Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF4132B33DBVR

Texas Instruments · Voltage References · SOT-23-5

REF4132B33DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; the datasheet says to leave it floating.
2 GND power_in Ground reference pin.
3 EN input Enable pin that enables or disables the device; the recommended enable voltage range is 0 V to VIN.
4 VIN power_in Reference voltage input; the recommended input voltage is VREF + VDO up to 5.5 V, and the absolute maximum is 6 V.
5 VREF power_in Reference voltage output, rated for ±10 mA recommended output current with a 20 mA absolute maximum short-circuit current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (TA = 25°C) -0.05 0.05 % TA = 25°C 5
Output voltage temperature coefficient (B grade) 30 ppm/℃ -40°C ≤ TA ≤ 125°C, REF4132 B grade 5
Line regulation ΔVREF/ΔVIN 2 15 ppm/V VREF + VDO ≤ VIN ≤ 5.5 V 5
Load regulation sourcing ΔVREF/ΔIL 20 120 ppm/mA IL = 0 mA to 10mA, VIN = VREF + VDO 5
Quiescent current, active mode IQ 80 100 µA Active mode 5
Quiescent current, shutdown mode IQ 2.5 5 µA Shutdown mode, VEN = 0 V 5
Enable pin voltage, active mode VEN 1.6 V Voltage reference in active mode (EN=1) 5
Enable pin voltage, shutdown mode VEN 0.5 V Voltage reference in shutdown mode (EN=0) 5
Enable pin current IEN 1 2 µA VEN = 5.5 V 5
Dropout voltage VDO 50 100 mV IL = 0 mA 5
Dropout voltage at load VDO 500 mV IL = 10 mA 5
Short circuit current ISC 11.5 18 mA VREF = 0 V 5
Turn-on time tON 2.5 ms 0.1% settling, CL = 1 µF, 10% to 90% 5
Stable output capacitor range CL 0.1 10 µF 5
Input voltage (absolute maximum) VIN -0.3 6 V 4
Enable voltage (absolute maximum) VEN -0.3 V Printed maximum VIN + 0.3 4
Output voltage (absolute maximum) VREF -0.3 5.5 V 4
Output short circuit current (absolute maximum) ISC 20 mA 4
Operating temperature range (absolute maximum) TA -55 150 °C Over operating free-air temperature range 4
Storage temperature range Tstg -65 170 °C 4
Input voltage (recommended) VIN 5.5 V Printed minimum VREF + VDO 4
Enable voltage (recommended) VEN 0 V Printed maximum VIN 4
Output current (recommended) IL -10 10 mA 4
Operating temperature (recommended) TA -40 25 125 ℃ 4
Output voltage (nominal, 3.3 V variant) VOUT 3.3 V 3
Low frequency noise (0.1 Hz to 10 Hz) en(p-p) 15 ppmp-p ƒ = 0.1 Hz to 10 Hz 5
Wide band noise (10 Hz to 10 kHz) en 24 µVrms ƒ = 10 Hz to 10 kHz 5
Long-term stability 30 ppm 0 to 1000h at 35℃ 5
Output voltage hysteresis VHYST 35 ppm TA= 25℃ to −40℃ to 125℃ to 25℃ 5
Junction-to-ambient thermal resistance (DBV, 5 pins) RθJA 185 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 156 °C/W 4
Junction-to-board thermal resistance RθJB 29.6 °C/W 4
Junction-to-top characterization parameter ΨJT 33.8 °C/W 4
Junction-to-board characterization parameter ΨJB 29.1 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: REF4132B33DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ref4132b33dbvr-etched.step / ref4132b33dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref4132b33dbvr.step / ref4132b33dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 27f36fac2364a3df, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF