO | 500 | mV | IL = 10 mA | 5 | ||
| Short circuit current | ISC | 11.5 | 18 | mA | VREF = 0 V | 5 | |
| Turn-on time | tON | 2.5 | ms | 0.1% settling, CL = 1 µF, 10% to 90% | 5 | ||
| Stable output capacitor range | CL | 0.1 | 10 | µF | 5 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 6 | V | 4 | ||
| Enable voltage (absolute maximum) | VEN | -0.3 | V | Printed maximum VIN + 0.3 | 4 | ||
| Output voltage (absolute maximum) | VREF | -0.3 | 5.5 | V | 4 | ||
| Output short circuit current (absolute maximum) | ISC | 20 | mA | 4 | |||
| Operating temperature range (absolute maximum) | TA | -55 | 150 | °C | Over operating free-air temperature range | 4 | |
| Storage temperature range | Tstg | -65 | 170 | °C | 4 | ||
| Input voltage (recommended) | VIN | 5.5 | V | Printed minimum VREF + VDO | 4 | ||
| Enable voltage (recommended) | VEN | 0 | V | Printed maximum VIN | 4 | ||
| Output current (recommended) | IL | -10 | 10 | mA | 4 | ||
| Operating temperature (recommended) | TA | -40 | 25 | 125 | ℃ | 4 | |
| Output voltage (nominal, 3.3 V variant) | VOUT | 3.3 | V | 3 | |||
| Low frequency noise (0.1 Hz to 10 Hz) | en(p-p) | 15 | ppmp-p | ƒ = 0.1 Hz to 10 Hz | 5 | ||
| Wide band noise (10 Hz to 10 kHz) | en | 24 | µVrms | ƒ = 10 Hz to 10 kHz | 5 | ||
| Long-term stability | 30 | ppm | 0 to 1000h at 35℃ | 5 | |||
| Output voltage hysteresis | VHYST | 35 | ppm | TA= 25℃ to −40℃ to 125℃ to 25℃ | 5 | ||
| Junction-to-ambient thermal resistance (DBV, 5 pins) | RθJA | 185 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 156 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 29.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | 33.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 29.1 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
REF4132B33DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref4132b33dbvr-etched.step/ref4132b33dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref4132b33dbvr.step/ref4132b33dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
27f36fac2364a3df, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).